Electronic Converters

Digital-to-Synchro Converters drive up to 5 Va.
Electronic Converters

Digital-to-Synchro Converters drive up to 5 Va.

With ±1 minute +1 LSB accuracy, Digital-to-Synchro Converters accept 16-bit natural binary angle and convert it into 3-wire synchro or 4-wire resolver signals. Utilizing hybrid power amplifiers, output voltages are 90 or 11.8 V rms L-L, 60 or 400 Hz. Output is short circuit protected, current limited, and transformer isolated, and digital inputs are TTL/DTL compatible. Operating...

Read More »
Bulkhead Media Converter is suited for harsh environments.
Electronic Converters

Bulkhead Media Converter is suited for harsh environments.

Housed completely within bulkhead connector, media converters handle optical-to-electrical as well as full physical layer conversion. Series consists of standard options, including Gigabit Ethernet and Fast Ethernet media conversion using RJ-45 interface connection. Other variations include Ethernet MII or GMII ribbon cable interfaces and 1x/2x Fiber channel transceivers. All versions feature...

Read More »
Strain Gage to PLC Converter includes 10 V excitation source.
Electronic Converters

Strain Gage to PLC Converter includes 10 V excitation source.

DIN-mount Model 8555 accepts 0-50 mV differential or single-ended signal and converts it to 0-5 kHz pulse compatible with PLC high-speed inputs. Output is an isolated floating optocoupler transistor, which provides dc isolation from input and dc power. It is linear to 0.01% with accuracy of better than 0.1%. Powered by 24 Vdc with max current draw of 45 mA, Model 8555 provides control system for...

Read More »
Quad-Channel Voltage/Current DAC can drive over 200 V.
Electronic Converters

Quad-Channel Voltage/Current DAC can drive over 200 V.

Using high-voltage silicon process, HVDAC 200 is based on 9-bit current DAC architecture and operates in current or voltage mode. Output range is controlled by reference input, and each channel includes 5-bit output offset adjustment and current limitation circuit. Overall output range is adjustable from 20-200 V, and communication is executed serially via SPI interface with signal retransmission...

Read More »
Electronic Converters

Industrial Media Converters are offered in 6 models.

JetCon 2401 RS-422/485-to-multi mode fiber converter transmits over distances to 2 or 30 km. JetCon 2301 Industrial Ethernet-to-Fiber Rail-Converter transmits up to 2 or 50 km. JetCon 2101 and 2101i are industrial RS-232-to-RS422/485 Rail-Converters. Latter is designed with optical isolation. If transmission is longer than 1.2 km, isolated JetCon 2101ir is suited for repeating connecting...

Read More »
Serial-to-Ethernet Kit eliminates designing from scratch.
Electronic Converters

Serial-to-Ethernet Kit eliminates designing from scratch.

Multi-Port Serial-to-Ethernet Kit allows multiple ports to convert data from serial to Ethernet. It also enables bi-directional conversion from Serial-to-Ethernet and Ethernet-to-Serial. Kit provides hardware and software necessary for sensors and other serial devices to communicate via LAN or other network. Implementation of optional RabbitWeb software module lets user web-enable applications to...

Read More »
Sampling ADCs feature noise levels to 150 µVrms.
Electronic Converters

Sampling ADCs feature noise levels to 150 µVrms.

Analog-signal-processing (ASP), multi-chip ADSD-1410 uses active laser trimming of thin-film resistors, weaving different semiconductor chips into one ASP function. It has 2 input channels, wideband (30 MHz) sample-hold amplifiers, and independently clocked, 14-bit, 10 MSPS ADCs. Housed in 28-pin, double-DIP, ceramic package, unit employs proprietary gate array that provides timing and control...

Read More »
Modules offer sixteen 16 bit D/A converters per board.
Electronic Converters

Modules offer sixteen 16 bit D/A converters per board.

IP231 Industry Pack mezzanine module allows simultaneous D/A conversion across all channels, which enables unit to write sixteen 110 V outputs in 135 seconds for high-speed processing. Users can populate VME, PCI, or CompactPCI mezzanine carrier card with up to 5 IP231 modules for high-density single-slot solution. Optional versions offer extended temperature ratings for harsh environments.

Read More »
Analog-to-Digital Converter offers 4 kHz multiplexing rate.
Electronic Converters

Analog-to-Digital Converter offers 4 kHz multiplexing rate.

With variable speed/resolution, 24-bit Delta Sigma Model LTC2447 features multiplexing architecture to digitize multiple ratiometric sensors. Four differential inputs, coupled with 4 differential reference inputs, allow ratiometric measurements of multiple RTDs, bridges, and pressure sensors. Fifth differential reference can be shared by any or all inputs. For low output rate applications, ADC...

Read More »
Analog-to-Digital Converter features 50 kHz bandwidth.
Electronic Converters

Analog-to-Digital Converter features 50 kHz bandwidth.

Model ADS1271 offers 1.8 Â-µV/C offset drift with low in-band noise of 6.5 µV rms. Onboard linear phase decimation filter suppresses modular and signal out-of-band noise, providing signal pass-band of 90% of Nyquist rate with less than 0.005 db ripple. With 3 selectable operating modes, 24-bit unit offers 105 kSPS data rate, 109 dB SNR resolution, and power dissipation of 35 mW....

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers