Electronic Converters

Electronic Converters

ADCs integrate 10 ppm/°C max precision reference.

Housed in 3 x 3 mm DFN and 12-lead MSOP packages, Models LTC2470 and LTC2472 feature integrated 1.25 V reference that offers 2 ppm/°C drift and 0.1% initial accuracy for precise measurements in space-constrained applications. Both provide 16-bit no missing code resolution and selectable 250 S/sec or 1 kS/sec output rate. Operating from single 2.7-5.5 V supply, Models LTC2470 and LTC2472...

Read More »
Data Converter employs Xilinx Virtex-6 FPGA.
Electronic Converters

Data Converter employs Xilinx Virtex-6 FPGA.

Suitable for connection to HF or IF ports for communications, radar, telemetry, and medical systems, Model 71620 features three 200 MHz 16-bit TI ADS5485 A/Ds delivering input bandwidth of 350 MHz, and dual-channel 800 MHz 16-bit TI DAC5688 D/A providing 2 wideband analog outputs. Multichannel XMC module supports Gen 2 PCI Express as primary control and data streaming interface. With lane widths...

Read More »
Electronic Converters

Sigma-Delta ADCs offer minimal noise, power consumption.

Intended for portable industrial and medical instrumentation equipment, AD7170 and AD7171, respectively, achieve 12- and 16-bit noise-free resolution and have 125 Hz output data rate. Both come in 3 x 3 mm, 10-lead LFCSP with on-chip oscillator and consume 110 Â-µA nominally or 5 µA in power-down mode. Integral nonlinearity is ±0.1 LSB (least significant bit) at 12 bits and...

Read More »
Electronic Converters

High-speed 14-bit ADCs deliver low-power operation.

ADS4149 consumes as little as 275 mW per channel at 250 MS/sec while offering 72.5 -dB SNR at 100 MHz input frequency. Dynamic power scaling reduces power consumption to 215 mW at 160 MS/sec, and 1-6 -dB programmable gain option provides flexibility to trade off between SNR and spurious free dynamic range with lowered input voltage swing. Optional buffered analog input provides constant input...

Read More »
SiGe Passive Mixer suits LTE, WiMAX, WCS, and MMDS base stations.
Electronic Converters

SiGe Passive Mixer suits LTE, WiMAX, WCS, and MMDS base stations.

Suited for applications where common PC-board layout is used for both wireless-infrastructure frequency bands, MAX2042 offers 50-500 MHz IF frequency range with 1,800-3,000 MHz low-side LO injection range. When configured as downconverter, IC provides 36 dBm of IIP3, 23.4 dBm of IP1dB, 7.2 dB of conversion loss, and 7.3 dB noise figure. As upconverter, MAX2042 delivers 32.4 dBm of IIP3, 67 dBc of...

Read More »
Electronic Converters

Largest Portfolio of I²C-Compatible, Multichannel, 8-/10-/12-Bit ADCs Delivers Maximum Flexibility

Highly flexible, IÂ-²C-compatible multichannel ADCs have internal reference. SUNNYVALE, CA-November 9, 2009-Broadening its industry-leading portfolio of I²C-based ADCs, Maxim Integrated Products (NASDAQ: MXIM) introduces the MAX11600-MAX11617 multichannel ADCs with an internal voltage reference. Available in 188ksps, 8-bit (MAX11600-05) and 94.4ksps, 10-/12-bit (MAX11606-17)...

Read More »
High-Speed Digitizer offers signal peak detection/analysis.
Electronic Converters

High-Speed Digitizer offers signal peak detection/analysis.

Model U1084A is dual-channel, 8-bit PCIe digitizer, with 1.5 GHz bandwidth, which can include Agilent U1084A Signal Peak Detection firmware option that allows real-time acquisition/peak-detection up to 4 GS/sec. Unit incorporates 15 ps trigger time interpolator for accurate timing measurement as well as FPGA for real-time signal processing. Providing data throughput at up to 650 Mbps, 4-lane card...

Read More »
VME/VXS Digitizer meets needs of defense market.
Electronic Converters

VME/VXS Digitizer meets needs of defense market.

Model SVM4800 builds on modular U1083A VME/VXS base card with analog digitizer mezzanine that includes 2 DC-coupled 14-bit quad-ADCs. This 8-channel, 14-bit VME/VXS digitizer, with more than 300 MHz input signal bandwidth, achieves sampling rates up to 125 MS/sec. Additional analog performance characteristics - up to 82 dBc SFDR, 82 dBc THD, and over 70 dBc SNR - provide effective resolution of...

Read More »
DAC Development Kit Adaptor speeds system prototyping.
Electronic Converters

DAC Development Kit Adaptor speeds system prototyping.

Model DKXC5VADAPT-1 provides physical link between data headers on DK86064/65-2 development kits and HiTech Global V5-PCIE2 FPGA prototype board. Featuring 6 Samtec sockets that plug into headers on both boards, it connects 28 matched LVDS data pairs, DAC loop clock pairs, and 2 divided clock signals between both boards. All clock signals are routed to dedicated global clock inputs on FPGA....

Read More »
Flexible DIN-Rail Modules
Electronic Converters

Flexible DIN-Rail Modules

Suitable for food and beverage industry, pharmaceutics and biotechnology, chemistry and petrochemistry as well as for HVAC equipment With the FlexProgrammer 9901, FlexConv series easily configurable via PC Trip Amplifier loop-powered from a 4-20mA signal Power Supply 24VDC/22mA available for 115VAC or 230VAC With the DIN-rail modules, Baumer's product segment Process Instrumentation offers a wide...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers