Electronic Converters

Fiber-Optic Converters isolate DeviceNet networks.
Electronic Converters

Fiber-Optic Converters isolate DeviceNet networks.

Modular, DIN-rail-mounted PSI-MOS-DNET system consists of fiber-optic converters that allow complete isolation of DeviceNet networks as well as full redundant operation of fiber communication lines and power supply. Immune to EMI, RFI, and transient surges, system allows use of base module for point-to-point configurations for line structures and extended bus drops. Offered with fiber-optic line...

Read More »
PCI A/D Board streams at 14-bit resolution.
Electronic Converters

PCI A/D Board streams at 14-bit resolution.

Model PCI-417N samples 32 analog input channels in parallel at rates to 80 KHz per channel. Product includes 32-bit wide, on-board, DMA PCI bus master and non-stop streaming design. Additional offerings include local A/D FIFO memory up to 256K samples, Windows® C++ DLL software, and LabVIEW® VI's plus ActiveX/OCX® controls. Full scale input voltage ranges of ±5 or...

Read More »
Programmable Converter reads 8 x 8 array of photodiodes.
Electronic Converters

Programmable Converter reads 8 x 8 array of photodiodes.

Model TCS230 programmable color light-to-frequency converter combines configurable silicon photodiodes and current-to-frequency converter on single monolithic CMOS integrated circuit. Output is square wave with frequency directly proportional to light intensity. Full-scale output frequency can be scaled by one of 3 preset values via 2 control input pins. Unit communicates directly with...

Read More »
Fiber-Optic Switch allows use of 2 separate ports.
Electronic Converters

Fiber-Optic Switch allows use of 2 separate ports.

QuickSwitch 4185 Fiber Optic Switch/Converter allows user to access 2 separate fiber-optic 100 Base FX ports from 100 Base TX Fast Ethernet port. Fiber optic/twisted pair copper conversion is built in and unit is compliant with 802.3u 100 Base TX/FX standard. Ports A and B are 1300 nm, SC Duplex, Multimode, 100 Base FX fiber optic ports. COMMON port is 100 Base TX Fast Ethernetport. Front-panel...

Read More »
Electronic Converters

Ethernet Blade converts copper link to fiber link.

INTELLAPATCH Switches with multi-rate Ethernet functionality enable cable management, failover, and security applications. Blade provides ability to convert incoming copper link to fiber link, and vice versa, and supports Ethernet, Fast Ethernet, and Gigabit Ethernet over copper simultaneously. INTELLAPATCH switches, outfitted with 10/100/1000 Ethernet blade, provide non-blocking, any-to-any...

Read More »
Converter offers 79 db SINAD and 91 dB SFDR.
Electronic Converters

Converter offers 79 db SINAD and 91 dB SFDR.

Model LTC1740 14-bit, 6 Msps analog-to-digital converter features flexible input range, which can be configured for full-scale span from ±1.25 to ±2.5 V. It operates with single 5 V supply or dual ±5V supplies. Integral non-linearity is 0.8 LSB and differential non-linearity is 0.5 LSB. Unit is offered in 36-pin SSOP package and is suitable for high-resolution imaging, spectral...

Read More »
DC/DC Converter is offered in SIP package.
Electronic Converters

DC/DC Converter is offered in SIP package.

Non-isolated NiQor® series, with on-board input and output filtering, eliminates need for I/O capacitors. Point-of-load converter series has 3.0-3.6 V input range and delivers up to 15 A of current at 2.5, 1.8, 1.5, 1.2, and 0.9 V. Unit measures 2.0 x 0.55 x 0.335 in. and can be configured in vertical or horizontal orientations. Module employs synchronous rectification to achieve...

Read More »
Interface/Monitor converts HART to Modbus RTU.
Electronic Converters

Interface/Monitor converts HART to Modbus RTU.

HIM Smart HART Loop Interface and Monitor is offered with HART-to-MODBUS option that converts digital signal from smart HART instrument to standard MODBUS RTU protocol output. HIM provides for redundant MODBUS communications link identical to primary link. Converter provides 4-20 mA analog output that may be mapped to any HART variable. Dual alarm trip outputs can be individually configured to...

Read More »
Electronic Converters

Connectivity/Access Products offer line protection/restoration.

GigE redundant twister® offers primary and back-up links between two network switches, routers, or bridges and automatic failover of less than 200 msec. Radiance R200 single-slot chassis has internal power supply and supports access line cards. Chassis stacking line card manages up to 126 ports with 1 IP address, auto-negotiates 10/100 connections, and has four RJ-45 interfaces. Delta Class...

Read More »
Digital-to-Synchro Converters are standard-bus compatible.
Electronic Converters

Digital-to-Synchro Converters are standard-bus compatible.

Series STB/DSC single-slot STD Bus converters accept natural binary information from 10-16 bit and convert it to 11.8 or 90 V synchro or resolver information from 50 Hz to 5 KHz. Data is addressable in 2-byte format over STD backplane. Outputs are short-circuit proof and current limited. Only 60 Hz units require external transformer. Operating temperature ranges are 0 to 70°C and -55 to...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics