New Electronic Components & Devices Products

Tool-Free Terminations handle medium voltage cables.

Tested to IEEE 48-1996, RAYCHEM TFT-E elastomeric terminations are designed for 15, 25, and 35 kV cold shrink terminations and feature cold applied material technology. Elastomeric body promotes shelf life, cold temperature recovery, and UV stability. Stress control method employs metal oxide matrix technology, while pre-lubricated, crush resistant holdout facilitates installation. Offered in 3...

Portable Media Box offers sound for music, games, and video.

Utilizing stereo pair of OdysseyÃ-® transducers, JBL On Tour Black(TM) provides 6 W of total power and is equipped with touch volume controls, integrated protective cover, and stand. Four standard AAA batteries provide more than 24 hr of operation at normal listening levels due to digital amplifier and advanced energy management system. Unit is slightly larger than eyeglass case and is suited...

Clock Multiplier offers hot-programmable operation.

Capable of in-system spread spectrum adjustment, CDCE906 lets designers hot-program its 3 PLL components in-circuit to generate 6 output clocks from single source for any frequency up to 167 MHz. PLL dividers provide low-jitter clock from 27 MHz crystal clock and feature zero ppm output clock error for most A/V frequencies. Along with 60 psec jitter, product offers programmable output slew-rate...

OEM Upgrade Kit optimizes vehicle audio systems.

Rockford FosgateÃ-® dealer option audio upgrade kit replaces factory front door speakers with 6Ã-½ in. triaxial speakers for crispness and clarity. Subwoofer enclosure, featuring 10 in. long-throw subwoofer and 150 W custom MOSFET amplifiers, is molded to fit contours of vehicle and can be removed to fold seats flat. Kit includes all necessary wiring harnesses, adapters, and templates for...

Next-Gen Nanoparticle Arc Shields

This white paper provides an overview into integrating nanoparticles into Paulson face shields.

Infrared Emitters offer up to 200 mW/sr radiant power.

Available in 870 and 940 nm wavelengths, HSDL-42xx Series Emitters are fabricated using aluminum gallium arsenide LED technology and are housed in 5 mm through-hole package. Iron lead frames dissipate power over wide range of currents. Models rated at 870 nm are suited for IR communications, whereas 940 nm units are typically used for remote-control applications.

Three-Phase Line Filters help keep out EMI noise.

Suited for 4-wire WYE applications with balanced and unbalanced 3-phase loads from 20-60 A, Corcom A Series provides common mode and differential mode suppression from 50 kHz to 30 MHz. Corcom ADT Series is available with common or differential mode coils for Delta applications from 63-200 A. For very noisy Delta applications, 6-50 A Series FCD attenuates conducted interference at low and high...

Pulse Modulators replace thyratrons and switch tubes.

Air-insulated and air- or water-cooled, 19 in. rack-mountable PowerMod(TM) HVPM Series delivers 30-20 MW of peak pulses at voltages from 1-30 kV with currents from 50 A to 1 kA. Operating on 110 Vac, 50-60 Hz, units feature less than 1 Ã-µs rise and fall times into resistive load, 1-100 Ã-µs nominal pulse width, and up to 30 kHz nominal pulse frequency. Modulators measure 19 x 30 x 24...

Node Blades feature 3.06 GHz processors.

Available with single or dual 64-bit Low Voltage IntelÃ-® Xeon(TM) Processors running at 3.06 GHz, Models ATC5231 and ATC5232 are designed for communication equipment based on AdvancedTCA open standards architecture. Model ATC5231 implements PICMGÃ-® 3.1 Ethernet fabric, while Model ATC5232 implements PICMGÃ-® 3.2 InifiniBand fabric to provide 10 Gb/s throughput. Both utilize...

Connector System features splash-proof design.

Available as dual-row product in 2 through 10 and 16 positions, Sealed Mini Universal MATE-N-LOK connector system employs positive, polarized keys with latching orientation to facilitate assembly. Wire-to-wire and wire-to-board connector system features ganged wire seals and brass contacts with pre-plated tin or duplex gold plating rated for 600 Vac/Vdc @ 9.5 A max. Cycle durability is rated at...

PCB Adapter offers protection from harsh environments.

HanÃ-® Q 7/0 PCB adaptor enables Han Q 7/0 inserts of Han Q series to be directly connected to PCBs. Used with inserts in combination with standard and EMC type housings size Han 3 A, hoods and housings provide protection in harsh industrial environments against water, dust, and electromagnetic influences. Using EMC hoods and housings with PCB adaptor and Han Q 7/0 inserts ensures...

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.