Electronic Converters

Electronic Converters

High-Resolution ULP SAR ADCs consume 5.5 mW at 1 MSPS.

Available in 10-pin, 3 x 4.9 mm MSOP and 3 x 3 mm QFN package options, single-channel ADC8881 series includes 18- and 16-bit SAR (successive approximation register) ADCs with speed options from 100 kSPS to 1 MSPS. Input common-mode range simplifies signal conditioning andÂ- helps digitize difference between 2 independent sensor signals with widely varying common-mode voltage...

Read More »
Electronic Converters

Current to Voltage Converter is ready for analog ASIC integration.

Using Transimpendance Amplifier architecture with 8 digitally programmable current ranges from 8 -µA to 1 mA, SCi310 Analog Front End IP block converts current captured from sensor system to fully differential output voltage that is ready to be amplified. Precision I/V converter block maintains constant voltage at input pin for all operating modes and input currents while enhancing linearity and...

Read More »
Electronic Converters

Current to Voltage Converter is ready for analog ASIC integration.

Using Transimpendance Amplifier architecture with 8 digitally programmable current ranges from 8 Â-µA to 1 mA, SCi310 Analog Front End IP block converts current captured from sensor system to fully differential output voltage that is ready to be amplified. Precision I/V converter block maintains constant voltage at input pin for all operating modes and input currents while enhancing linearity...

Read More »
Electronic Converters

JESD204B-Compatible, 16-bit DAC runs at up to 2.5 GSPS.

Suited for multimode 2G/3G/4G cellular base stations,- 2.5 GSPS DAC38J84 (4-channel) supports JEDEC JESD204B serial interface standard for data converters up to 12.5 Gbps. Pin-compatible 16-bit DAC38J82 (2-channel) runs at 2.5 GSPS. Dual independent transmit paths of DAC38J84, which also integrates multi-band summation block, provide up to 1 GHz of complex information bandwidth each. DAC37J84...

Read More »
Bench Top Power Supplies provide frequency conversion.
Electronic Converters

Bench Top Power Supplies provide frequency conversion.

Variable or fixed voltage Sophisticated protection functions -±0.7% load regulation ±0.1% line regulation Powerstax, specialist provider of highly optimized power sources, now presents its customer base with the Behlman PF1350 and PF1351. Targeting mission-critical industrial and military powers system designs, these compact, power factor-corrected bench-top units differentiate themselves...

Read More »
Electronic Converters

JESD204B-Compatible, 16-bit DAC runs at up to 2.5 GSPS.

Suited for multimode 2G/3G/4G cellular base stations,Â- 2.5 GSPS DAC38J84 (4-channel) supports JEDEC JESD204B serial interface standard for data converters up to 12.5 Gbps. Pin-compatible 16-bit DAC38J82 (2-channel) runs at 2.5 GSPS. Dual independent transmit paths of DAC38J84, which also integrates multi-band summation block, provide up to 1 GHz of complex information bandwidth each....

Read More »
Electronic Converters

Signal Converter offers dimming control for 80 fixtures.

Extracting dimming levels and address information from incoming DALI data, Model DAP-04 controls each of 4 PWM dimming outputs individually. Each channel can drive PWM input of any MEAN WELL LED power supply equipped with 3-in-1 dimming function. Model DAP-04 offers 1–100% dimming range, and choice of linear or logarithmic dimming curves which comply with IEC62386-207. Built-in relay and...

Read More »
Electronic Converters

Signal Converter offers dimming control for 80 fixtures.

Extracting dimming levels and address information from incoming DALI data, Model DAP-04 controls each of 4 PWM dimming outputs individually. Each channel can drive PWM input of any MEAN WELL LED power supply equipped with 3-in-1 dimming function. Model DAP-04 offers 1–100% dimming range, and choice of linear or logarithmic dimming curves which comply with IEC62386-207. Built-in relay and...

Read More »
Electronic Converters

Discrete Serial Link Aggregator ICs support data rates to 10 Gbps.

Using 2 power rails, 1- to 8-channel TLK10081- and 2-channel TLK10022 aggregate and de-aggregate point-to-point serial data streams for transmission over backplanes, copper cables, and optical links. Features include intelligent serial link switching and built-in digital equalization. While TLK10022 supports 4:1, 3:1, and 2:1 bidirectional serial link configurations, TLK10081 manages 8:1...

Read More »
Electronic Converters

Discrete Serial Link Aggregator ICs support data rates to 10 Gbps.

Using 2 power rails, 1- to 8-channel TLK10081Â- and 2-channel TLK10022 aggregate and de-aggregate point-to-point serial data streams for transmission over backplanes, copper cables, and optical links. Features include intelligent serial link switching and built-in digital equalization. While TLK10022 supports 4:1, 3:1, and 2:1 bidirectional serial link configurations, TLK10081 manages...

Read More »

All Topics