Electronic Converters

Electronic Converters

American Fibertek Displays Full Product Suite at ISC West 2010

Upgraded V'nes Video Network Enterprise Solutions Take Center Stage, New Fiber Optic Transceivers and Redesigned Website Round Out Show Offerings. Las Vegas, NV (March 24, 2010) - American Fibertek, Inc. (AFI), the security industry's leading independent supplier of transmission solutions for security applications, is making another strong showing at ISC West 2010 with enhancements to their V'nes...

Read More »
Up-/Down-Converting SiGe Mixer covers LTE/WiMAX/MMDS applications.
Electronic Converters

Up-/Down-Converting SiGe Mixer covers LTE/WiMAX/MMDS applications.

Supplied in 5 x 5 mm TQFN package, passive MAX2044 supports high- and low-side LO injection architectures for 3.1-3.9 GHz LTE and WiMAX base stations. It can also be configured for 2.3-2.9 GHz LTE, WiMAX, and MMDS high-side injection architectures. As downconverter, IC provides 32.5 dBm of IIP3, 21 dBm of IP1dB, 7.7 dB conversion loss, and 8.5dB noise figure. When configured as upconverter, it...

Read More »
Electronic Converters

Monolithic Digital-to-Analog Converter optimizes MRI systems.

Offering 1 ppm resolution and accuracy, 20-bit Model AD5791, when used in MRI systems, optimizes image quality and enables precise control of magnetic gradient. Device features low noise of sub 1 ppm, refresh rate of 1 Â-µs, and output drift of sub 1 ppm, maximizing operational up-time by eliminating need to take MRI system offline for calibration cycles. Able to be configured for unipolar...

Read More »
Quad DAC includes internal reference and SPI interface.
Electronic Converters

Quad DAC includes internal reference and SPI interface.

Available with 16- or 12-bit resolution and internal 1.25 or 2.048 V reference, Series LTC2654 achieves 16-bit performance of ±4 LSB INL max over temperature with offset error of ±2 mV max and gain error of 0.1% max. Integrated reference achieves 2 ppm/°C typical and 10 ppm/°C maximum temperature coefficient. Operating from single 2.7-5.5 V supply, digital-to-analog...

Read More »
Electronic Converters

Fiber-to-USB Interface Converters suit government national labs.

Models 4166 (board only), 4165 (desktop), and 4165-DIN (DIN rail) provide integrated rate buffering and convert USB 2.0-compliant data from PC to serial asynchronous data interface over fiber with user-selectable baud rate up to 3 Mbps. Suited for PC communications requiring high-speed, secure communications and optical isolation, products feature ESD protection circuitry on USB I/O connector,...

Read More »
Moore Industries Ranked First Place in Signal Conditioners in Control Magazine Reader's Choice Awards 2010
Electronic Converters

Moore Industries Ranked First Place in Signal Conditioners in Control Magazine Reader's Choice Awards 2010

NORTH HILLS, CALIF. - Moore Industries, a leader in process control technologies, has been ranked first place in Signal Conditioners by Control Magazine Readers' Choice Awards 2010. The top technology category rankings represent end-user sentiment, as the 2010 Control Magazine Readers' Choice Awards were derived from the opinion of over 1,000 process automation professionals. The Control Magazine...

Read More »
PCI-Express Digitizer features 2 Virtex-5 FPGAs.
Electronic Converters

PCI-Express Digitizer features 2 Virtex-5 FPGAs.

Featuring 2 GB on-board memory configured as large FIFO and PCIe x8 bus, PX1500-4 A/D Board captures 4 synchronized channels at sampling rates up to 1.5 GHz, or 2 synchronized channels up to 3 GHz when interleaving ADC data. Board can continuously sustain long recordings at up to 1.4 GB/s through PCIe x8 bus to PC disk storage without break in analog record. Frequency synthesized clock allows ADC...

Read More »
PCI-Express Digitizer offers 1.2 GB/sec sustained recordings.
Electronic Converters

PCI-Express Digitizer offers 1.2 GB/sec sustained recordings.

Equipped with 2 Virtex-5 FPGAs, PX14400 A/D Board captures signal frequencies up to 200 MHz when using programmable gain amplifier in 1 dB steps, or up to 400 MHz if direct transformer coupled connection is employed. One GB on-board memory configured as large FIFO and PCIe x8 bus ensures board can continuously sustain recordings at over 1.2 GB/sec through PCI x8 bus to PC disk storage without...

Read More »
In-Line Charge Converters eliminate need for charge amplifiers.
Electronic Converters

In-Line Charge Converters eliminate need for charge amplifiers.

Featuring 2-wire configurations and fixed gain settings of 0.1, 1.0, and 10.0 mV/pC, Series 5810 and Series 5812 convert charge signal from high impedance piezoelectric sensor into voltage signal with low impedance output. Series 5812 contains 3 active signal channels with 3 individual 4 A current sources powered from common external standard DC power supply, while Series 5810 offers wide...

Read More »
Electronic Converters

Signal Converter bridges DVI /Mini DisplayPort signals on Macs.

With ability to render true pixel to pixel image on Mini DisplayPort products, Model DP400 is powered by USB 7 in. pigtail and also features DVI-D 7 in. pigtail, allowing users to connect to DVI-based computers and laptops. Designed to work with iMac 27 in. and larger displays that support resolutions up to 2,560 x 1,600, device enables users to extend desktop through attached Mini DisplayPort...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics