Electronic Components & Devices

ESD Suppressor also has EMI/RFI filtering.
Electronic Adapters

ESD Suppressor also has EMI/RFI filtering.

SPUSB1 provides upstream USB port protection. Device combines ESD protection up to 30 kV, EMI/RFI filtering, and termination into SC70 six lead package. Able to protect upstream circuit elements such as USB controllers, it replaces 10 discrete devices required for same functions. Suppressor provides ESD protection for all data lines as tested under MIL-STD-883D specification. It also offers 15 kV...

Read More »
Magnetic Latching Solenoid suits battery operation.
Solenoids

Magnetic Latching Solenoid suits battery operation.

Model SC0323L pull type, miniature, magnetic latching solenoid offers zero power to hold mechanism, suitable for power management in products that require linear actuation and continual hold with absence of electrical power. Rated at maximum force of 4.5 oz at 0.05 in. stroke (10% duty cycle), solenoid is suitable for medical instrumentation, power management devices, computer peripherals, and...

Read More »
Power Jack comes with indicator light.
Electrical Connectors

Power Jack comes with indicator light.

Through-hole, right angle dc jack has LED for applications where it is necessary to show that power is being supplied to device. Jack is UL94V-0 rated, made of black PBT thermoplastic, and rated to 2.5 A at 24 Vdc. Connector is 12.70 mm in height and available with 1.3 mm center pin. LED can be custom made to show either one or 2 colors. Applications include portable devices such as laptop...

Read More »
Oxygen Electrodes last longer in plasma cutting.
Plasma / Flame / Laser Cutters and Cutting Machinery

Oxygen Electrodes last longer in plasma cutting.

SilverPlus(TM) 200-amp silver/hafnium electrodes last up to 3 times longer than company's previous products. They fit company's Hypertherm HT2000, HT2000LHF LongLife, and MAX200 plasma cutting systems. Electrode has silver front end fused onto copper base. Hafnium emitter interfaces with silver, creating better adhesion and cooling than traditional copper interfaces. Hafnium erodes to...

Read More »
Surge Suppressor suits USB to serial adapters.
Surge Suppressors

Surge Suppressor suits USB to serial adapters.

IND Surge suppression package introduces suppression before surge hits device. Each data line is equipped with surge suppressor capable of sustaining up to 40 A peak, 8 x 20 microsecond peak transient surges, clamping voltage of 30 V (15.5 V for RS-422/485 lines), and peak energy dissipation of 0.1 Joules. Surge suppression package is available for all Quatech 2, 4, 8, and 16 port adapters.

Read More »
Signal Conditioner is software configurable.
Signal Conditioners

Signal Conditioner is software configurable.

DSCP81 voltage/current input signal conditioner measures voltages up to ±1000 Vdc or currents up to ±l00 mA. Output signal can be configured for voltages up to ±l0 Vdc or currents up to ±20 mA. Input/output type, measurement range, and alarm relay are software configurable. Signal conditioner protects measurement and control signals, as well as connected equipment from...

Read More »
Crystal Oscillators feature low standby current.
Oscillators

Crystal Oscillators feature low standby current.

Series CO43S and CO46S cover frequency range of 1.00 to 133 MHz and are offered in frequency stabilities of ± 25, 50, and 100 PPM. Operating current is 3.3 V, with current drains of 12, 25, 35, and 60 mA, depending on frequency range of oscillator. Standby current is 10 microA max. Standard temperature range is -20° to +70°C, and an extended range of -40° to +85°C is...

Read More »
Data Collector processes 9,999 pieces of data.
Electronic Chips

Data Collector processes 9,999 pieces of data.

Hand-held DP-1VR Digimatic Micro Processor prints data directly from Digimatic caliper, micrometer, and similar tools. It provides measurement data recording and tolerance judgement (mode 0), statistical analysis and histogram (mode 1), and D-Chart capabilities (mode 2). DP-1VR records and calculates results to develop X-R control chart (mode 3). It transmits data directly to computer using...

Read More »
Programmable Oscillator provides 300 MHz frequency.
Oscillators

Programmable Oscillator provides 300 MHz frequency.

JITO®-2 Oscillator is offered in all metal, 8- and 14-pin, DIP and plastic, surface-mount packages, in addition to 5 x 7.5 mm ceramic package. Frequency stabilities are ±100, ±50, or ±25 ppm over temperature range of -40 to +85°C, and ±20 ppm over temperature range of -20 to +70°C.

Read More »
Trench IGBT suits induction heating appliances.
Transistors

Trench IGBT suits induction heating appliances.

FGL60N100D 1000 V trench Insulated Gate Bipolar Transistor (IGBT) provides sufficient voltage margins for both quasi-resonant- and single-ended topologies. Trench technology offers high-speed switching performance up to 50 KHz. Transistor includes built-in fast recovery diode. Conductance specifications include: Vce (sat) = 2.5 V @ Ic = 60 A.

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics