New Electronic Components & Devices Products

Server Rack Enclosure holds up to 2,000 lb static load.

Suited for all rack-mounted server and storage products, HP v142 enclosure is 19 in. server rack with front door that is 63% perforated for efficient airflow and cooling. Product has front/rear door handles for security, side panels to ease mounting, welded frame, and is compatible with variety of cable management accessories. Enclosure also has zero-U mounting areas to maximize space for servers...

Voltage Controlled Oscillator operates in 2,580-2,650 MHz range.

Packaged in 0.5 x 0.5 in. SMD package, CVCO55CC-2580-2650 features typical phase noise of -110 dBc/Hz at 10 kHz offset, and has control voltage range from 0.5-4.5 V. Unit accepts input voltage of 5 V and consumes max. current of 40 mA. Pulling and pushing are minimized to 1.5 MHz and 1.5 MHz/V, respectively, while second harmonic suppression is -15 dBc typical and output power is typically +3...

Ruggedized Lithium Coin Cell Holders have low-profile design.

Low Profile Lithium Coin Cell Holders securely retain No. 2450 Lithium Coin Cells under shock and vibration conditions in high-density PCB applications. Featuring dual-spring contacts, polarized products may be used with most vacuum and mechanical pick-and-place assemblies. Parts are manufactured with .008 in. thick phosphor bronze and gold plate over glass-filled LCP base, rated UL 94V-0.

Ethernet PROFIBUS-® Device Coupler helps monitor networks.

Combining web server software with diagnostic functionality, Model PB-XEPI enables users to monitor PROFIBUS networks remotely through web browser, without disrupting network operations. Coupler can identify malfunctions in network and send error message via e-mail that includes link to device. Users can then view detailed information about malfunction and recommended procedures to fix it. Using...

Next-Gen Nanoparticle Arc Shields

This white paper provides an overview into integrating nanoparticles into Paulson face shields.

Hall-Effect Sensor Interface offers analog and digital outputs.

Available in 3 x 5 mm, 10-pin Ã-µMAXÃ-® package, dual 2-wire Model MAX9621 enables microprocessor to monitor status of Hall-effect sensors either through analog output by mirroring sensor current for linear information or through filtered digital output. Device protects sensors from supply transients up to 60 V and short-to-ground conditions. Operating from 5.5-18 V supply, MAX9621...

LED Flash Driver optimizes picture and video quality.

Driving up to 1,000 mA, Model AS3645 can be used in single or double LED flash environments. High-side current source works with up to 2 x 500 mA with LEDs in serial configuration, and up to 720 mA with 1 LED. Inductive device auto detects whether to employ single or dual LED mode, and enables direct one-button flashlight mode. Equipped with 2 MHz fixed frequency DC-DC boost converter with soft...

Monolithic Digital-to-Analog Converter optimizes MRI systems.

Offering 1 ppm resolution and accuracy, 20-bit Model AD5791, when used in MRI systems, optimizes image quality and enables precise control of magnetic gradient. Device features low noise of sub 1 ppm, refresh rate of 1 Ã-µs, and output drift of sub 1 ppm, maximizing operational up-time by eliminating need to take MRI system offline for calibration cycles. Able to be configured for unipolar or...

Plastic Transistor Packages replace ceramic in RF applications.

Intended high-frequency, high-power applications, STAC plastic air-cavity packages feature junction-to-case thermal resistance (RTH) of 0.28Ã-

SMT LED is developed specifically for vehicle headlights.

Suited for daytime running light applications based on use of light guides, OSTAR Compact LED achieves typical brightness of 300 lm with power draw of 5 W and operating current of 1.4 A. High luminance enables light guide systems to be produced with just 2 LEDs. Measuring 2 mmÃ-², surface mount LED chip offers heat removal rate of 6 K/W, making it suitable for high-temperature zones at front...

Welding Helmet Coolers remove stagnant air, decrease lens fog.

Designed to fit most Miller Arc Armor Helmets, CoolBand(TM) reduces under hood temperature by up to 8Ã-

Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale

Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.