Synchro to Digital Converters have no external components.
Measuring 1.12 x 2.12 x .4 in., transformer isolated converter modules mount on PCBs and track input rates up to 600 RPS with no added error. They convert Synchro or Resolver inputs 50 Hz to 5 KHz to 10-16 bit parallel binary output, representing angle with accuracy up to 2 arc min. No external transformers or components are required. Velocity and fault outputs are standard. Digital outputs are...
Read More »Media Converters offer stand-alone and chassis-based models.
Remotely-managed, RS-232 copper-to-fiber converters transmit full complement of RS-232 flow control/handshaking signals, while supporting full or half-duplex data transmission at speeds up to 128 kbps. Local or remote loopback on both copper and fiber optic cable allows for diagnostic testing prior to system turn-up. Read/write access allows for status information from remote locations, as well...
Read More »Stand-Alone Media Converters have rugged enclosures.
Just Convert-It line of converters enable copper to fiber conversion and are available in 4 models. J/E-CF-02 suits 10Base-T to 10Base-FL conversions, while J/FE-CF-03 suits 100Base-TX to 100Base-FX and features auto-negotiation and auto-cross. J/E-PSW-FX-02 10/100Base-T to 100Base-FX bridging media converter has ability to disable auto-negotiation feature, and J/RS232-xF-01 RS232 copper to fiber...
Read More »
Compact ADC suits industrial imaging applications.
Offered in 10-Pin MSOP package, LTC1403 consists of 14-bit, 2.8 Msps, serial Analog to Digital Converter (ADC) that offers AC and DC performance of 73.5 dB SINAD, ±4 LSB INL. Unit draws 5 mA when sampling at 4 Msps with 3 V supply; low power design and footprint allow use in instrumentation sensors or probes, minimizing analog transmission line errors. Features include 80 dB common mode...
Read More »
Design Guide: Heat Sinks for High-Power Applications
Without appropriate thermal management, electronic components will degrade over time, causing problems ranging from minor errors to critical failures.
Read More »
Data Converter adapts card access controls.
Version CVX-1200 MultiBender(TM) data converter for card access control systems can incorporate over 100 common reader interface formats in its on-board memory. It is equipped with pluggable connectors, field configurable interface and formats, low power consumption, low profile snap-in mounting, and future expansion for 255 formats. It suits applications where existing cards and readers are to...
Read More »
Analog Front End suits motor control applications.
Model ADS7869 integrates three 12-bit, 1 mega samples/sec analog-to-digital converters, including 7 sample-and-hold circuits and 12 fully differential input channels. Three differential inputs provide phase current measurement with each input connected to window comparator and sign comparator. For position sensor analysis, 4 sign comparators connected to 4 input channels and two 16-bit up/down...
Read More »
Analog-to-Digital Converters include serial LVDS interface.
Series ADS527x consists 40, 50, 65, and 70 MSPS converters in 12-bit resolution, and 40, 50, and 65 MSPS converters in 10-bit resolution. Signal-to-noise ratio is 70.5 dB for 12-bit models and 60.5 dB for 10-bit models. Eight-channel units consume 123 mW/channel at 65 MSPS. Operating from 3.3 V supply, devices feature peak-to-peak differential input range of 2 V. They are suited for ultrasound,...
Read More »
Protocol Converter provides CDIM and FOM compatibility.
Protocol Converter Multi-Channel Unit (CV-MCU) line combines features of Conditioned Di-Phase Modems and Fiber Optic Modems and offers conversion to and from Non-Return to Zero protocols. Each aluminum, 1U, rack-mount chassis handles 2 independent circuits configurable for separate applications with different fiber types. Each circuit can be upgraded independently, and circuit modules are...
Read More »Protocol Conversion Modules work with Quantum processors.
ProTalk Q in-chassis protocol conversion modules allow Quantum processors to communicate directly with foreign devices and networks via various protocols. Single slot solutions offer backplane compatibility with Quantum processors, built-in Ethernet port with support for 10/100 Mb Ethernet communications, and programming/status port (RS-232 only). Dual serial ports are application ports allowing...
Read More »
Converters offer simultaneous sampling at 3 MSPS.
Models LTC1407A and LTC1407 are 14-bit and 12-bit Analog-to-Digital Converters with 2 simultaneous sampling inputs. Ten-pin MSOP package allows design of compact high-speed data acquisition systems. Powered from single 3 V supply with power dissipation of 12 mW, Model LTC1407A achieves 73.5 dB SINAD and guarantees 14-bit no missing codes. When device is not converting, power dissipation can be...
Read More »
Precision Machining Solutions with Over 25 Years of Experience
Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.
Read More »
