Electronic Converters

DC/DC Converters offer low output noise to 5 mVpp.
Electronic Converters

DC/DC Converters offer low output noise to 5 mVpp.

Isolated, 15 W, DC/DC converters, offered in single- and dual-output models, incorporate 250 mV dropout linear regulators and control circuit that maintains min constant dropout voltage over line and load temperature and output adjust range. With efficiencies to 88%, units include 6-sided shielding, soft start, adjustable outputs, and short circuit and thermal protection. Also offered: 750...

Read More »
Evaluation Module can be used as development platform.
Electronic Converters

Evaluation Module can be used as development platform.

Enabling designers to evaluate TCS230 Programmable Color Light-to-Frequency Converters, TCS230EVM consists of lens module with white LED illuminator, Parallax Board of Education (BOE) module and programmed BASIC Stamp, and PC host software. BASIC Stamp provides interface between TCS230 output and PC serial port, while Windows software displays RGB output values from TCS230 and allows user to view...

Read More »
A to D Converter has overvoltage indicator.
Electronic Converters

A to D Converter has overvoltage indicator.

LTC1746 14-bit, 25 Msps, Analog to Digital Converter conserves power and digitizes high frequency signals. With 77.5 dB SNR and 99 dB SFDR, unit dissipates 390 mW for high-end medical imaging, portable instrumentation, and communications. LTC1745 is pin-compatible, 12-Bit, 25 Msps ADC with low noise of 72.5 dB SNR and 96 dB SFDR. Input range can span ±1 to ±1.6 V. Units come in 48-pin...

Read More »
Converter features automatic channel selection.
Electronic Converters

Converter features automatic channel selection.

Model LTC2436-1 No Latency Delta Sigma(TM) ADC offers two fully differential input channels and differential reference input. Low noise allows 16-bit performance with full-scale ranges from ±2.5 V down to ±50 mV without PGA. Operating from single 2.7-5.5V supply, unit consumes only 200uA of supply current. Full-scale input spans -0.5VREF to 0.5VREF where reference voltage can be...

Read More »
Communication Converters control 8+ devices from 1 USB Port.
Electronic Converters

Communication Converters control 8+ devices from 1 USB Port.

USBS 1000 and 2000 series serial communication converters enable communication with serial-port devices using RS-232/422/485/530 serial protocols. Working with systems that support V1.1 USB in hardware and OS, converters are powered from USB cable and are automatically configured by computer. USBS 1000 units support speeds of 461 kbps or less and buffers no larger than 16 bytes. USBS 2000...

Read More »
Electronic Converters

Data Adapter eliminates data failure.

OneSpace-to-CATIA V5 Data Adapter supports integration of OneSpace Designer and OneSpace Collaboration data into CATIA V5 format, and vice versa. It speeds up product development cycle because there is no need to convert data to standard format prior to translation between CATIA V5 and OneSpace. Adapter is supported on Windows NT 4.0 SP 4, Windows 2000, and Windows XP, as well as Sun Solaris 8,...

Read More »
USB-To-RS485 Converter provides high-speed operation.
Electronic Converters

USB-To-RS485 Converter provides high-speed operation.

Model USB-485Ui is based on single-chip FT232BM USB UART IC for transferring serial data over Universal Serial Bus using Virtual Comm Port or DLL software. Locking nuts on DB-9M end secure serial connections. With isolation guaranteed to 1 kV, USB-485Ui can isolate remote devices from PC controller. No external power is needed since power is drawn solely from USB port. Unit supports rates up to 1...

Read More »
Electronic Converters

Media Converter meets RFI emissions standards.

AutoTwister(TM) 2643 copper-to-fiber media converter meets requirements for immunity to RFI interference as defined by FCC and CISPR Class B standards. Suited for use in businesses and medical treatment centers located in residential zones as well as personal residences, media converter provides auto-negotiation of speed (10/100 Mbps) and duplex in Ethernet and Fast Ethernet environments. Unit...

Read More »
Switch/Converter may be controlled remotely.
Electronic Converters

Switch/Converter may be controlled remotely.

QuickSwitch Model 5191, 8-Way Fiber Optic Remotely Controlled Switch/Converter acts as signal source and prevents optical signal loss. Fiber optic-to-twisted pair conversion is built-in, and unit allows access to any one of eight fiber optic network ports from one computer. Product offers pushbutton switching and LED display for switch position and fiber link presence. Network ports are 1300 nm...

Read More »
In-Line Charge Converters offer TEDS capability.
Electronic Converters

In-Line Charge Converters offer TEDS capability.

Series T422 converts charge mode piezoelectric sensor signals into low-impedance voltage signals for operation with ICP® sensor signal conditioners or readout devices which have ICP® sensor input. TEDS interface chip enables identification, location, sensitivity, and other information relative to attached sensor to be stored. Devices allow use of extreme environment charge mode...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers