Electronic Components & Devices

Stacked D-SUB has three mounting options.
Electrical Connectors

Stacked D-SUB has three mounting options.

PC99-colored D-SUB with plastic bracket is used with motherboards using ATX or Micro ATX configurations. It is available with parallel port atop two serial ports or one serial port and one VGA connector. It is also available with parallel port atop single serial port, which can be either left or right aligned. D-SUB is made of UL 94V-0 rated PBT thermoplastic; contact material is phosphor bronze...

Read More »
SMT LEDs provide indicator and display lighting.
Rectifiers and Diodes

SMT LEDs provide indicator and display lighting.

1206 LEDs are sized 3mm overall, with die face of 1.5mm. They are available in green with typical wavelength of 560nm and light output ranging from 6.0 to 12.0 mcd; yellow with wavelengths of 580 and 570nm and light output of 6.0 to 12mcd; and red with wavelength of 660nm and 33.6mcd light output. Voltage ratings are 2.1V for green and yellow units, and 1.7V for red.

Read More »
Interface Units provide alternative to A/D cards.
Converters

Interface Units provide alternative to A/D cards.

TWI-FO and TWN-FO convert analog signal into linear, frequency output signal, with 50:50 mark space ratio. They are designed to be used with PLC to convert 4-20mA signal into 10-10Hz frequency, allowing direct connection into digital input on PLC powered by PLC's 24Vdc power supply. TWI-FF and TWN-FF are designed as interfaces between Trimec DP490 Flow Transducer and PLC. Output is 50:50 mark...

Read More »
Analog Output Boards offer 3 modes of operation.
Electronic Boards

Analog Output Boards offer 3 modes of operation.

PowerDAS(TM) PAO-Series analog output boards keep users in control of their output waveforms, independently of speed or interrupt patterns of host CPU. They are pin-for-pin compatible with MetraByte(TM) DDA-16 cards. Operation modes include: Waveform Generation mode, Waveform Update mode, and Conventional Software mode. All boards provide 16 DIO lines and 3 counter-timers, with 8 to 96 analog...

Read More »
Surge Suppressors

Coaxial Surge Protector is suitable for wireless systems.

Model P8AX uses fast-acting gas tubes to provide protection against lightning surges and electrical transients for microwave, radio, antennas, GPS, and satellite and cellular-systems. N, BNC, TNC, SMA and 7/16 connectors are available. Protectors are available for 1 to 1,000 W and any frequency from dc up to 4 Ghz. They can be mouinted on cable assembly, through chassis of equipment to be...

Read More »
Analog Output Boards provide high currents and voltages.
Electronic Boards

Analog Output Boards provide high currents and voltages.

PD2-AO-32/16HC high-current board supplies 90 mA per channel continuously, while 16HV high-voltage version generates ±40 V on each of its output lines. Current board maximum aggregate output current is 1.725 A at 10 V or 1.625 A at -10 V. Adequate cooling is needed if the board sinks more than 1.25 A total, but simply adding fan in chassis is generally sufficient. Both piggyback modules...

Read More »
Precision Core Pins are for luer taper applications.
Pins

Precision Core Pins are for luer taper applications.

Rosspunch pins are precision ground for injection molding of plastic luer taper components. Pins are custom made with tolerances to 0.0005 in. length and 0.0001 in. dia. in steps from 0.006 to 0.750 in. They can be made from all common tool and stainless steels in 0.250 to 10 in. lengths. Pins can incorporate ground ends with radii, flats, symbols and odd shapes. They can also be nitrided, TiN...

Read More »
Surge Protector mounts on DIN rail.
Surge Suppressors

Surge Protector mounts on DIN rail.

Small and compact Model DS 150E heavy-duty ac power surge protector is suitable for wireless base stations, cellular sites and control/instrumentation equipment. It protects 1-phase 110-120 V and 220-250 V ac networks with 3 layers of MOVs and thermal fuses. Protector has power dissipation capability of 140 kA, comes with visual indicators and remote signaling, and is UL 1449 2nd edition-listed...

Read More »
Solenoids enable electrically controlled action.
Solenoids

Solenoids enable electrically controlled action.

Mecalectro(TM) Linear Solenoids include types for standard, intensive, or heavy-duty applications, as well as bi-stable linear solenoids and self-holding latching solenoids designed to promote low energy consumption. Rotary solenoids (in 3 series) provide rotation angles of 45 to 90°. Shotbolts for locking of doors and other mechanisms can function either with power off (passive safety) or...

Read More »
Circular Plastic Connectors accommodate 24-30 AWG wire.
Electrical Connectors

Circular Plastic Connectors accommodate 24-30 AWG wire.

Micro CPC connectors accommodate 2 to 7 contact positions for wire-to-wire, wire-to-board or wire-to-panel installations. Design incorporates a high reliability contact system suitable for use in industrial and instrumentation applications. Spring probe contact technology provides redundant internal current paths when exposed to vibration, motion and mechanical shock. It typically provides up to...

Read More »

All Topics