Electronic Components & Devices

Electronic Boards

Graphics Board powers IBM IntelliStation workstations.

FIRE GL(TM) 8800 comes standard in 5 different IBM IntelliStation models. It provides 128MB of DDR memory and Workstation OpenGL performance, DVD video playback, as well as support for 3D resolutions (32-bit color) up to 2048 x 1536 pixels. Board offers digital flat panel and various configurations of multiple displays. It uses 165 MHz integrated TMDS transmitter to support DVI up to 1600 x 1200...

Read More »
Housings

Distribution Rack accommodates communications equipment.

Emcor(R) isoNet has 1/4 in. steel floor plates and top members, and 11 gauge steel uprights, providing sturdy mounts for 19 in. networking and data transmission equipment. Shelves can be single or double, and solid or vented for cooling. Patch cord cables can be organized and routed through horizontal-mounted cabling panel or wide, deep tray. Cable channels can be used to route cables between...

Read More »
Electronic Sockets

LGA/BGA Socket offers optional built-in bias springs.

Land grid array/ball grid array (LGA/BGA) socket, suitable for ASIC applications, offers pressure mount contacts on top and bottom. Made from beryllium-copper alloy, with 30 micro in. gold per MIL-G-45204 over 50 micro in. nickel per QQ-N-290, socket also incorporates liquid crystal polymer (LCP). LGA/BGA socket is available in custom materials, plating, sizes, and configurations.

Read More »
Strain-Gage Interface Card handles multiple channels.
Signal Conditioners

Strain-Gage Interface Card handles multiple channels.

AP814 allows 8 strain gage quarter-bridges to be connected in regulated 3-wire circuit so cable resistance effects are fully compensated. All 8 channels operate simultaneously, without scanning or multiplexing. Four excitation voltages are available, providing measuring range of 4-80 mV/V. Gage or bridge factors can be set directly. Measurement-without-Excitation mode allows user to distinguish...

Read More »
Filter Cartridges are impervious to water.
Filters

Filter Cartridges are impervious to water.

Hilco® PH Filter Cartridges have double-screened, synthetic media and are suitable for filtration of steam turbine lube and hydraulic oils. Corrosion-resistant cartridges feature external hold-down spring, O-ring seal and metal end-caps and center tube. They are operational to 100 psid and 250 deg F.

Read More »
Turning and Milling Inserts are PVD coated.
Inserts

Turning and Milling Inserts are PVD coated.

SpectraTurn(TM)and SprectraMill(TM) inserts are coated with TiAln or AlTiN for edge strength and wear resistance. Heat produced in cutting process is carried away by chip. TiAlN coated insert grades are suitable for dry milling and for high-speed turning. AlTiN coated inserts are ideal for milling titanium and titanium alloys.

Read More »
Automatic Tower Press provides 2-sided filtration.
Filters

Automatic Tower Press provides 2-sided filtration.

Totally enclosed Hoesch DS uses polypropylene membranes arranged so that filter cake only contacts filter cloth. Cake discharge is to one side only for easy product recovery. Press is constructed of stainless steel and polypropylene, with other options available. Filters are available in sizes from 19 to 1720 sq ft filtration area. Chemical-processing applications include solvent-wetted processes...

Read More »
Rectifier incorporates PC board.
Rectifiers and Diodes

Rectifier incorporates PC board.

Model 51000 is rated at 24,000 Volts Peak Inverse Voltage at 2.5 Amperes average current, with 300 FPM airflow. PC board optimizes thermal conditions, allowing max current at safe operating temperature. Joining 2 rectifiers provides full-wave bridge for output voltages up to 6 KV. Joining 3 units produces 3-phase, full-wave output to intermediate stages. Applications include DC pulse blocking and...

Read More »
Connectors provide zero insertion force terminations.
Electrical Connectors

Connectors provide zero insertion force terminations.

VDE-certified Eco-Lock connector systems are designed for flexible flat cable/fine-pitch connector applications. Locking cover may be retracted to reopen contacts. Connectors are available in 4-30 pole configurations for 1 mm pitch surface-mount version and 5-35 poles for 1.25 mm pitch fork-type contact version. Both styles are available in horizontal and vertical configurations.

Read More »
One-piece Interfaces connect to power boards.
Connectors

One-piece Interfaces connect to power boards.

OPP Series one-piece power interface, rated up to 5 A, eliminates bent pin problems of multi-component devices. Connectors are soldered to main board and power board is attached by either metric or English mechanical fasteners. Interfaces are available with choice of 3, 7 or 10 contacts on 0.100 in. pitch. Optional alignment pins can be provided on top, bottom or both sides to ease processing,...

Read More »
Locon Sensors Withstand Extreme Temperatures
Sponsored

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers