Electronic Components & Devices

Carrier Board connects I/O to CompactPCI systems.
Electronic Boards

Carrier Board connects I/O to CompactPCI systems.

ETX single-board computer carrier board module supports peripheral and network connections, enabling accelerated development of embedded systems. Via miniature connectors, PCI bus, ISA bus and I/O signals such as serial ports, parallel port, USB ports, video and LCD signals, Ethernet, keyboard, mouse and audio interface are brought to baseboard, eliminating need to design special interfaces or...

Read More »
Rejection Filters address SATCOM market.
RF and Microwave Filters

Rejection Filters address SATCOM market.

Series 12086 transmit rejection filters are installed between antenna and LNA in receive segment of satellite earth terminals. They are used in C-band transceiver applications to isolate uplink and downlink signals. Units offer low loss, typically less than 0.04 dB on receive signals, while providing high degree of transmit rejection, ranging from 50 to 80 dB. Construction is 100% dip brazed...

Read More »
LED Holder snaps directly into panel.
Mounts

LED Holder snaps directly into panel.

Model LEDHPM-1 holds T-1 3/4 LED securely while it snaps into board or panel. Part snaps into 0.281 to 0.287 in. diameter hole in panel 0.044 to 0.048 in. thick. Snap-in fingers for panel hold LED in place, so no extra retaining rings are required.

Read More »
Board Stackers offer design flexibility.
Stackers

Board Stackers offer design flexibility.

On .100 in. pitch, single, double and triple row through-hole headers (MTSW Series) and stackers (ZW Series), surface mount board stackers (HW Series) and shrouded headers (ZSS Series) are available for board stacking. For micro pitch, board stackers are available on .8mm pitch (AW Series), 1mm pitch (MW Series), .050 in. pitch (FW Series), .050 in. x .100 in. pitch (DWM Series) and 2mm pitch (TW...

Read More »
Surge Suppressor fits in tiny spots.
Surge Suppressors

Surge Suppressor fits in tiny spots.

Tower version of Model 8R15/8R7.5 stands vertically on 4 x 4 in. desk or floor space, providing easy access to On/Off switch. It has two always on" and eight switched outlets. Surge suppressor handles up to three computing systems or several electronic devices.

Read More »
Emergency Ballast Pack converts fluorescent fixtures.
Ballasts

Emergency Ballast Pack converts fluorescent fixtures.

Compact 200 Series, Models 216, 217, 204SX, 211SX and 215SX allow fixture to provide lighting during normal or emergency conditions. During interruption of line voltage, each automatically switches to emergency mode and provides 90 min of lamp operation via rechargeable NiCad battery. When normal power is restored, integral battery charger returns battery to full charge. Ballasts meet NEC and...

Read More »
Power Connectors handle large electrical loads.
Electrical Connectors

Power Connectors handle large electrical loads.

Amphe-Power Connector Series allows users to increase current load per circuit while reducing total number of circuits. Series consists of Power P-lok, GT Reverse Bayonet, and threaded MS5015 style connectors, all incorporating RADSOK socket system. Size 8 AWG contacts handle currents up to 69 A, while size 4 AWG will handle up to 120 A. Based on industrial standard MIL-C-5015, connectors are...

Read More »
Electronic Sockets

RF Test Sockets keep the pressure on.

Spring-loaded lids on radio frequency (RF) test sockets provide consistent lead pressure. Precise pressure requirements can be met with mix-and-match springs from 1/2 to 25 lbs. Each socket comes with floating leadbacker built into every lid, and lids can be used throughout RF/microwave, automated handling and burn-in/life testing applications. Each socket has Microstrip Contacts, which can be...

Read More »
PWM Converters are for mobile equipment and power generation.
Converters

PWM Converters are for mobile equipment and power generation.

PWM Converters provide compact solution for converting pulse width modulated (PWM) signal into analog current or voltage outputs for mobile equipment, industrial automation and power generation applications. Models are available to convert current inputs into PWM outputs. Converters operate from 24 Vdc and other supply voltages, have diagnostic LEDs, are confromally coated for rugged environments...

Read More »
Interconnects are available with 10 to 100 I/Os.
Connectors

Interconnects are available with 10 to 100 I/Os.

TFM and SFM Series .050 in. pitch interconnects are designed for applications requiring blind mating and/or high number of mating cycles. They are available with board spacings from .236 to 1.472 in. Three-finger Tiger-Eye contacts in SFM Series are stamped and formed with soft Beryllium Copper and heat-treated to optimize spring properties. Tiger Eye LITE three-finger contact is also available...

Read More »

All Topics