Electronic Components & Devices

Integrated Circuit powers automotive and industrial motors.
Circuits

Integrated Circuit powers automotive and industrial motors.

Full-bridge, pre-driver Model A3940, suited for large, brush, DC motors, provides 4 gate-drive outputs capable of driving various N-Channel MOSFETs. Bootstrap capacitors provide above-battery supply voltage required for N-Channel FETs, while internal charge pump for high side allows for DC, 100% duty cycle, operation of bridge. PHASE and ENABLE input terminals are provided for controlling speed...

Read More »
Socket/Ratchet Sets deliver SuperTorque® fastening power.
Ratchets

Socket/Ratchet Sets deliver SuperTorque® fastening power.

With low profile design, socket and ratchet sets engage fastener flats for higher torque application. Configurations include: 14-piece, Â-¼ in. drive set; 12-piece, 3/8 in. drive set; 21-piece, 3/8 in. drive set; 12-piece, ½ in. drive set; and 17-piece, ½ in. drive set. Detents on all socket inner walls ensure tight, positive engagement with drive tool in any orientation....

Read More »
LED Modules connect to form customized lighting.
Rectifiers and Diodes

LED Modules connect to form customized lighting.

StripLED® Connectable LED Modules each contain 4 bright, wide-angle (85Â-º) SpiderLEDs, 3 in. double-ended connector harness for daisy chain assembly, and pre-applied strip of 3M® double-sided foam tape. LEDs are wired in parallel and function independently. They are impervious to shock, vibration, frequent switching, and environmental extremes. Average life span is 100,000+...

Read More »
Pull Pins incorporate plastic handles.
Pins

Pull Pins incorporate plastic handles.

Spring-loaded pull pins, with ball or T-handles, allow users to quickly retract and engage plunger for locating, fastening, and quick-change operations. Housing, made of 12L15 steel for welding to fixture, accepts fully retracted plunger. Pins are available with plunger diameters from 1/4-5/8 in. Plungers, made from 1038 steel, have tensile strength of 90-95 ksi on all sizes except 5/8 in., which...

Read More »
I/O Cards suit PC/104 bus applications.
Converters

I/O Cards suit PC/104 bus applications.

High-speed, 16-bit, DSP-based A-D cards, Models 4A24-2 and 4A24-5, are 200 and 500 KHz, respectively. Cards feature EEPROM calibration storage and digital zero and span calibration that eliminates need for potentiometers. Choice of 16 single-ended or 8 differential inputs are provided via input multiplexer. Features include input channel scan sequence, averaging option, raw/calibrated data...

Read More »
Frequency Source suits wireless engineering applications.
Sources

Frequency Source suits wireless engineering applications.

Due to internal Ni-MH battery/charging system, Rhino3(TM) GPS-based frequency source provides reference frequencies anywhere without loss of synchronization. Once GPS satellites are acquired, ovenized crystal oscillator provides absolute accuracy and stability of 1E-10. Portable unit provides input references for 1 pps phase and 10 MHz frequency measurements and adjustment. Unit also offers 12...

Read More »
I/O Board is suited for PC/104 based data acquisition.
Electronic Boards

I/O Board is suited for PC/104 based data acquisition.

With 16-bit resolution, Model 104-AIO16-16 provides 500 Ksamples/second for its 16 single-ended or 8 true differential analog input channels. Functioning over -40 to +85°C temperature range, multifunction I/O board features 11 standard analog input ranges and filtered front end populated with low-noise components. In addition to direct data transfers, board can trigger A/D in real time,...

Read More »
Dual Driver/Receiver comes in single TSSOP package.
Signal Receivers

Dual Driver/Receiver comes in single TSSOP package.

LVDS Model FIN1049 provides high-speed control and data transfer and combines functionality of 2 single D/R devices in 16-lead, TSSOP package. With 400+ Mbps bandwidth, device provides low channel-to-channel and pulse skew of 350 ps max. Rail-to-rail, common-mode range accommodates LVPECL and LVCML logic signals, and power consumption of 90 mW (max) optimizes system power resources and protects...

Read More »
RF Coaxial Connectors suit limited space applications.
Electrical Connectors

RF Coaxial Connectors suit limited space applications.

Series BMMA consists of sub-miniature BMA connectors with push-on blind mate interfaces. Inner conductors and insulators are mechanically captivated to prevent RF leakage. Connectors are suitable for dc to 28 GHz applications, provide 50 Ohm impedance, 675 VRMS dielectric withstanding voltage, 5,000 megohms min insulation resistance, and -90 dB RF leakage. They have 303 SST bodies,...

Read More »
Wallplate Connectors reduce signal loss of coaxial cable.
Electrical Connectors

Wallplate Connectors reduce signal loss of coaxial cable.

RJAX 6040 75 ohm Termination Keystone Connectors provide snap-in connections with RJ-style plug, similar to that used on telephone lines. Self-terminating units prevent ingress and egress of RFI, eliminating signal degradation and undesired emissions. Quick and easy mating and unmating allows equipment and furniture to be arranged and rearranged easily. Applications include TVs, VCRs, home...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers