Electronic Converters

Serial-to-Ethernet Converter features 3DES data encryption.
Electronic Converters

Serial-to-Ethernet Converter features 3DES data encryption.

HelloDevice Pro Series manages RS232/422/485-based serial devices over network. It provides IP address filtering to protect unintentional data streams from being transmitted to serial device. Static key-based 3DES data encryption promises secure data communication. Series supports open network protocols such as TCP/IP, UDP, and PPPoE allowing serial devices to be accessed over DSL-based broadband...

Read More »
Serial-to-Ethernet Converter supports TCP/UDP based modes.
Electronic Converters

Serial-to-Ethernet Converter supports TCP/UDP based modes.

Wireless HelloDevice Super Series manages RS232/422/485 based serial devices over network with features such as PCMCIA interface, flexible host mode, security, and event handling. Units present modem interface to serial device in modem emulation mode, accept AT modem commands, and make raw RS-232/422/485 data travel across local LAN. They run embedded Linux OS and support SSLv2, SSLv3, and TLSv1...

Read More »
Electronic Converters

Video Converter is packaged for outdoor use.

Controlled via Web browser, Model 2412SYS video-over-IP streaming solution converts PAL or NTSC video into 802.11b stream using UDP or RTP Ethernet protocol. Built-in directional antenna ensures unit-to-unit outdoor range of up to 1 mile. System accepts input power from 10-36 Vdc and draws 6 W for one video channel. Bit rate from MPEG-2 codec can be reduced to as low as 500 kbits/s to minimize...

Read More »
Analog-to-Digital Converters offer noise-free resolution.
Electronic Converters

Analog-to-Digital Converters offer noise-free resolution.

Models ADS1255 and ADS1256 are 24-bit ADCs offering resolution up to 23 bits, data rates up to 30 kSPS, and ±0.0010% non-linearity. Both are comprised of 4th order, delta-sigma modulator followed by programmable digital filter. Model ADS1255 supports one differential or 2 single-ended inputs and has 2 general-purpose digital I/Os. Model ADS1256 supports 4 differential or 8 single-ended...

Read More »
A Guide to Quality Control of the SMT Process
Sponsored

A Guide to Quality Control of the SMT Process

The printed circuit board (PCB) manufacturing process begins with cutting-edge equipment capable of accurately picking and placing up to 40,000 components per hour. This innovative equipment keeps error rates extremely low, and those defects that do occur are quickly caught by sensitive laser and optical inspection equipment.

Read More »
Synchro to Digital Converter has DC velocity outputs.
Electronic Converters

Synchro to Digital Converter has DC velocity outputs.

Measuring 2.6 x 3.1 x 0.82 in., PCB-mount product converts synchro or resolver inputs of 11.8 or 90 V, 400 Hz or 90 V, 60 Hz into parallel binary outputs representing angle with accuracy of up to ±4 arc minutes. Series provides DC voltage output proportional to velocity in addition to 10, 12, or 14 bit digital output. There is no accuracy degradation over 0 to +70°C or -55 to...

Read More »
Synchro to BCD Converter offers resolution of .01degree.
Electronic Converters

Synchro to BCD Converter offers resolution of .01degree.

Measuring 2.6 x 3.1 x .82 in., PCB-mounted converter series converts Synchro or Resolver inputs of 11.8, 26, or 90 V, 400 Hz or 90 V 60 Hz into 5 decade BDC data representing angle with .05° or .03° accuracy. Product offers isolated Synchro inputs and zero offset adjustment. Digital outputs are TTL/CMOS compatible, and input data is accepted. Frequency range is 47-1,200 Hz. Operating...

Read More »
Electronic Converters

Analog-to-Digital Converters suit multi-detector experiments.

Model 4418Q integrates charge in pulse, and is optimum for direct connection to anode of photomultiplier tube. Model 4418V accommodates pulse-amplitude measurements on pulses from nuclear spectroscopy amplifier. Arrival times of events relative to common Start pulse can be digitized by Model 4418T. All three 12-bit ADCs feature 8 identical inputs with CAMAC and fast FERAbus readout.

Read More »
Electronic Converters

Analog-to-Digital Converter eliminates need for PGA.

Offered in 10-pin MSOP package, low noise (1.45 Â-µVRMS) LTC2433-1 offers 16-bit performance over reference range of 100 mV to 5 V. Its 100 mV reference resolves differential input signal of ±50 mV to 16-bits. Product performs transparent offset and FS calibration on every conversion to provide 20 µV offset error, 1.25 LSB FS error, 1.25 LSB integral non-linearity error, and...

Read More »
Video Scan Converter handles up to 1600 x 1200 pixel input.
Electronic Converters

Video Scan Converter handles up to 1600 x 1200 pixel input.

RGB/Videolink® 1690 transforms computer signals to broadcast standard video in real time for recording, broadcast, display, or transmission over video codecs. Unit offers NTSC/PAL composite video, S-Video, and component analog video outputs. Digital-signal processing circuitry eliminates interlace flicker in output image. Features include pan and zoom, underscan/overscan adjustment,...

Read More »
Analog-To-Digital Converter delivers 90 dB SNR.
Electronic Converters

Analog-To-Digital Converter delivers 90 dB SNR.

Model LTC1603 250 ksps, 16-bit ADC offers no missing codes over temperature. It features ±2.5 V input range, precision reference, and trimmed internal conversion clock. Unit accepts input signals between ±5 V and has flexible digital output supply pin that allows part to interface with 3 V logic. Specified for commercial and industrial temperature ranges, LTC1603 is available in...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers