Electronic Components & Devices

Normally-Off 100V GaN Transistors come in low-inductance package.

Respectively, normally off 100 V GaN transistors GS61002P, GS61004P, GS61006P, and GS61008P are 20 A/21 mΩ, 40 A/11 mΩ, 60 A/8 mΩ, and 80 A/5 mΩ parts. Half bridge device, GS71008P (80 A/5 mΩ), is also available. Enhancement mode parts feature- reverse current capability, source-sense for optimal high speed design, and minimal Total Gate Charge and Reverse Recovery Charge....

Read More »
N-Channel Power MOSFETs minimize losses.

N-Channel Power MOSFETs minimize losses.

Rated at 25 V and available with or without integrated Schottky diode, Series NTMFS4Hxxx and NTTFS4Hxxx MOSFETs are suited for server and telecom switching applications, high power density DC-DC converters, and to support synchronous rectification in point-of-load modules. RDSon performance of 0.7 mΩ and low input capacitance of 3780 pF ensure conduction, switching, and driver losses are...

Read More »
Digital-to-Analog Converter offers 14-bit at 2.5 GSa/sec.

Digital-to-Analog Converter offers 14-bit at 2.5 GSa/sec.

Supplied in FPGA Mezzanine Card format that conforms to VITA 57 specifications, Model FMC223 features TRIG Out, CLK In, and Analog Out, along with Multi-IO LVDS connector and status LEDs on front panel. Mezzanine offers 8, 16, 32, or 72 QAM for amplitude modulation, while- RF Phased Locked Loop synthesizer provides optimized linearity and band flatness performance.

Read More »

Normally-Off 650 V GaN Transistors aid high-speed system design.

Normally-off 650 V GaN transistors GS66502P, GS66504P, GS66506P, and GS66508P are, respectively, 8.5 A/165 mΩ, 17 A/82 mΩ, 25 A/55 mΩ, and 34 A/41 mΩ parts. Also available, GS43106L is 30 A/60 mΩ cascode. Reverse current capability, zero reverse recovery charge, and source-sense optimize high-speed design. These RoHS-compliant devices come in near chipscale, embedded GaNPX package that...

Read More »
AC Input LED Drivers are offered in low-power versions.

AC Input LED Drivers are offered in low-power versions.

Eliminating flicker while promoting efficiency, DLE25- and 35 series come in IP67-rated, 3.68 x 2.89 x 1.29 in. enclosure and incorporate universal input with active PFC in 2 power stage design. Drivers, designed as class II isolation product without need for safety earth, are also approved as class 2 limited power source. Dimmable constant current versions are available with facility for PWM,...

Read More »
ISC Offers Custom BNC with PCB Overmolding

ISC Offers Custom BNC with PCB Overmolding

ISC is proud to announce our capabilities in the field of custom BNC with PCB assemblies. A BNC connector is primarily used for coaxial cables for fast and easy connect/disconnect situations. The root name is Bayonet Neill-Concelman which refers to the bayonet mount mating system where the coupling nut is rotated to fully achieve the mating cycle. The BNC family of connectors was established as a...

Read More »

Yakima Herald-Republic Reports Improved Performance of Virtualized Environment after Implementing Zebi Array

Tegile helps newspaper group overcome slowdowns caused by maxed-out NetApp appliance Newark, Calif.- – Tegile Systems, the leading provider of flash-driven storage arrays for virtualized server and virtual desktop environments, today announced that The Yakima Herald-Republic has chosen a Tegile Zebi array to address virtual machine performance issues during peak usage hours. The Yakima...

Read More »

Transphorm Expands Distribution Channels: Products are Now Available in Europe through HY-LINE Power Components

European distributor will now offer Transphorm 600 Volt GaN HEMT devices GOLETA, Calif., – Transphorm Inc. today announced that it has completed a distribution agreement with HY-LINE Power Components GmbH to stock and distribute its family of 600 Volt GaN high electron mobility transistors (HEMTs) in Central Europe. HY-Line's technical expertise will support the growing demand for...

Read More »

Angacom 2014: Sagemcom Showcases 4K UHD with 60 FPS

Sagemcom will showcase its latest set-top box innovation - including 4K UHD 60 FPS (frames per second) video, on its booth (hall 10.1 stand p41) RUEIL-MALMAISON, France - Sagemcom 4K UHD set-top boxes also include advanced features such as picture in picture, time shifting, record... Thanks to integrated performing Wi-Fi, the Sagemcom set-top box will allow operators to deliver a superior...

Read More »
P3 Communications Eliminates RF Interference in LTE/4G Mobile Networks with Rohde & Schwarz Equipment

P3 Communications Eliminates RF Interference in LTE/4G Mobile Networks with Rohde & Schwarz Equipment

Utilizing the RS PR100, P3 Communications locates and mitigates RF interference that negatively impact 4G/LTE network performance COLUMBIA, Md.- — P3 Communications, a worldwide technical engineering, testing and consulting services company for the telecommunications industry, has selected the R&S PR100 portable receiver from Rohde & Schwarz as their instrument of choice for identifying and...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics