New Electronic Components & Devices Products

BGA Socket connects all pins with 10 GHz bandwidth.

DesignedÃ- forÃ- 1 mm pitch 1521 ball BGA, SG-BGA-8030 operates at bandwidths up to 10 GHz with less than 1 dB insertion loss. Contact resistance is 20 mΩ per I/O (typ). Mounted using supplied hardware on target PCB without anyÃ- soldering, product incorporatesÃ- heat sink andÃ- fan to dissipate 60 W. Integrated compression mechanism to socket lid facilitates BGA change, and...

Dual Channel PC/104 CAN Module provides 1,000 V isolation.

Available with Windows and Linux drivers, Model PCM-CAN-2-ISO employs high-speed isolated data couplers and power supplies to provide 1,000 V protection betweenÃ- two NXP SJA1000 CAN controllers and network interface. Each CAN channel can provide isolated +5 Vdc power or receive isolated +5 to +12 Vdc power from interface for additional flexibility. Operating from -40 to +85Ã-

MLO Diplexers support several wireless standards.

Based on multilayer organic high-density interconnect technology, 0805 MLO™ Diplexers support WCDMA, CDMA, WLAN, and GSM standards. Units feature max power capacity of 4.5 W andÃ- temperature range of -40 to +85Ã-

FPGA Evaluation Kit enables small form factor designs.

Equipped with All Programmable Artix-7 200T device,Ã- Artix™-7 FPGA AC701 Evaluation Kit has IP and reference design toolsÃ- needed to accelerate design cycle. Artix-7 FPGA, featuring analog mixed signal, DDR3, DSP resources, parallel and serial I/O, provides optimal performance for low-end remote radio head, mobile backhaul, software defined radio, and motor control...

Importance of Motor & Generator Maintenance & Repair in the Mining Industry

Electric motors and generators are essential components for mining industry equipment and the Battery Electric Vehicle (BEV) market. These sectors rely upon this equipment heavily to meet high production demands in rugged environments, and so they require careful design, construction, and maintenance to provide longevity and durability. Pumps, hoists, crushers, muckers, haulers, and mills are only some examples of mining and milling equipment utilizing electric motors.

Two-Channel LED Drivers are suited for use with high-CRI lamps.

Providing color control for 2-color LED light engines, MSL2021/23/24 two-channel SSL LED drivers can be accompanied with Atmel AVRÃ-® MCU or ARMÃ-® processor-based MCU. Each model drives one dominant LED string withÃ- linear controller and one color LED string withÃ- low-side buck controller to achieve target CCT coordinate and replicate color spectrum to attainÃ- high CRI...

Multichip Emitters deliver over 50 lm per square millimeter.

Designed for retail, architectural, and entertainment applications, LUXEON S illumination-grade emitters deliver light output up to 8,000 lm in narrow beams with sharp shadows. Luminaire designers can achieve beam angles in 8Ã-

LED Controller and Driver facilitate retrofit bulb design.

Offered in 6-pin TSOT package measuring 2.9 x 2.9 mm, Model TPS92075 is designed for phase-dimmable, offline AC/DC LED lamp and downlight applications such as E14, GU10, A19, and PAR20/30/38 bulbs. Constant-current lighting controller achieves power factor correction above 0.9 while delivering flicker-free dimming when used with conventional wall dimmers. Supplied in 10-pin PowerPad™ MSOP...

IC Coupler drives middle-capacity IGBT or power MOSFET.

Housed in SO6 package, Model TLP152 consists of GaAlAs infrared LED optically coupled to high-gain photodetector IC chip. Unit achieves low output current of 2.5 A and contributes to low-power consumption with operating power supply voltage of 10–30 V. With guaranteed minimum creepage and clearance distances of 5 mm and internal insulation thickness of 0.4 mm, Model TLP152Ã- is suited for...

TRIAC Dimmable LED Driver IC serves retrofit applications.

Flicker-Free™ IS31LT3935 solid state lighting (SSL) LED controller featuresÃ- dimming core based on AccuDim™ technology, which makes LED retrofit lamps have monotonic dimming profile across entire dimming range. With 100% compatibility with leading edge, trailing edge, and digital TRIAC dimmers, single-stage current mode LED controller comes in 3 x 3 mm DFN-10 package with exposed pad and...

AC/DC LED Driver IC targets general lighting applications.

With operating voltage from 85–265 Vac, PFC greater than 0.95, and current accuracy of Ã-

Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary

For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.