Electronic Converters

Electronic Converters

SoC Solutions offer up to 1 MSPS for data acquisition.

Available in 64-pin QFN package, 18-bit ADS8284 and 16-bit ADS8254 combine SAR data converters and peripherals and help develop high performance ADC front ends for precision applications including high-speed data acquisition, automated test equipment, and medical imaging. They feature 4-channel multiplexer, input operational amplifier, 6 ppm/°C reference, and reference buffer.

Read More »
Octal, 16-Bit, SPI-Enabled DAC achieves ±4 LSB INL (max).
Electronic Converters

Octal, 16-Bit, SPI-Enabled DAC achieves ±4 LSB INL (max).

Supplied in 20-pin 4 x 5 mm QFN and TSSOP packages, LTC2656 offers combination of 0.1% (max) gain error and ±2 mV (max) offset error ensures accuracy near supply rails and optimizes effective output range. Integrated precision reference achieves 2 ppm/°C typ and 10 ppm/°C max temperature coefficient. Operating from 2.7-5.5 V supply, IC offers 8.5 Â-µsec settling time for...

Read More »
I2C-Enabled, 16-Bit ADC is capable of 60 conversions/sec.
Electronic Converters

I2C-Enabled, 16-Bit ADC is capable of 60 conversions/sec.

Integrating precision reference (2 ppm/°C typ, 10 ppm/°C max) in 3 x 3 mm DFN and 4 x 5 mm MSOP packages, LTC2463 delta sigma ADC allows precise measurements without external reference. It operates from 2.7-5.5 V supply and measures ±1.25 V differential input range at output rates to 60 Hz, facilitating measurement of low-frequency sensor signals. Characteristics include 16-bit...

Read More »
Quad SPI DAC (16-Bit) achieves ±1 LSB INL and DNL.
Electronic Converters

Quad SPI DAC (16-Bit) achieves ±1 LSB INL and DNL.

Supplied in 7 x 8 mm QFN package, LTC2754-16 incorporates 4 DACs that can each be software-programmed or pin-strapped for 1 of 6 unipolar or bipolar output ranges via 4-wire serial interface. SoftSpan output voltage ranges include 2 unipolar ranges (0-5 V, 0-10 V) and 4 bipolar ranges (±10/±5/±2.5/-2.5 to +7.5 V). Along with 2 MHz multiplying bandwidth, features include voltage...

Read More »
Upconverter simplifies transceiver testing.
Electronic Converters

Upconverter simplifies transceiver testing.

Model 2891-IQ Upconverter processes analog I and Q baseband signals for testing transceiver's transmitter and also processes output signals for testing its receiver. Able to interface with RF transceivers with single-ended or differential inputs, it provides EVM floor of 41 dB to optimize modulation measurements. Unit's gain adjustments interface with various wireless chipsets and devices....

Read More »
RF Engines Ltd (RFEL) Wins New Contract with EONIC of the Netherlands
Electronic Converters

RF Engines Ltd (RFEL) Wins New Contract with EONIC of the Netherlands

Novel wideband downconverter for signal analysis" Newport, Isle of Wight, UK - 4 June 2009 -- RF Engines Limited (RFEL), the specialists in high performance signal processing design work, have been contracted by EONIC of Delft in the Netherlands for the development of a novel digital downconverter to be used in one of their latest signal processing platforms. The high-speed design will enable the...

Read More »
Electronic Converters

Ethernet Media Converter Transmits over Long Distances

Toronto, Canada- GAO Comm.(www.GAOCOmm.com) recommends its Plug and Play Ethernet media converter(GAO3005-2), which acts as a standalone unit or as a slide-in module to the converter rack or in a central wiring closet.0 Base-Fx fast Ethernet. Data signals converted by this high performance media converter can be transmitted over long distance. The converter supports both full-duplex and...

Read More »
A/D Converter targets image processing applications.
Electronic Converters

A/D Converter targets image processing applications.

DATEL Quad Sampling A/D converter, Model ADSQ-1410, is 14-bit, 10 MS/sec unit that converts full-scale step input signals at rate of 10 MHz. It offers 0.5 LSB RMS DC noise and dynamic performance of 80 dB, suiting it for time and multichannel frequency domain applications. Rising edge triggered start convert signal controls conversion of all 4 converters. Unit requires ±5 V for internal...

Read More »
Pulse Control Converter supplies time proportional output.
Electronic Converters

Pulse Control Converter supplies time proportional output.

Designed to mount directly to input terminals on 3-32 Vdc input solid state relay, APWM Series converts 4-20 mA input signal from process/temperature controller or computer to time proportional output. It supports single or 3-phase 50 or 60 Hz operation. Lever clamps are provided on converter for 4-20 mA input and relay's power section provides connection to line and load. Device tolerates inputs...

Read More »
Switch/Converter provides automatic fiber optic link backup.
Electronic Converters

Switch/Converter provides automatic fiber optic link backup.

Fully compliant with 802.3u 100 Base TX/FX standard, QuickSwitch® model 4195 fiber SC duplex to RJ45 auto fallback A/B switch/converter allows for accessing 2 separate SC duplex, multimode, 100 base FX ports from 100 Base TX fast Ethernet port. It has built-in fiber optic/twisted pair copper conversion. Unit allows for setting switch position manually or remotely when in A/B switch mode,...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers