Electronic Components & Devices

Op Amps have boost voltage.
Electronic Amplifiers

Op Amps have boost voltage.

PA38 and PA39 high voltage MOSFET power operational amplifiers are constructed with surface mount components on thermally conductive but electrically isolated substrate. Metal substrate allows PA38 and PA39 to dissipate power up to 125 watts. Power supply voltages range from ±100 Volts (200V total) for PA38 to ±50 Volts (100V total) for PA39. Both have slew rates of 10 V/Â-µs,...

Read More »
Wire Connectors are designed for high temperatures.
Connectors

Wire Connectors are designed for high temperatures.

Hi-Temp Wire Connectors can be used in temperatures up to 150°C. Square-wire spring threads directly onto conductors for connections with no slips or misses. High-dielectric, thermoplastic shell shields against environmental extremes and is fire-retardant and heat resistant. It provides flash-over protection and prevents exposure of bare wire. Connectors are available in 4 sizes from #22 to...

Read More »
I/O Board is designed for harsh industrial environments.
Electronic Boards

I/O Board is designed for harsh industrial environments.

CP371 16-channel I/O board serves as building block in CompactPCI systems. It features 3U/4HP format, 12-bit resolution, and accuracy reading of 1 LSB @ -40° to 85° C. Channel connection can be either single ended or differential (3 pins per channel). Board has input voltage range of 0 to 5, 0 to 10, ±5V, ±10V; input current is 0-20mA and 4-20mA.

Read More »
Miniature Inductors are designed for surface mount uses.
Inductors

Miniature Inductors are designed for surface mount uses.

SMI-1 Series consists of 13 parts having inductance values ranging from 10.0 Â-µHy @ 1.00 amp to 220.0 µHy @ .42 amp. Tolerances for inductance values are 20% for 10.0 µHy to 47.0 µHy values and 10% for 56.0 µHy to 220.0 µHy values. With pads solder-masked to core, inductors can be IR or vapor phase soldered directly to printed circuit board. Inductors...

Read More »
Membrane Filter works on air and gases.
Filters

Membrane Filter works on air and gases.

Steridyne® 0.2 Â-µm PVDF hydrophobic filter is absolute-rated for sterile filtration of air and gases. It has broad chemical compatibility, and is suitable for filtration of pharmaceutical, biological, and aggressive process gases such as sterile tank venting, fermentation air, and compressed air and gases.

Read More »
FRL Units are constructed of stainless steel.
Pressure Regulators

FRL Units are constructed of stainless steel.

Prep-Air® II units include filters, coalescing filters, regulators, piggybacks and lubricators. They are available in 2 basic body sizes: 3/8 in. body with 1/2 in. ports and miniature 1/8 in. body with 1/4 in. ports, with either NPT or BSPP threads. Individual units can be piped together using stainless steel pipe nipples. All units meet NACE specifications.

Read More »
Bandstop Filter is for Ku-band.
Filters

Bandstop Filter is for Ku-band.

Model 14560 passes satellite downlink signal from 10.95-12.75 GHz with less than 0.1 dB insertion loss. Lightweight aluminum filter provides greater than 70 dB attenuation to unwanted uplink signal from 14.0-14.5 GHz. Return loss is greater than 20 dB across entire downlink spectrum. Military-grade plating permits electrical characteristics to be maintained over broad range of field operating and...

Read More »
RF Amplifier handles BCI testing environments.
Electronic Amplifiers

RF Amplifier handles BCI testing environments.

Model 100A400 has high load tolerance, making it suitable for harsh test environments encountered in bulk current injection testing in automotive industry, where VSWR can exceed 6.0:1. 100 watt, 100 kHz to 400 MHz amplifier is also suitable for laboratory applications requiring instant bandwidth, high gain and moderate power output, such as antenna and component testing, wattmeter testing, and as...

Read More »
Electronic Sockets

Test Sockets are designed for high temperatures.

DIP Test Sockets, for 350°C and 500°C applications, have high temperature ceramic body and high conductivity stainless steel contacts. Normally closed contacts provide twin beam wiping action. They are plated with 50Â-µ in. gold over 50µ in. nickel. Sockets accept .300 in. center to .600 in. center row-row devices, up to 28 positions with leads on .100 in. pitch. They are...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers