Electronic Converters

Digital-to-Synchro Converters measure 2.6 x 3.1 x .51 in.
Electronic Converters

Digital-to-Synchro Converters measure 2.6 x 3.1 x .51 in.

Reference-powered Digital-to-Synchro Converters require +5 Vdc input power and have internal transformer isolated outputs. They accept 14-bit natural binary angle and convert it into 3-wire synchro signal. Output is short circuit proof, and current limited with transient protection and thermal cutoff. The 400 Hz units have 4.5 Va load capability, while 60 Hz units offer 2 Va capability. All...

Read More »
Analog-to-Digital Converter achieves 4 msps.
Electronic Converters

Analog-to-Digital Converter achieves 4 msps.

Model ADS7881 combines 12-bit resolution, 1 LSB linearity, -91 dB harmonic distortion, 71.5 dB signal-to-noise, and 95 mW power dissipation. It addresses high-speed data acquisition needs by providing specification with input signal frequency as high as 1.8 MHz. Suited for optical networking, imaging, and telecommunications, SAR-based unit integrates internal reference and reference buffer, and...

Read More »
Light-to-Voltage Converters come in 8-pin SOIC packages.
Electronic Converters

Light-to-Voltage Converters come in 8-pin SOIC packages.

Available in surface-mount packages that measure 1.8 mm high, TSL250, TSL251RD, TSL260, and TSL261RD each combines photodiode and transimpedance amplifier in one monolithic IC. With irradiance responsivity of 69 mV/Â-µW/cm², TSL250RD has an output rise time of 260 µsec, while TSL251RD has irradiance responsivity of 17 mV/µW/cm² and output rise time of 70...

Read More »
Electronic Converters

Digital-to-Analog Converters offer up to 16-bit resolution.

Series X79000 integrates single channel, 12-bit non-volatile DAC, voltage reference with selectable gain and level shift, configurable output buffer, and 64 Bytes of general purpose EEPROM into single chip. Initial-value DAC-register restores values during power up. Push-Pot control allows for incrementing or decrementing from initial DAC value in either one LSB or byte or word steps. Converters...

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
A/D Converters feature independent operation.
Electronic Converters

A/D Converters feature independent operation.

Offered in 40-pin, ceramic TDIP package, ADSD-1402 includes 2 A/Ds that can be triggered simultaneously or independently. Each input channel has sample-hold amplifier, 2 MHz 14-bit A/D, and its own timing and control circuits. To ensure channel-to-channel matching, A/Ds operate from one precision reference, and there are 2 sets of offset and gain adjustments. Product offers 79 dB signal-to-noise...

Read More »
Digital-to-Analog Converter suits communication systems.
Electronic Converters

Digital-to-Analog Converter suits communication systems.

Model DAC2932 dual, 12-bit, 40 MSPS converter features 29 mW power dissipation, 75 dB spurious-free dynamic range, 2.7-3.3 V single-supply operation, and integraton of four 12-bit voltage-output DACs for signal path control. Further optimization can be achieved by lowering output current with adjustable full-scale range of 0.5-2 mA. Power-down mode reduces power dissipation to only 25 Â-µW....

Read More »
Driver translates TIWAY to alternative protocols.
Electronic Converters

Driver translates TIWAY to alternative protocols.

TIWAY driver enables devices using TIWAY 1 protocol to interface with other devices and networks in plant that use other drivers such as DH+, Profibus, Modbus, or ControlNet. With driver and FieldServer Gateway, PLCs using TIWAY protocol can be integrated as part of plant network. Any information available through communications port can be translated into alternative protocol. TIWAY Gateway can...

Read More »
Electronic Converters

Serial-Ethernet Converter supports Dynamic DNS and PPPoE.

Linux-based HelloDevice SS100 employs 32-bit processor, embedded web server, and open Linux platform. It supports RS232/422/485 serial communication, allowing most asynchronous serial devices to be accessed over network via its DB9 serial port. Converter handles serial data transfer rates up to 230 kbps, supports TCP/UDP-based communication modes, and includes modem emulation mode, status...

Read More »
Resolver-to-Digital Converters suit space applications.
Electronic Converters

Resolver-to-Digital Converters suit space applications.

Series RDC-19229S-4XX Class K monolithic converters provide programmable 10, 12, 14, and 16-bit resolution, programmable bandwidth and tracking rates, +5 V only input power, and internal synthesized reference. Operating temperature is -55 to +125°C. Units come in 16 x 16 mm, 44-pin ceramic quad flat pack. Typical space applications include motor control, positioning, and reaction wheels.

Read More »
Electronic Converters

Converter connects legacy devices to home networking systems.

OnRAMP lets consumers network legacy audio and video devices such as PCs, A/V receivers, and DVD players to FireWire(TM)-enabled home electronics without upgrading existing equipment. Streaming audio can be transferred from network of FireWire devices to S/PDIF and analog audio connections. OnRAMP can send A/V entertainment and IP data via IEEE 1394b over standard CAT5 cabling. It supports...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers