Electronic Converters

Switch/Converter features pushbutton on front panel.
Electronic Converters

Switch/Converter features pushbutton on front panel.

Facilitating access to any one of 8 separate fiber optic networks, QuickSwitch Model 4193 with pushbutton eliminates plugging and unplugging of fiber optic patchcords, minimizing connector wear. Internal circuitry ensures isolation between networks/devices, where as common port converts selected fiber optic network port to 100BaseTX interface. Eight network ports of switch are 1,300 nm 100 Mbps...

Read More »
Electronic Converters

HD/SD SDI to HDMI Converter features re-clocked SDI outputs.

Capable of converting up to 3G SDI signals to HDMI compliant format, Series AT-2GSDI-HD Re-clockable Converter functions as splitter, allowing for multiple displays or recording decks. Unit also features HDMI output that matches clock rate of input source, providing lossless synced signal. Supporting up to 8 channels of audio, AT-2GSDI-HD is fully compatible with Dolby 7.1 and 5.1 surround sound.

Read More »
USB to Serial Converter is packaged in DB9 form factor.
Electronic Converters

USB to Serial Converter is packaged in DB9 form factor.

CE-USB USB2.0-to-RS232 adapter uses DB9 pcb pad pinout to allow updates to older serial products without any layout changes, and adds USB interface into existing serial products with no software or hardware redesign required. Device draws 35 mA from USB port, and drivers allow it to appear to operating system as additional COM port. It sends 8-bit asynchronous serial data at selectable speeds...

Read More »
Electronic Converters

Ethernet Fiber Converter has link failure alert function.

Designed for both optical and electrical networks, AASMA830AS, 10/100M adaptive fast Ethernet fiber converter has transmission distance of 120 km over copper wires. It conducts mutual conversion between 10Base-T/100Base-TX twisted pair electrical signals and 100Base-FX optical signals. Supported transmission are in dual-fiber multi-mode, dual-fiber single-mode and single-fiber single-mode fibers.

Read More »
Converters offer serial connectivity for USB-equipped PCs.
Electronic Converters

Converters offer serial connectivity for USB-equipped PCs.

Fully USB v1.1 and v2.0 compliant, Models USB-4604B and USB-4604BM are USB to 4-port RS-232 and USB to 4-port RS-232/422/485 converters, respectively. Both feature 16 kV ESD, serial communication rates up to 921.6 kbps, and standard DB9 male connectors. Model USB-4604BM provides software selectable RS-232/422/485 settings for each port and automatic RS-485 send data control. Packaged in ABS...

Read More »
Loop Converter bridges HART and analog signals.
Electronic Converters

Loop Converter bridges HART and analog signals.

Acting as transmitter power supply and HART monitor, HART Loop Converter (HLC) lets users access digital information from HART-enabled field devices and make it available to analog process control as 4-20 mA signals. Up to 3 HART signals can be monitored simultaneously and are provided as independent analog signals, or HLC can provide one signal via 3 analog channels to send to different systems....

Read More »
Interface Converter suits RS485 multi-point applications.
Electronic Converters

Interface Converter suits RS485 multi-point applications.

ST fiber-to-multi-point RS485/422/232 interface converter Model 4152/4153 has typical operating speeds up to 1.5 Mbps for RS232 to fiber conversion and up to 5 Mbps for RS485/422 to fiber conversion. It features 3 kVdc isolation to prevent system ground loops, and ESD protection circuitry on all receivers and transmitters for both RS232 and RS485/422 interfaces. Unit is available in compact...

Read More »
Electronic Converters

ADC enables 12-bit resolution with 200 MHz signal bandwidth.

Delivering 550 MSPS sample rate, ADS54R463 allows for high IF and direct RF sampling architectures to simplify system design. It offers 64.1 dBFS SNR, 80 dBc SFDR at 450 MHz and 62.5 dBFS SNR, 70 dBc SFDR at 900 MHz, enabling efficient power amplifier linearization in digital pre-distortion solutions, as well as range and sensitivity in defense imaging and communication systems. Supplied in 14 x...

Read More »
Electronic Converters

DC/DC Converters come in IC-style surface mount packages.

Comprising 9 models with efficiency levels up to 70%, 1 Watt NTF Series is available with choice of 4-6, 9-15, and 18-36 V input voltages and tightly regulated output voltages of 5, 12, or 15 V. All devices provide 1 kVdc isolation and include voltage trim feature. Measuring 0.7 x 0.5 x 0.228 in., RoHS-compliant converters feature power density of 0.7 W/cmÂ-³, operating temperature of -40 to...

Read More »
Electro Standards Laboratories Announces New Products Designed for Casino VLT Networks
Electronic Converters

Electro Standards Laboratories Announces New Products Designed for Casino VLT Networks

Electro Standards Laboratories (ESL), Cranston, RI, has just announced its new family of products designed for Casino VLT Networks. The four models of HP Fiber to RS-232 and RS-485 converters allow connection of HP Fiber Optic Linked Terminals to the RS-232 and RS-485 ports of controllers. The Model 4154 HP Fiber Repeater with RS-232 Traffic Monitor Port is used to regenerate data signals in...

Read More »

All Topics