Electronic Converters

Electronic Converters

Highland Technology Has Announced the Latest in a Series of High-Precision VME Data Acquisition Modules, the V490 Analog Signal Digitizer

The module features sixteen channels with differential input ranges from ±10 millivolts to ±40 volts, with 16 bit resolution and 500 KHz sampling rate. Each channel includes programmable digital filtering and both realtime and FIFO buffered data. Channel inputs can be switched to a separate test connector for in-system calibration verification without disconnecting field wiring....

Read More »
Electronic Converters

Analog-to-Digital Converters feature 12-bit resolution.

Supplied in lead-free BGA package, Series ADC12D1x00 provides sampling speeds of 3.6, 3.2, and 2.0 GSPS. Units run off 1.9 V single supply and consist of 2 channels that can operate interleaved or independently. Devices include circuitry for multi-chip synchronization, programmable gain, and offset adjustment per channel. Internal track-and-hold amplifier and extended self-calibration scheme...

Read More »
Electronic Converters

14/16 Port Multi-Media Converter Rack Suitable for Connecting Evolving Networks

Toronto, Canada - GAO Fiber Optics (www.GAOFiberOptics.com) recommends this 14/16 port multi-media converter rack which is specifically designed to accommodate various slide-in media converter modules for multiple segment cross connections. With a slim, low profile chassis and accommodating a mix of 10Mbps, 100Mbps and Gigabit media converter cards, the integrated converter rack is an ideal...

Read More »
Moore Industries Award-Winning miniMOORE Multi-channel Signal Conditioners Acquire UL® Approval
Electronic Converters

Moore Industries Award-Winning miniMOORE Multi-channel Signal Conditioners Acquire UL® Approval

NORTH HILLS, CALIF. - Moore Industries has certified the award-winning line of miniMOORE Multi-Channel Signal Conditioners through Underwriters Laboratories Inc. (UL®). The 2-channel MIT and the 2- and 4-channel MIX miniMOORE(TM) products now meet UL 508 criteria-the UL safety standard for industrial control equipment. miniMOORE Signal Conditioners have received UL approval under...

Read More »
USB-to-Serial Converters provide ESD protection to ±15 KV.
Electronic Converters

USB-to-Serial Converters provide ESD protection to ±15 KV.

Supporting serial speed up to 921.6 Kbps, DirectPort-USB UC1 consists of 1-port USB-to-RS232 converter that provides serial COM port via USB port, while DirectPort-USB UC1B consists of 1-port USB-to-RS422/485 converter for multi-drop applications. Communication distance is 15 m for RS232 and 1.2 km for RS422/485. Measuring 33.4 x 61.0, converters support Windows, Linux, and Mac, and include...

Read More »
High-Speed Quad DAC enhances wireless base stations.
Electronic Converters

High-Speed Quad DAC enhances wireless base stations.

Featuring 1 GSPS data rate, AD9148 supports multi-antenna wireless communications standards requiring bandwidths demanded by digital pre-distortion transmit systems. Supplied in 12 x 12 mm package, this 4-channel, 16-bit DAC features on-chip 32-bit numerically controlled oscillator; 2X, 4X, and 8X interpolation; and dual-port, time-interleaved LVDS interface with single port or byte-mode support....

Read More »
'Made-in-the-USA' Fiber Optic Line Delivers Cost-Effective Performance
Electronic Converters

'Made-in-the-USA' Fiber Optic Line Delivers Cost-Effective Performance

Danbury, CT. April 21, 2010, ComNet, Communication Networks of Danbury, Connecticut, a leading manufacturer of fiber optic transmission and networking equipment, is introducing the ValueLine to satisfy the demand for a cost-effective line of fiber optic and Ethernet transmission products. The line consists of digitally encoded fiber optic video multiplexers, serial data products, Ethernet media...

Read More »
Protocol Converter transmits Jumbo Frames.
Electronic Converters

Protocol Converter transmits Jumbo Frames.

Compliant with IEEE802.3, IEEE802.3u, and IEEE802.1Q standards, Model RB-4G converts 1-4 E1 channels to 10/100 Base-T Ethernet and performs Ethernet switching with VLAN capability. Unit is E1 fault-tolerant and operates in both full and half duplex modes. Extending bandwidth up to 7.68 Mbps, device can automatically inspect E1 channel without interrupting data transmission. It is commonly used to...

Read More »
Interpolating DAC offers 16-bit, 800 MS/sec operation.
Electronic Converters

Interpolating DAC offers 16-bit, 800 MS/sec operation.

Model DAC3283, in 7 x 7 mm QFN package, provides 75 dBc third-order intermodulation distortion at 200 MHz. Spectral performance is improved with single-carrier WCDMA adjacent channel leakage ratio of 81 dBc for 153 MHz IF. Unit also offers selectable 2x/4x interpolator filters and I/Q phase and offset correction, which optimizes performance when driving quadrature modulators in 3G, 4G, and...

Read More »
Downconverting Mixer suits LTE/WiMAX/MMDS base stations.
Electronic Converters

Downconverting Mixer suits LTE/WiMAX/MMDS base stations.

Model MAX19998, 2,300-4,000 MHz SiGe downconverting mixer features downconversion channel with 24.3 dBm of IIP3, 8.7 dB of conversion gain, and 9.7 dB noise figure. Unit has 2RF-2LO spurious rejection of 67 dBc for RF level of -10 dBm, and 62 dBc for level of -5 dBm. High- and low-side LO injection architectures for 3.1-3.9 GHz LTE and WiMAX(TM) base stations are supported, as well as 2.3-2.9 GHz...

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics