Coaxial Resonator Oscillator includes frequency doubler.
Operating from 5,685–5,780 MHz with tuning voltage range of 0.3–4.7 Vdc, Model CVCO55CXT-5685-5780 features typical phase noise of -102 dBc/Hz at 10 KHz offset. Coaxial-based VCO exhibits output power of 0.0 dBm into 50 Ω load with supply of +5.0 Vdc and current consumption of 25 mA max. Housed in 0.5 x 0.5 in. package, USA-made device minimizes Pushing and Pulling to 1.5 MHz/V and 0.5 MHz,...
Read More »Tantalum Through-Hole Capacitors feature 75 V rating.
New 75 Volt extensions offer the highest voltage and deliverable energy with the lowest leakage current GREENVILLE, S.C. -- KEMET Corporation (NYSE: KEM), a leading manufacturer of tantalum, ceramic, aluminum, film, paper and electrolytic capacitors, today announced its release of 75 volt product extensions for the T550 Polymer Hermetic Seal (PHS) Series of tantalum through-hole capacitors....
Read More »Tantalum Through-Hole Capacitors feature 75 V rating.
New 75 Volt extensions offer the highest voltage and deliverable energy with the lowest leakage current GREENVILLE, S.C.- -- KEMET Corporation (NYSE: KEM), a leading manufacturer of tantalum, ceramic, aluminum, film, paper and electrolytic capacitors, today announced its release of 75 volt product extensions for the T550 Polymer Hermetic Seal (PHS) Series of tantalum through-hole capacitors....
Read More »Solar-Powered LED Beacon is capable of 24/7 operation.
Offering built-in magnetic or permanent mounting base options, SLEDB-5-M- LED strobe light incorporates solar panel and internal batteries. This 4 in. tall product, which can run endlessly on 4–5 hr of daily sunlight, is suited for use as warning or barricade light as well as other off-grid applications. If there is no sunlight for several days, operators can charge beacon via included...
Read More »Reflective Tapes and Their Visibility Control Applications
This ebook provides an overview into reflective tapes and their visibility control applications.
Read More »Solar-Powered LED Beacon is capable of 24/7 operation.
Offering built-in magnetic or permanent mounting base options, SLEDB-5-MÃ- LED strobe light incorporates solar panel andÃÂ internal batteries. This 4 in. tall product, whichÃÂ can run endlessly on 4–5 hr of daily sunlight, is suited for use as warning or barricade light as well as other off-grid applications. If there is no sunlight for several days, operators can charge beacon...
Read More »SMT Power Inductors use ferrite core material.
Offered in sizes from 7.6 x 7.4 x 6.4 mm to 21.7 x 21.5 x 12.5 mm, Round-Wire Coil Surface Mount Power Inductors range from 0.3–50 -µH with current rating up to 70 A. Models PG0871NL, PG0702NL, PG0926NL, PH0936NL, and PG1083NL have unconnected third pin that distributes weight and balances 3 terminals during mechanical vibration. Flattened leads serve as pad, making coil self-leaded. Inductors...
Read More »SMT Power Inductors use ferrite core material.
Offered in sizes from 7.6 x 7.4 x 6.4 mm to 21.7 x 21.5 x 12.5 mm, Round-Wire Coil Surface Mount Power Inductors range from 0.3–50 Ã-µH with current rating up to 70 A. Models PG0871NL, PG0702NL, PG0926NL, PH0936NL, and PG1083NL have unconnected third pin that distributes weight and balances 3 terminals during mechanical vibration. Flattened leads serve as pad, making coil self-leaded....
Read More »Heat Sink Mounting System ensures optimum heat dissipation.
Comprising Type HSCB™ captivating screw and Type HSL™ spring mated to Type HSR™ broaching receptacle nut or standoff, PEM-® Heat Sink Mounting System securely attaches heat sinks to circuit boards while providing firm and constant contact to chip component. System integrates audible click feature to prevent over tightening during installation, accommodates slight expansion and contraction...
Read More »Heat Sink Mounting System ensures optimum heat dissipation.
Comprising Type HSCB™ captivating screw and Type HSL™ spring mated to Type HSR™ broaching receptacle nut or standoff, PEMÃ-® Heat Sink Mounting System securely attaches heat sinks to circuit boards while providing firm and constant contact to chip component. System integrates audible click feature to prevent over tightening during installation, accommodates slight expansion and...
Read More »Signal Generators operate through 4 GHz.
Featuring aluminum construction, Lab Brick LMS Series meets demand for defined frequency bands through 4 GHz, specifically 70-450, 250-1,500, 600-3,200, and 1,000-4,000 MHz with- output power options of +10, +13, and +20 dBm, depending on model. USB-compatible, synthesized units feature 100 µs switching time and 100 Hz frequency resolution, with no additional DC supply voltage. Advanced...
Read More »Triad WAU Wall Plug-In AC Power Supply May Be First To Meet Level VI Energy Efficiency Standard
Triad Magnetics, an industry leader and one of the most trusted names in transformer design and manufacturing, is proud to announce the release of the Triad WAU Wall Plug-In AC Power Supply. Engineered to provide robust performance and high reliability, it is setting the standard for 120V/60Hz power supplies. See our video to learn all about it.
Read More »