Electronic Converters

Analog-to-Digital Converter has 28-pin flat package.
Electronic Converters

Analog-to-Digital Converter has 28-pin flat package.

Model 9042 12-Bit monolithic analog-to-digital converter microcircuit offers 100 krad (Si) total dose tolerance, and utilizes radiation-hardened RAD-PAK® packaging technology. Designed with wideband front end, it addresses needs of multichannel receivers. 9042 runs off of one 5V supply, provides CMOS-compatible digital outputs at 41 MSPS, and maintains 80 dB spurious-free dynamic range...

Read More »
Digital to Synchro Converters handle high temperatures.
Electronic Converters

Digital to Synchro Converters handle high temperatures.

Model DSPL60 requires 115V 60Hz reference input and +5 Vdc @ 20ma. Converters accept 14 bit natural binary angle and convert it into 3-wire synchro signal. Output is short circuit proof, and current limited with transient protection and thermal cutoff. Devices measure 2.6 x 3.1 x 0.51 in. and have thermally conductive encapsulant and metal top plate. Operating temperatures are 0-70 or -55 to 90...

Read More »
Electronic Converters

A/D Converters sample images at high speeds.

SPT7864 and SPT7866 10-bit CMOS analog-to-digital converters sample at 40 and 60 MSPS, respectively, making them suitable for CCD imaging, video digitizing, and medical imaging applications. Both have good linearity, including DLE of ±0.5 LSB and ILE of ±0.6 LSB at full sampling speed. They have built-in sleep mode with typical power dissipation of 55 mW, and both allow user to choose...

Read More »
Converters can provide up to 25 VA.
Electronic Converters

Converters can provide up to 25 VA.

High Power Digital to Synchro Converters feature 14, 12 or 10 bit resolution. They are designed to drive torque receivers with accuracies up to +/- 10 min of arc, while being immune to overload and transient conditions. Available output voltages are 90 or 11.8V RMS L-L, 60 or 400Hz. Units will accept 14-bit natural binary angle and convert it into 3-wire synchro or 4-wire resolver signals.

Read More »
An Introduction to Plastic Injection Molding
Sponsored

An Introduction to Plastic Injection Molding

We developed this eBook with designers, engineers and purchasing specialists in mind. It is written to provide a basic understanding of plastic injection molding presses, processes and costs. Our goal is to make our customers more knowledgeable about what goes into making a plastic part.

Read More »
PWM Converters are for mobile equipment and power generation.
Electronic Converters

PWM Converters are for mobile equipment and power generation.

PWM Converters provide compact solution for converting pulse width modulated (PWM) signal into analog current or voltage outputs for mobile equipment, industrial automation and power generation applications. Models are available to convert current inputs into PWM outputs. Converters operate from 24 Vdc and other supply voltages, have diagnostic LEDs, are confromally coated for rugged environments...

Read More »
Synchro to BCD Converter has 0.01 deg resolution.
Electronic Converters

Synchro to BCD Converter has 0.01 deg resolution.

Module converts synchro or resolver inputs of 11.8, 26 or 90V @ 400Hz or 90V @ 60Hz into five decade BCD data representing angle with accuracy of 0.050 or 0.030 deg. Converters have isolated synchro inputs and zero offset adjustment. Digital outputs are TTL/CMOS compatible. Frequency range is 47Hz to 1200Hz. Operating temperature ranges are 0 to +70°C and -55°C to 105°C. Unit...

Read More »
D/A Converter accommodates video and graphics.
Electronic Converters

D/A Converter accommodates video and graphics.

Image-quality FMS3818 triple 8-bit DAC has conversion rate of 180MHz, making it suitable for display applications, including video, computer graphics cards and workstations, plus systems with XGA, SXGA, and UXGA resolution. It has power-down control to conserve battery power in portable equipment, double-buffered digital inputs for low distortion, and an onboard bandgap voltage reference. DAC is...

Read More »
Interface Units provide alternative to A/D cards.
Electronic Converters

Interface Units provide alternative to A/D cards.

TWI-FO and TWN-FO convert analog signal into linear, frequency output signal, with 50:50 mark space ratio. They are designed to be used with PLC to convert 4-20mA signal into 10-10Hz frequency, allowing direct connection into digital input on PLC powered by PLC's 24Vdc power supply. TWI-FF and TWN-FF are designed as interfaces between Trimec DP490 Flow Transducer and PLC. Output is 50:50 mark...

Read More »
Electronic Converters

D/A Converter is designed for automatic test equipment.

SPT5420 octal 13-bit, parallel input, voltage output, digital-to-analog converter features settling time of 15 Â-µs with low power dissipation of 195 mW. Unit is available in 10 x 10 mm, 44-lead metric quad flat package with operating temperature range of 0 to 70° C. Applications include testers of memory, logic and mixed signal conditioners as well as instrumentation and process...

Read More »
Electronic Converters

12-Bit Serial Daisy-Chain DAC is radiation tolerant.

CMOS 8143RP features serial data input, buffered serial data output and greater than 50 krad (Si) total dose tolerance. Designed for multiple serial DAC systems, unit minimizes address decoding lines and allows 3-wire interface for various DACs; one data, one CLK and one load line. LOAD control inputs allow simultaneous output updating of multiple DACs and asynchronous CLEAR input resets DAC...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics