Electronic Components & Devices

Triple Video Amplifier features internal fixed gain of 2.
Electronic Amplifiers

Triple Video Amplifier features internal fixed gain of 2.

Model LT6553 eliminates need for external gain setting resistors. It features -3 dB bandwidth of 650 MHz, slew rate of 2,500 V/Â-µs, and 6 ns settling time, resulting in sharp video images. Differential phase of 0.01° along with differential gain of 0.01% provide linearity, maintaining signal integrity. Model LT6553 is suited for SXGA and UXGA LCD projectors and monitors, scanners,...

Read More »
Controls and Controllers

PCI Mezzanine Card suits telecom applications.

Optimized for distributed multiprocessing, PmPPC2750 Processor PMC card enables telecom OEMs to add processing power to systems equipped with PMC expansion sites. It features two 800 MHz IBM PowerPC PPC750FX processors, each with 512 kbytes of L2 cache; Marvell Discovery GT-64260B PCI bridge with 133 MHz Processor Bus; and up to 512 MBytes of shared SDRAM. Unit also provides two 10/100 BaseT...

Read More »
Laser Amplifier provides output power of 4 W at 1,048 nm.
Electronic Amplifiers

Laser Amplifier provides output power of 4 W at 1,048 nm.

Based on Ytterbium tungstate, Eclipse(TM) femtosecond amplified laser operates at pulse repetition rates up to 7 kHz and generates pulse widths of less than 500 femtoseconds. Equipped with optional frequency doubler module, Eclipse delivers output power up to 1.5 W at 524 nm. Laser head utilizes modular design in single compact housing, including directly diode-pumped, monolithic low power seed...

Read More »
Coupling Bodies offer various mounting options.
Couplers and Couplings

Coupling Bodies offer various mounting options.

Series APC panel mount coupling bodies are injection molded from acetal thermoplastic and resistant to mild chemical solutions. They withstand max temperatures of 180Â-ºF and pressures from vacuum up to 120 psi. Units enable tubing to be connected and disconnected from panel during use and maintenance. Terminations include hose barbs and ferruleless polytube compression fittings. Plastic...

Read More »
PCB Fabrication Notes Guide
Sponsored

PCB Fabrication Notes Guide

The overall purpose of your fabrication notes is to enhance Design for Manufacturability for optimal PCB fabrication and assembly while maintaining applicable industry standards and regulations.

Read More »
Audio Power Amplifier targets multi-channel applications.
Electronic Amplifiers

Audio Power Amplifier targets multi-channel applications.

Single-chip Model STA5150 delivers 200 W into 4 ohm load with less than 10% distortion. It combines Indigo's BASH topology and Bipolar-CMOS-DMOS process technology. BASH technology uses DMOS power transistors operated in class AB mode, reducing EMI and distortion typical of class D switching amplifiers. By continually adjusting power supply voltage, depending on amplitude of amplified audio...

Read More »
HEPA and ULPA Filters meet stringent air purity requirements.
Filters

HEPA and ULPA Filters meet stringent air purity requirements.

Microguard 99 Filters eliminate particles down to 0.3 microns with efficiencies of 99.97, 99.99, and 99.999%. Microglass fiber media is waterproof and heat-resistant to 1,000°F. Corrugated aluminum separators allow maximum use of media and high filter pack integrity. Classified UL Class 1, Class 2, and 586, filters are suited for environments such as health care, pharmaceutical,...

Read More »
Computer Processors

I/O System supports use of open-source technologies.

Linux-based SNAP-ARL-ASDS programmable I/O processor mounts on standard SNAP B-series mounting racks and interfaces with mix of analog, digital, and serial SNAP I/O modules. Featuring RS-232 serial port and 10 Mbps Ethernet connection, system supports multiple file transfer protocols, including FTP and Samba. Programmers can use Linux-based tools to develop custom applications for SNAP-ARL-ASDS...

Read More »
Arrays

FPGAs offer digital signal processing speeds to 333 MHz.

Stratix(TM) FPGA models EP1S80 and EP1S60, available with 79,040 and 57,120 logic elements, respectively, are available in -5 speed grade to DSP speeds to 333 MHz and data rates to 300 MHz. Built on 0.13-micron, all-layer copper process, devices provide up to 22 embedded DSP blocks, which consist of hardware multipliers, adders/subtractors, accumulators, and pipeline registers. They offer...

Read More »
Programming System supports F2812 DSP.
Signal Processors

Programming System supports F2812 DSP.

Suited for use with 32-bit F2812 digital signal controller, PS300 automated programming system accommodates up to twelve 4-socket adapters and is designed specifically for Flash-based applications. Architecture provides system scalability and software-based process control.

Read More »
Lead Set allows 4-wire resistive measurements.
Leads

Lead Set allows 4-wire resistive measurements.

Model 6730 low-ohm Kelvin Lead Set incorporates gold-plated clips and nickle-plated Beryllium copper wire wrapped in silicone. Leads utilize wide-opening 0.800 in. alligator clip design plus retractable-sheath banana plugs for connecting to various calibration test equipment. Color-coded set is rated at 1000 V, CAT III, with 20 A current maximum and is suitable for calibration, design, and test...

Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Sponsored

Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions

Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.

Read More »

All Topics