Electronic Components & Devices

Surface Mount LEDs come in bright colors.
Rectifiers and Diodes

Surface Mount LEDs come in bright colors.

Available in standard 1206, 0805, and 0603 footprint sizes, SMD LEDs include right-angle mount L-110 series, reverse-mount L-193 series, and dome-lens L-650 series. Right-angle LEDs channel light output to the side for edgelighting; reverse-mount LEDs can be mounted on bottom side of PCB for backlighting pushbuttons or for use in locations where clearance poses problems; and dome-lens LEDs are...

Read More »
Oscillators

Spread Spectrum Oscillators reduce EMI without design changes.

Drop-in replacements for conventional oscillators, EQ-HM24s are available in 14 pin DIP packages with gull-wing SMD leads and can cope with -40 to +85°C operating temperatures. Available in 8.0 to 165 MHz versions, they slowly sweep around or below center frequency, allowing electronic devices to comply with appropriate EMI standards. Using SST clock oscillators has no impact on system...

Read More »
Tube Connectors suit high-flow applications.
Connectors

Tube Connectors suit high-flow applications.

Barbed tube-to-tube connectors are designed for use with 3/8 and 1/2 in. ID flexible tubing. Tee, Elbow, and Straight Through configurations are available. Components are molded in lot traceable, virgin, medical-grade polycarbonate and have no parting line on critical sealing surfaces.

Read More »
PCI A/D Board captures data at 600 kHz per channel.
Converters

PCI A/D Board captures data at 600 kHz per channel.

Series PCI-417 handles 16 analog input channels in parallel, with 12-bit A/D resolution. Non-stop streaming design collects gigabytes to memory or disk. Board has 32-bit wide on-board DMA PCI bus master that offloads host CPU. Features include 2 streaming 16-bit analog output D/A channels, 24 bit digital I/O, and local A/D FIFO memory up to 256 Ks to avoid Windows® delays. Models available...

Read More »
Aluminum Connectors suit freestanding wall applications.

Aluminum Connectors suit freestanding wall applications.

Aluminum Connectors, used on CornerForms(TM) panel connector system, feature formed channels that nest metal standards. They include Corner Posts and Three Way Posts that accept 3/4 in. predrilled countersunk holes. Connectors come in 96 in. lengths. Additional aluminum profiles include tubes, bullnose profiles, channel moldings, poster frame and display stand components, and 90 and 180 deg posts.

Read More »
Demo Board aids in LED configuration design.
Rectifiers and Diodes

Demo Board aids in LED configuration design.

PDA-sized demo board allows engineers to explore various LED types, colors, and switches. Demo board comes as functioning unit with over 25 different types of operational LED configurations. Capabilities range from one LED and switch for changing light intensity to multi-stacked LED units that allow mixture of colors, custom spacing, and number of LEDs. Demo board utilizes push button,...

Read More »
Digital Readouts (DROs) suit machine applications.
Readout Systems

Digital Readouts (DROs) suit machine applications.

Three classes of DROs feature absolute/incremental operation, inch/metric conversion, and linear and segmented error compensation. Also offered: switchable resolutions, radius/diameter readings, zero reset/data preset, self diagnostics, center find, and home reference. Models include A50 (basic model), mid-range C70 and C80, and E70-M and -L models. They hold protection ratings of IP67 (fully...

Read More »
Racks and Cabinets accommodate network equipment.
Cabinets

Racks and Cabinets accommodate network equipment.

EIA 310-D industry standard, 19 in. wall-mount racks and cabinets include 5 models in 18 different configurations. Hinged wall-mount panels, available in 1, 2, 4, 6, or 8 rack units accommodate partial network installations or remote nodes, while fixed wall-mount racks in 12, 20, 25, and 32 rack units are suitable for banks of small networking equipment. Racks and cabinets are constructed of 12...

Read More »
Cutting Inserts improve efficiency and productivity.
Inserts

Cutting Inserts improve efficiency and productivity.

Aluminum Cutting Inserts are available in WCGT 05 and WCGT 06 sizes to mount into existing OTM HOLESHOT(TM) and HOLESHOT(TM)-IS (Integral Shank) drills. Available in grade 12, inserts feature highly polished surfaces and up-sharp geometry for drilling aluminum. Their polished surfaces reduce coefficient of friction for drilling in soft, gummy material.

Read More »
Surge Protective Devices incorporate diagnostic monitoring.
Surge Suppressors

Surge Protective Devices incorporate diagnostic monitoring.

Panel-mounted Series 75000 and 74000 SPDs are designed for facilities with 3-phase, WYE-configured systems. Units record and download surge events, and provide visual and audio abnormal condition alarms. They have high rating for maximum single-pulse surge current: 200kA for 74000 models, and 320kA for 75000 models. Seven-mode protection covers each phase to neutral, each phase to ground, and...

Read More »
Let Our Safety Experts Lower Your Risk
Sponsored

Let Our Safety Experts Lower Your Risk

Elite Technical Services provides your company with qualified and experienced safety experts. Specializing in confined space and high-angle technical rescue and jobsite hazard assessment, your workplace safety is the top priority. Check out the video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers