Electronic Components & Devices

Passive Harmonic Filters operate at 99% efficiency.
Filters

Passive Harmonic Filters operate at 99% efficiency.

Available in NEMA 1 and 3R enclosures, ECOsine® FN3415 Filters benefit electrical systems by limiting amplitude of current harmonics, minimizing losses, and maximizing efficiency. Devices are installed at typical 3-phase voltage of 480 Vac (±10%) or 600 Vac (±10%) at 60 Hz (±1 Hz). TDD and THDI performance at full, light, and no-load conditions is ≤5%, while THDv ratings...

Read More »
Transistors

N-Channel MOSFETs support synchronous buck applications.

To save space and power in synchronous buck converters used for automotive applications, 12 V Model SQJ202EP and 20 V Model SQJ200EP each combine high- and low-side MOSFET in 5 x 6 mm PowerPAK® SO-8L dual asymmetric package. AEC-Q101-qualified devices offer high temperature operation to +175°C. SQJ202EP is suited for applications with bus voltages ≤ 8 V and offers low max...

Read More »
Power Supplies

DC-DC Converters include companion EMI filters from 1-20 A.

Available in models ranging from 5–100 Watts, VHR Series powers non-flight-critical programs in military, avionics, and unmanned systems as well as manufacturing equipment and controls. Units offer wide input range for nominal 28 V input and average efficiency of 85%. Designed to operate at full-load over temperature range of -40 to +100°C, series features fixed frequency operation,...

Read More »
Resistors

Future Electronics Promotes Power Metal Strip Resistors from Vishay

Pointe Claire, Quebec - Future Electronics, a global leading distributor of electronic components founded in 1968 by Robert Miller, recently announced immediate shipping availability of Power Metal Strip resistors from Vishay. Vishay's new surface mount Power Metal Strip current sense resistor is in a compact 1206 case size that combines an extended power rating to 0.5W with a Kelvin...

Read More »
Conduction Cooled Capacitors are rated to 1,200 A RMS, 1,100 Vac.
Capacitors

Conduction Cooled Capacitors are rated to 1,200 A RMS, 1,100 Vac.

HC and LC Series can be used in resonant power circuitry ranging from 9 kHz to 1 MHz depending on capacitance value, which ranges from 0.05–37 Â-µF. While LC Series features large flat copper plates, HC Series consists of compact, rectangular block types. These self-healing parts, depending on series, are designed with single or multiple element construction and feature impregnated...

Read More »
M12 Connectors support high-speed applications.
Electric Wire, Cable and Cable Assemblies

M12 Connectors support high-speed applications.

With data transmission rates up to 10 Gbps, M12 XÂ-­coded products meet CAT6A specifications, have 8 contacts, and conform to DIN IEC 61076­2­109. Each connection supports up to 0.5 A and 60 V. When fully mated, connection is IP67 rated. Along with male and female receptacles with dip solder angled contacts that offer versatility when designing panels and mounting...

Read More »
Aluminum Electrolytic Capacitor features glass-to-metal seal.
Capacitors

Aluminum Electrolytic Capacitor features glass-to-metal seal.

With glass-to-metal seal that prevents dry-out, Slimpack Type MLSH handles demanding military and aerospace applications. Hermetic unit features 1.5 V reverse voltage and maximum operating temperature of 125°C, with no derating required. Measuring 1.0 x 1.5 x 0.5 in., unit can replace parallel and series banks of wet tantalum capacitors in new and existing designs, especially where bulk...

Read More »
Resistors

Grid Resistors feature stainless steel resistive element.

Utilizing magnetic stainless steel material, GRE1, GRE2, and NGR Grid Resistors provide TCR of ±365 ppm/°C and deliver corrosion resistance for dynamic braking resistors, testing of load banks, and motor control. Devices utilizing non-magnetic stainless steel alloy offer TCR of ±930 ppm/°C. GRE1 and GRE2 models combine power ratings up to 24 kW with operating temperatures...

Read More »
N-Channel Power MOSFET maintains typical Rdson of 54 mOhm.
Transistors

N-Channel Power MOSFET maintains typical Rdson of 54 mOhm.

Offered in 1.53 x 0.77 mm silicon-based package, 60 V Model CSD18541F5 maintains typical on-resistance of 54 mΩ at 10 V gate-to-source, and is designed to replace standard small-signal MOSFETs in space-constrained industrial load-switch applications. LGA package features 0.5 mm pitch between pads for easy mounting and is 80% smaller than traditional 60 V load switches. Integrated ESD protection...

Read More »
World Chess Hall of Fame Chess Set to Feature Threaded Inserts from Yardley
Inserts

World Chess Hall of Fame Chess Set to Feature Threaded Inserts from Yardley

Yardley’s high quality threaded metal inserts are used for a wide range of fastening applications for OEMs and various other industries. You’ve seen them in outdoor furniture, RC jet boats, fighter jets, and much more. Now you’ll see them in a World Chess Hall of Fame chess set, “Royal Parts”! April Baker, an artist from Wisconsin, stepped out of the box and created a full chess set out...

Read More »

All Topics