Electronic Components & Devices

Amplifier conditions strain gages and load cells.
Electronic Amplifiers

Amplifier conditions strain gages and load cells.

MCR-Strain Gage amplifier supports strain gages/load cells with resistances from 120 to 20,000 ohms. It includes 1000 V, 3-way galvanic isolation between power supply, input, and output circuits. Module filters and conditions signals to eliminate unwanted signal noise with DIP switch selectable cutoff frequencies of 30 or 5000 Hz. Outputs are provided for voltage (0 to 10, +/-10, 0 to 5, or +/-5...

Read More »
Connectors complement sensor/actuator distribution boxes.
Electrical Connectors

Connectors complement sensor/actuator distribution boxes.

M8 and M12 connectors feature gold-plated contacts, mechanical safeguard against vibration, and IP67 protection. They come in straight and angled versions, each with male and female contacts in 3, 4, or 5 positions. M8 connectors are available in 3 and 4 positions. Female connectors are available with or without LEDs. Union nuts made of plastic or stainless steel provide corrosion resistance.

Read More »
Pin and Sleeve Connectors carry CE mark.
Connectors

Pin and Sleeve Connectors carry CE mark.

EPIC(R) Pin and Sleeve Connectors conform to IEC 309-2, and are available in North American and International configurations. North American devices are available in 20, 30, 60, and 100 A, while international devices are available in 16, 32, 63, and 125 A. Both versions are available in splash proof (IP44) and watertight (IP67) models. All North American products are UL (UL1682 and UL1686) and...

Read More »
Optical Taps

Optical Jumper provides network monitoring.

Integrated optical/tap jumper can be utilized in any optical transport network such as voice, video, and data systems with optical signals. Tap/monitoring port can be added to any standard patch panel within existing network with no additional frame space. Jumper is also suitable for wavelength division multiplexing and optical power splitting applications.

Read More »
Voltage Controlled Crystal Oscillator fits SONET applications.
Oscillators

Voltage Controlled Crystal Oscillator fits SONET applications.

MPV3 (3.3 V) and MPV5 (5.0 V) series 800 MHz VCXOs are suitable for stability and aging requirements of SONET/STM, Fibre Channel, Ethernet, and Optical Carrier applications, and meet requirements of Forward Error Correction (FEC) applications. Both are supplied in 9 x 14 mm surface mount package with single and dual complementary PECL outputs, and are available in frequencies of 1 to 800 MHz....

Read More »
Computer Consoles suit industrial computer rooms.
Miscellaneous Consoles

Computer Consoles suit industrial computer rooms.

All steel, modular Low Boy computer consoles are suited for process control and distributed control system console (DCS) applications where seated operators need increased visibility over their workstation console. Consoles are less than 48 in. high, and can accommodate one 21 in. CRT monitor. Optional GracePort(TM) Convenience Interfaces provide connections for mouse, keyboard, and VGA...

Read More »
Amplifier powers two channels.
Amplifiers

Amplifier powers two channels.

Model 439 Two-Channel Attenuator-Amplifier has gain range of 118 dB in one dB steps from -78 to +40 dB. Gain is set by front panel rotary encoder and displayed on LCD. Each channel's gain can be set independently or they can be set together. Power amplifier is included to drive stereo headphone for audiometric testing or other use. Clock noise is eliminated by putting microprocessor into sleep...

Read More »
High-Voltage Amplifier suits piezo drives and instrumentation.
Electronic Amplifiers

High-Voltage Amplifier suits piezo drives and instrumentation.

MA17 monolithic op amp, with high-voltage operation of 240 V, provides 17 channels of precision voltage, for driving capacitive loads. Housed in 100-pin Quad Flat Pack (QFP), it has quiescent current under 100 microA per channel, and foot print measuring less than 1.86 sq in. Applications include systems with multiple high-voltage drive channels, such as 3D MEMS mirror arrays, industrial ink jet...

Read More »
Electronic Amplifiers

Multi-Channel Amplifier outputs high voltages.

Dual Channel MA01 delivers up to 330 V, at peak output currents of 120 mA per channel, for loads such as MEMS-based optical switching, piezo positioning systems, ink jet printers, electrostatic deflection and push-pull applications. Precision, monolithic IC provides power bandwidth of 26 Khz at full output voltage. Each channel can operate independently or both channels can be bridged for 660 V...

Read More »
Spool Changer holds 6 spools.
Spoolers

Spool Changer holds 6 spools.

Automatic Spool-Changer automatically changes spools without stopping wire drawing or annealing production process, allowing up to 8 hours of continuous operation. It fits on existing or new wire equipment to reduce labor costs and increase productivity.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers