New: Buy Now on Thomas and Pay Over Time with Credit Key   Learn More

Electronic Components & Devices

Photodiode offers 5 mm² active area in quadrant configuration.

Photodiode offers 5 mm² active area in quadrant configuration.

Resistant to radiation damage from UV lasers, SXUVPS4 multi-element detector can withstand 4 days of exposure to 10 eV 1016 photons/cm-² without degradation in responsivity. Photodiodes, supplied in TO-5 package that facilitates integration into new or existing systems, provide 0.125–0.02 A/W over 10–200 nm wavelength range. Circular detection surface is optimized for precise alignment of...

Read More »
Communication Modules suit IoT and embedded applications.

Communication Modules suit IoT and embedded applications.

Both using mPCIe interface, Model EMPL-G201 adds 1 or 2 isolated- Gigabit Ethernet ports, while Model EMP2-X401 adds either 4 or 8 serial ports independently selectable by software to communicate in RS232, RS422, or RS485 mode. Both Embedded Peripheral Modules include ESD surge protection that can handle electrostatic shocks up to 15 KV. Modules allow system designers to expand Ethernet or...

Read More »
Controller and I/O Modules operate in harsh environments.

Controller and I/O Modules operate in harsh environments.

Comprising controller and I/O modules, X20c series is constructed to handle all environmental conditions. Coating on electronics module protects components and circuit board from effects of condensation and corrosive gases with effectiveness checked- against BMW GS 95011-4 and EN 60068-2-6 test method 4. Functionally compatible with existing models, series operates from -25 to +60-

Read More »
LED Lightbars can be used in damp/food processing environments.

LED Lightbars can be used in damp/food processing environments.

Designed- to replace CFL and halogen fixtures, Plug-and-Play LED Lightbars are damp-listed for use in indoor areas subject to condensation,- certified- by NSF, and suited for food/beverage processing environments. ETL-listed connection box allows hardwired connection to lightbar system, while profile- lets wiring connection be located in- various locations. Low-profile distribution hub with...

Read More »

Communication Modules expand connectivity for embedded systems.

Via mPCIe interface, EMPL-G201 adds 1 or 2 isolated GigE ports to any embedded system. Daughter board with cable offers 2 RJ45 Ethernet jacks. Also available, multi-port serial module EMP2-X401 adds 4 or 8 serial ports, independently selectable by software, to communicate in either RS232, RS422, or RS485 mode. Flexible cable connects module with up to 8 daughter boards with DB9 serial port and...

Read More »

Perle Releases Multimode Single Strand (WDM) Fiber Media Converters

Perle Systems, a global manufacturer of advanced Ethernet over Fiber and secure device networking solutions, adds 44 models of Multimode Single Strand Fiber Media Converter to its Media Converter product portfolio. Also referred to as Bi-Directional ( BiDi ) or Simplex , these WDM Media Converters enable customers to extend copper RJ45 Ethernet connections across a single strand multimode fiber...

Read More »

Oticon Standardizes on Synopsys' Design Compiler Graphical

Reduced Congestion and MCMM Synthesis Cut Weeks from Schedule MOUNTAIN VIEW, Calif. Highlights: • Oticon has widely deployed Design Compiler Graphical for implementation of its hearing solutions ICs • Multi-corner multi-mode (MCMM) synthesis results in lower leakage and faster convergence • Congestion reduction in Design Compiler Graphical enables Oticon to achieve faster design performance...

Read More »

LED Packaging is custom tailored to requirements.

Designed to specific customer requirements, LED Substrates and Submounts- utilize variety of metallization technologies on alumina, AIN, and BeO ceramics, including PCTF-® Plated Copper on Thick and Thin Film with 20–75 -µm copper, AgENIG-® Electroless Nickel and Immersion Gold over Silver, and DBC Direct Bond Copper with 125–250 -µm copper. LED substrates for bond-pad down devices allow...

Read More »
Flat Top Emitters are available in custom wavelengths.

Flat Top Emitters are available in custom wavelengths.

Suited for short haul fiber optic and sensing applications that require precision alignment and maximum coupling efficiency, N3 series includes 5 ultra-red components at different wavelengths. Model MTE6066N3-UR has- dominant wavelength of 660 nm with- typ power output of 5.0 mW @ 20 mA, and other emitters are available in custom chips ranging from Vis to IR. In fiber optic communication...

Read More »
Miniature Rugged Connectors include pin socket version.

Miniature Rugged Connectors include pin socket version.

MiniMax™ Series, affording flexibility where space and weight restrictions are considerations, includes pin socket version. While 24-pin configuration is available with 4 power and 20 signal contacts, 19-pin configuration features 4 power and 15 signal contacts. Pin socket version is available as standalone connector, able to be mounted on flex or cabled by users, or as complete pre-cabled...

Read More »
3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership
Sponsored

3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership

At 3Sixty Mission Critical, we specialize in maintaining the performance and uptime of our customer's mission-critical applications. Our services are comprehensive and designed to take on the entire burden of maintenance. Our "UPS as a service" is just another example of how we develop out of the box solutions to help our customers operate more efficiently; see our video to earn more.

Read More »

All Topics