SPST Sealed Contactor measures 3 in. tall and weighs 1.9 lb.
Designed for large all-electric or hybrid-powered vehicles, busses, emergency vehicles, mining equipment, and rail, EPICÃ-® GX16 is rated from 20-600 A for continuous duty and can switch both DC and AC voltages up to 750 V. Due to its dual coil design, unit requires only 8 W of coil power for continuous operation. Able to mount in any position, RoHS compliant contactor can be used in harsh...
Read More »
Rugged Circular Connectors suit military applications.
Fischer UltiMate(TM) Military Connectors Line features miniature, ultralight design and resist shock, vibration, and corrosion. Sealed to IP68/69K, series includes shielding, which meets IEC norm 60512-23-3 standard; four mechanical codings that allow mating even in dark; and plug, which is available in 2 body sizes with push-pull locking or emergency release system. Product line is manufactured...
Read More »
Instrumentation Amplifier includes on-chip diagnostics.
By allowing users to detect shorts, open circuits, and degraded source connections in remote industrial applications, Model LMP8358 facilitates pressure and thermocouple bridge measurements. Zero-drift, programmable amplifier operates from single 2.7-5 V supply, providing 10 Ã-µV max offset voltage and 50 nV/C max offset voltage drift. Supplied in 14-pin SOIC and TSSOP packages, amplifier...
Read More »PHY and MAC Card supports LTE or WiMAX applications.
Providing complete Digital Base Band design, Model AMC-2C87W3 includes L1 PHY, L2 RLC/MAC, S1/X2 interface, and security processing. WinPath3 Network Processor from Wintegra supports symmetrical multi-processing with 12 DataPath cores and 64 parallel hardware threads, while 2 TI TCI6487 multi-core DSPs running at 1.2 GHz deliver power required for single sector 10 MHz, 2x2 MIMO LTE system. Xilinx...
Read More »
Design Guide: Heat Sinks for High-Power Applications
Without appropriate thermal management, electronic components will degrade over time, causing problems ranging from minor errors to critical failures.
Read More »AMC Processor Module features front panel SRIO interface.
Suitable for test equipment and general purpose DSP applications, Model AMC-3D74 includes multiple 10 Gbps Serial RapidIO interfaces for radio cards and any customer-specific I/O requirements. SRIO interfaces are also accessible via AdvancedMC backplane, and optical I/O can be provided as option. Single width, full-size PICMG AMC module is based around three TMS320C6474 multicore DSPs from TI,...
Read More »
I/O Board supports variable DAQ rates on analog inputs.
Model 1018 - PhidgetInterfaceKit 8/8/8 allows sampling speed to be set at 1, 2, 4, 8, and multiples of 8 msec, up to 1,000 msec, for each analog input on board. Update rate is 1,000 samples/sec maximum for 4 channels and 500 samples/sec maximum for all 8 channels. On digital inputs and outputs, update rate is 125 samples/sec. Board includes 5 V terminal block and also allows users to program...
Read More »
Self-Clinching Micro Pins suit compact electronic assemblies.
Available with dia of 1 mm and in lengths down to 2 mm, PEM Type MPP(TM) micro pins can be installed permanently into stainless steel or other sheet materials as thin as 5 mm with hardness up to HRB 92 on Rockwell B scale or up to HB 195 on Brinell. RoHS-compliant, corrosion resistant pins are made of precipitation-hardened stainless steel. Chamfered end allows for simple mating-hole alignment...
Read More »
Fixed Frequency Synthesizer features low phase noise.
Operating at 1,770 MHz, Model SFS1770A-LF features typical phase noise of -95 dBc/Hz at 10 kHz offset and typical sideband spurs of -70 dBc. Unit delivers output power of 6 dBm with VCO supply of 5 Vdc while drawing 35 mA, and phase locked loop voltage of 3 Vdc while drawing 9 mA over temperature range of -40 to 85Ã-
Read More »
Fixed Frequency Synthesizer operates at 2,030 MHz.
Suited for fixed wireless and microwave radio applications, Model SFS2030A-LF features typical phase noise of -95 dBc/Hz at 10 kHz offset and typical sideband spurs of -70 dBc. Unit delivers output power of 6 dBm with VCO supply of 5 Vdc while drawing 35 mA, and phase locked loop voltage of 3 Vdc while drawing 9 mA over temperature range of -40 to 85Ã-
Read More »Thermal Fluid/Hot Oil Filtration System promotes plant efficiency.
Able to integrate within any new or existing facility, Vector Series Model VB10C continuously filters contaminants on side stream basis down to 10 microns. This keeps fluids clean for higher heat transfer and plant efficiency, longer fluid life, and minimal maintenance downtime. Able to withstand 150 psig max pressure and temperatures to 650Ã-
Read More »
SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection
Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.
Read More »
