Electronic Components & Devices

Electrical Connectors

BNC Connectors maximize space for RF applications.

75-Ohm right angle BNC connectors are designed for applications operating from dc to 2 GHz, such as data networking, video, telecommunications and security systems. They are available in 3 profile heights, including 0.625, 0.500 and 0.342 in. above mounting surface. Available with non-tipping board lock or round PCB mounting pins, connectors offer 2-lug bayonet coupling system, providing quick...

Read More »
Resistor Array conserves board space.
Resistors

Resistor Array conserves board space.

Size 0602 CNK1F8 incorporates 8 resistors into 1 package with 0.5 mm pitch and power rating of 63 mW. Unit features thick film resistor element and anti-leaching nickel barrier terminations with 90/10 solder plating. Tolerances are ±1%, ±2% and ±5%, with TCR of ±200 ppm/°C max. Resistance range (E-96 values) is 10 MOhm to 100 KOhm. Applications include...

Read More »
Surge Suppressors come in different sizes.
Varistors

Surge Suppressors come in different sizes.

Metal Oxide Varistor types are engineered with voltage ranges from 18 to 18,000 V and up to 15,000 W. SMD Varistors are available with voltages from 36 to 120 V. Gas Discharge Tubes function up to 500 V and have current ratings to 1,000 A. Units operate without generating significant heat, and maintain voltage levels. Transorb Transient Voltage Suppressors possess voltage clamping of 1.2 at 50%...

Read More »
Potentiometer Switch withstands adverse conditions.
Switches

Potentiometer Switch withstands adverse conditions.

Environmentally sealed with transfer-molded epoxy resin and O ring shaft seal, PA 400 potentiometer switch is resistant to elevated temperatures, corrosion, moisture, water and bodily fluids. Its rotation life lasts 25,000 cycles. From basic configuration of 0.394 in. cube with gold contacts, unit is available with bushings, cases, and flat or rounded shafts in varying lengths. It is designed...

Read More »
Locking Pins are used where quick release is needed.
Pins

Locking Pins are used where quick release is needed.

Kwik-Lok pins are available in five handle styles: T, L, button, recessed button and ring. When buttons are depressed, balls at end of grip shaft retract, permitting insertion or removal. Standard sizes range from 3/16 to 1 in. OD in 1/2 to 6 in. grip lengths. Metric sizes are available from 5-25mm OD in 10-100mm grip lengths. All are made of 17-4 PH stainless steel or carbon steel.

Read More »
GDC Filter has durable plastic frame.
Filters

GDC Filter has durable plastic frame.

ABS plastic frame for Granular Dacor Carbon (GDC) filter is suitable for incineration or landfill disposal. Cartridge is available with specialty carbons for treating light, molecular-weight contaminants and removal of hydrogen sulfide, ammonia, and formaldehyde. Filter uses premium granulated coconut shell carbon in laminated honeycomb. Low pressure drop makes it suitable for retrofitting. It...

Read More »
Carrier Board connects I/O to CompactPCI systems.
Electronic Boards

Carrier Board connects I/O to CompactPCI systems.

ETX single-board computer carrier board module supports peripheral and network connections, enabling accelerated development of embedded systems. Via miniature connectors, PCI bus, ISA bus and I/O signals such as serial ports, parallel port, USB ports, video and LCD signals, Ethernet, keyboard, mouse and audio interface are brought to baseboard, eliminating need to design special interfaces or...

Read More »
Rejection Filters address SATCOM market.
RF and Microwave Filters

Rejection Filters address SATCOM market.

Series 12086 transmit rejection filters are installed between antenna and LNA in receive segment of satellite earth terminals. They are used in C-band transceiver applications to isolate uplink and downlink signals. Units offer low loss, typically less than 0.04 dB on receive signals, while providing high degree of transmit rejection, ranging from 50 to 80 dB. Construction is 100% dip brazed...

Read More »
LED Holder snaps directly into panel.
Mounts

LED Holder snaps directly into panel.

Model LEDHPM-1 holds T-1 3/4 LED securely while it snaps into board or panel. Part snaps into 0.281 to 0.287 in. diameter hole in panel 0.044 to 0.048 in. thick. Snap-in fingers for panel hold LED in place, so no extra retaining rings are required.

Read More »
Board Stackers offer design flexibility.
Stackers

Board Stackers offer design flexibility.

On .100 in. pitch, single, double and triple row through-hole headers (MTSW Series) and stackers (ZW Series), surface mount board stackers (HW Series) and shrouded headers (ZSS Series) are available for board stacking. For micro pitch, board stackers are available on .8mm pitch (AW Series), 1mm pitch (MW Series), .050 in. pitch (FW Series), .050 in. x .100 in. pitch (DWM Series) and 2mm pitch (TW...

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics