Electronic Converters

Electronic Converters

Industrial Gigabit Media Converters survive harsh environments.

Comprised of models that support 0 to +45°C and -40 to +75°C operating ranges, iCON-32901 series provides reliable, stable 10/100/1000BaseTX to 1000BaseSX/LX/BX media conversion in harsh industrial environments. System reliability is enhanced via features such as Link Fault Pass Through, redundant power, and relay output alarm. Able to be mounted via DIN-rail, rack, or panel,...

Read More »
16-Bit SAR ADC 16-Bit supports 1 MS/sec sampling rate.
Electronic Converters

16-Bit SAR ADC 16-Bit supports 1 MS/sec sampling rate.

Available in 7 x 7 mm LQFP/QFN packages, LTC2393-16 achieves 94 dB SNR at up to max sample rate with no cycle latency. It operates from 5 V supply and supports ±4.096 V input range. Suited for general-purpose designs that require maximum signal swings to overcome background noise levels in industrial environments, ADC achieves 94 dB SNR and 105 dB THD. Along with parallel/serial interfaces,...

Read More »
Electronic Converters

Managed Media Converter Chassis features Green design.

Suitable for variety of applications from business fiber-to-the-premises to factory automation, 18-slot Model AT-CV5001 offers Fast Ethernet or Gigabit Media Conversion and supports all fiber types. Unit features energy-efficient power supply, which minimizes power consumption to 140 W. Chassis allows virtually any mix of alternating circuit or direct circuit power supplies with up to 2 redundant...

Read More »
Direct Box suits audio equipment with 3-pin XLR inputs.
Electronic Converters

Direct Box suits audio equipment with 3-pin XLR inputs.

Model SC800 Instrument Direct Box converts outputs of high-impedance line level audio devices to low-impedance, balanced, and isolated mic level signals. Product offers common mode rejection of greater than 100 dB at 60 Hz as well as input impedance of greater than 150 kW at 1 kHz and output impedance under 170 W at 1 kHz. Total harmonic distortion plus noise is less than .05% at 20 Hz, +4 dBu...

Read More »
Simultaneous-Sampling ADC delivers true 16-bit performance.
Electronic Converters

Simultaneous-Sampling ADC delivers true 16-bit performance.

Supplied in Pb-free TQFN package, MAX11046 eight-channel SAR ADC enables Class 0.2 precision for 220 V and measures up to 6 kV mandated by IEC 62053 and EN 50160 for polyphase power-grid monitoring and protection. Architecture provides on-chip, negative supply voltage, and true 16-bit performance is achieved via high-impedance bipolar input using single positive external supply. Input also...

Read More »
Low Pin Count Stereo ADC operates from single 3.3 V supply.
Electronic Converters

Low Pin Count Stereo ADC operates from single 3.3 V supply.

Requiring only 2 decoupling capacitors, low power WM8783 uses multi-bit Sigma Delta ADC architecture to offer high quality line input audio in recordable media applications, including LCD TVs, set top boxes, and DVD recorders. It achieves 95 dB SNR, -83 dB THD, and supports sample rates from 8-96 kHz. Offered in SOIC-8 package, ADC accepts analog inputs up to 1 Vrms and provides integrated high...

Read More »
Electronic Converters

Bipolar, 8-Channel DACs address low-power applications.

Available in 12-, 14- and 16-bit versions with either SPI or parallel interface, DAC87x8 series typically draws 14.8 mW/channel in normal mode and less than 170 Â-µW/channel in power-down mode. Internal 4x or 6x programmable gain provides bipolar ±16 V or unipolar 0-33 V output range across 8 channels, eliminating need for external amplifier. Also, product offers 10 µsec...

Read More »
Electronic Converters

Ethernet Converters comply with UL Class 1 Div 2.

Suited for hazardous environments, Models RUE-111SE-CDU and RUE-113SE-CDU are Industrial Ethernet to fiber units with one 10/100 Mbps Ethernet port and one fiber port. Model RUE-111SE-CDU features multimode port with transmission distance of 2 km, while Model RUE-113SE-CDU includes single mode fiber port with transmission distance of 30 km, both using SC connector. Supporting 12~48 Vdc and 24...

Read More »
RF-to-Digital Converter fosters automotive SDR integration.
Electronic Converters

RF-to-Digital Converter fosters automotive SDR integration.

Based on RF MicroDigitizer(TM) architecture, MT3511 harnesses RF and digital silicon technologies to bring software defined radio (SDR) to global automotive industry. Automotive-grade IC, optimized to work with generic, high-performance DSPs and multimedia processors, combines functions of RF tuner and ADC in one chip. It employs configurable, fully autonomous automatic gain control circuit and...

Read More »
Electronic Converters

Digital-to-Analog Converters integrate 10 ppm/°C reference.

Housed in 3 x 3 mm QFN and MSOP packages, Series LTC2635 includes LTC2635-H option with 2.5 V full-scale output and LTC2635-H option providing 4.096 V full-scale output. Quad 12-bit, 10-bit, and 8-bit rail-to-rail I2C DACs operate from single 2.7-5.5 V supply with supply current of 125 Â-µA. In addition to offering power-on reset to zero and mid-scale options, LTC2635-L also includes options...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers