Electronic Components & Devices

Electrical Connectors

D-Sub Connector comes in 15-62 I/O variants.

Available in 330 and 1,000 pF configurations, RoHS-compliant high-density filtered D-Sub connector features dense contact arrangement. Using turned pin contacts, connector shells are available in bright tin or nickel finish. Filter elements are encapsulated using epoxy resin for optimal performance characteristics in hazardous environments.

Read More »
Connectors comply with MicroTCA(TM) specification.
Electrical Connectors

Connectors comply with MicroTCA(TM) specification.

Providing 170 contacts on 0.75 mm pitch, press-fit, Vertical Card Edge Connector enables AdvancedMC(TM) cards to be plugged directly to backplane, accommodating speeds up to 10 Gb/s. Surface mount version utilizes PCB footprint and will support differential signals at data rates up to 12.5 Gb/s. Available to handle 48, 24, or 12 Vdc, D-Subminiature Connectors enable DC input connections to power...

Read More »
Capacitors

Polypropylene Film Capacitors target AC applications.

Featuring built-in Fuseac technology to protect against overheating, 5MPF Series is housed in aluminum cylindrical can with plastic header, radial terminals, and mounting bolt to meet power management systems' requirements. Internal fuse electrically disconnects when capacitor's hot spot reaches defined temperature, without deforming case. With voltage ratings of 300, 600, and 900 Vac, capacitors...

Read More »
Analog-to-Digital Converter guarantees 16-bit performance.
Converters

Analog-to-Digital Converter guarantees 16-bit performance.

Housed in 3 x 2 mm DFN package, I2C-compatible Model LTC2453 operates from single 2.7-5.5 V supply and measures differential input up to ±VCC. Delta sigma unit achieves 16-bit dc performance of 2 LSB integral nonlinearity error, 1.4 Â-µVrms transition noise, and 0.01% gain error. With internal oscillator and up to 60 conversions/sec, device enables measurement of temperature, pressure,...

Read More »
Power Supplies

DC-AC Inverter drives CCFL lamps in LCD applications.

Designed for backlighting two 10-15 in. industrial LCD panels, Model LS6D0812A-RH provides dual LCD panel capability, and features brightness/backlight on-off control and 5 V (Typ) alarm output if inverter detects CCFL open condition in LCD display systems. RoHS-compliant unit provides 12 Vdc input, output current of 3-6 mArms per lamp, 1,500 Vrms start-up voltage, 1 A maximum input current, and...

Read More »
Electronic Mixers

Measuring Mixer and Extruder System meets QC needs.

Available in table and floor models, HAAKE PolyLab QC enables QC staff to characterize sample's properties by gas flow, electric conductivity, or capillary viscosity measurements. Modular torque rheometer can be connected to interchangeable mixer, single-screw extruder, or conical twin-screw extruder. Offering backwards compatibility, existing measuring mixers and extruders can also be connected....

Read More »
Variable Resistors use fine and coarse control mechanisms.
Resistors

Variable Resistors use fine and coarse control mechanisms.

Featuring PXI form factor, 3-channel Series 40-260 covers resistance range of 90 W to 8 kW. Resistance setting resolution is better than 10 mW over entire resistance range and accuracy is better than 0.1% for all resistance settings. Suited for simulating RTD's and strain gauges in test environment, modules include calibration port that can be used to calibrate resistor channels while unit is...

Read More »
Electrical Connectors

Circular Connectors withstand harsh, rugged applications.

Offering water-tight construction, over-molded Amphe-Armor Series is available in variety of shell sizes and contacts with PT or GT insert option. Field-installable, field-repairable units are constructed of high-impact glass-filled thermoplastic with solder wire termination and heavy-duty coupling nut. Rated to IP67, connectors operate in temperatures from -67 to +267°F. Applications...

Read More »
Clamshell Burn-In Socket accommodates QFN packages.
Electronic Sockets

Clamshell Burn-In Socket accommodates QFN packages.

Able to accept QFN packages down to 0.35 mm pitch, 880 Series features compression mount clamshell that allows chipmakers to remove or replace sockets and retain production capacity if they were to be damaged. Specifications include beryllium copper alloy contact, gold contact plating, 20 g contact force, temperature rating of -40 to 155°C, and durability of 30,000 cycles. Socket's...

Read More »
Converters

Ethernet Protocol Converters empower SFF platforms.

PicoNodePDH supports single-channel mapping of Ethernet to multi-channel PDH, while Piconode(TM) supports single-channel SONET/SDH via industry standard GFP, VCAT, and LCAS protocols. Supplied in 11 x 11 mm, 204-pin BGA package, both products are suited for small-form-factor (SFF) protocol conversion applications and support 10/100/1000 Ethernet LAN port. PicoNodePDH supports multiple DS3/E3 or...

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers