Electronic Components & Devices

Capacitors are designed for high voltage applications.

Capacitors are designed for high voltage applications.

MVDR Inductive Capacitors feature capacitance range of 500PF and 1000PF, with voltage range from 10 to 15 kV, and capacitance tolerance at ±10%(K). Self-healing and equipped with tinned copper-clad steel axial leads, MVDR types may be combined in parallel and/or series to achieve various capacitances and voltages. Construction features include internal multi-series connection windings with...

Read More »
Aluminum Electrolytic Capacitors are compact and snap into place.

Aluminum Electrolytic Capacitors are compact and snap into place.

Snap-in capacitors are manufactured with can-wall groove that supports top, which is added after insertion of capacitor element. Because cans are nearly full, units are more compact than previous models. Type 380LQ is rated for -40 to 85°C operation; Type 381LQ is rated for -40 to 105°C operation; and Type 380LQ has a voltage range from 160 to 450 Vdc in capacitance values from 82 to 3900 hF.

Read More »
Capacitors are for use in high power ac filtering.

Capacitors are for use in high power ac filtering.

Series 5MPA film capacitors are supplied with bolt-down terminations at voltage ratings of 530 Vac. Capacitance values to 10 -µF are supplied with brass bolt termination and values to 100 -µF are supplied with bridge and bolt construction. Units provide continuous operation to 85°C with current handling spectrums from 50 Hz line to 20 kHz sumperimposed feedback. Wrapped in flame-retardant...

Read More »

Three-Phase Filter works with input voltages up to 480 Vac.

RP300 power line filter meets all domestic and international EMC and safety and conductive requirements in packages that conform to industry standard footprints. It eliminates equipment and mains-borne EMI and is available in delta or Y configurations in standard 25 to 400 A versions, with custom versions available up to 800 A. Filters are CSA, UL and EN-approved for input voltages up to 480 Vac,...

Read More »
PCB Fabrication Notes Guide
Sponsored

PCB Fabrication Notes Guide

The overall purpose of your fabrication notes is to enhance Design for Manufacturability for optimal PCB fabrication and assembly while maintaining applicable industry standards and regulations.

Read More »
Jack provides cable strain relief.

Jack provides cable strain relief.

Xcelerator(TM) GX2 Jack features QuickLace(TM) termination process and universal wiring format. It includes white IDC tower for visual contrast and smoke-gray stuffer cap that provides positive snap-latch feel and strain relief when jack is installed.

Read More »
Bus Modules are designed to control solenoid valves.

Bus Modules are designed to control solenoid valves.

PVLB10 and PVLC10 Serial Bus Modules provide 16 output capability and are compatible with DeviceNet, Profibus-DP and Interbus-S protocols. They have 21.6 to 26.4 Vdc solenoid supply voltage and continuous duty working temperature rating of 32°F to 104°F. Modules are suitable for applications where there is a need to reduce wiring, or when sandwich regulation, flow controls or input connectivity...

Read More »
IDC Systems are available in various sizes.

IDC Systems are available in various sizes.

FFSD Series IDC system features contacts on 0.050 in. x 0.050 in. pitch and is available in double row designs. Assembly measures 0.200 in. tall and includes 4-finger Beryllium Copper contacts with 10 to 25 positons per row. Notch polarization is standard. TCMD Series system features contacts on 0.0787 in. x 0.0787 in. pitch with square Phosphor Bronze pins and 2 to 25 positions per row. TCSD...

Read More »
Propeller Mixers suit pressure and vacuum vessels.

Propeller Mixers suit pressure and vacuum vessels.

Portable or Fixed-Mount Propeller Mixers provide strong axial flow pumping characteristics via their impeller. Impeller shape and style allows impeller to be positioned as low as 1/2 or as high as 3 times impeller diameter from bottom for batch volume flexibility. Mixers can be angle-mounted off-center, and may be combined with scraped-surface action of anchor-style mixers to provide dual or...

Read More »
Precision Ground Insert has 3F geometry.

Precision Ground Insert has 3F geometry.

Precision ground insert with 3F geometry for stainless steels, aluminum, high-temperature alloys and steels features periphery ground edges for accurate profiling and indexability. Additional features include light hones and positive geometry. Radii are available for light depths of cut and producing small corner radii. PVD grades offer layer of lubricity for reduced coefficient of friction....

Read More »

All Topics