Electronic Components & Devices

Voltage Controlled Oscillator operates at 2,900-4,400 MHz.
Oscillators

Voltage Controlled Oscillator operates at 2,900-4,400 MHz.

Housed in MINI-16-L package measuring 0.5 x 0.5 x 0.13 in., Model V846ME29-LF features tuning voltage of 1-22 Vdc, typical phase noise of -80 dBc/Hz at 10 kHz offset, and typical tuning sensitivity of 90 MHz/V. Unit delivers output power of 8 dBm at 8 Vdc supply while drawing 26 mA over temperature range of 0-50°C. With typical second harmonic suppression of -18 dBc, RoHS-compliant device...

Read More »
Converters

Up-Converter targets microwave and millimeter wave applications.

Consisting of GaAs MMIC I/Q up-converter in SMT ceramic package, Model RFUV5945A accelerates radio design and minimizes board space by integrating I/Q mixer, LO buffer amplifier, and output driver amplifier within 5 x 5 mm outline. Operating across frequencies of 10-16 GHz, device provides single up-converter solution for 11, 13, and 15 GHz microwave radios. DC to 4 GHz IF frequency range ensures...

Read More »
Waterproof Connectors suit quick disconnect applications.
Electrical Connectors

Waterproof Connectors suit quick disconnect applications.

Molded to 10 conductor type SOOW 600 V cable, Industrial/Commercial Grade Quick Disconnect Connectors feature max rating of 7 A and are weatherproof when capped or mated. Units are molded in Hypalon rubber permanently bonded to heavy-duty 14 AWG cable. Design isolates contacts from each other and creates watertight seal, allowing mated pairs to be immersed in up to 6 ft of water. Connectors are...

Read More »
Signal Generators

Programmable Pulse Generators operate from 0.1 Hz to 50 MHz.

Delivering clean and accurate pulses for testing digital circuits and systems based on TTL, CMOS, or ECL logic families, Models 4033/4034 provide flexible control over pulse timing, level thresholds, and transition edges. They also support multiple trigger modes and offer closed case calibration as well as SCPI-compatible programmability via GPIB or RS-232. Functioning as 2 units in one, Model...

Read More »
SMT TVS Diode Arrays protect multiple circuit traces.
Rectifiers and Diodes

SMT TVS Diode Arrays protect multiple circuit traces.

Operating in temperatures from -55 to +150°C, ROHS-compliant QDN Series can protect 1-8 circuit traces against ESD, lightning, and other electrical fast transient (EFT) events rated under 40 kV. Series is comprised of IEC-compatible TVS diode arrays and carries peak pulse power rating of 500 W. Offered in 8-, 14- or 16-pin SOIC-N and SOT-23 SMT packages, products are available in...

Read More »
Mounts

Swing-Out Monitor Mount has dual-pivoting design.

Used in situations requiring 2 ranges of monitor movement, TH-1032-VFM provides full tilt and pan functions for displays up to 25 kg or 32 in. Ball-joint mechanism allows infinite adjustment of up to 20° in any direction, and tension adjustment lets installers and end-users optimize viewing angle without screwing/unscrewing bolts. Further functionality allows selectable display orientations...

Read More »
Assembly Services

AdvancedMC Card suits wireless front-end applications.

Based on Xilinx Virtex-6 LX240-T FPGA, Model AMC-V6 is suited for wireless radio head interfacing applications requiring multiple CPRI links at up to 6.144 Gbps line rate. IDT CPS-1848 SRIO switch supports Serial RapidIO V2.1 at speeds up to 20 Gbps per port. In addition to 3 front panel SFP+ optical interfaces, card includes 2 banks of DDR3 SDRAM with 128 Mb 16-bit memory and 256 Mb 32-bit...

Read More »
Electronic Amplifiers

Self-Calibrating Op-Amps suit portable instrumentation.

Featuring rail-to-rail I/O, MAX9613/MAX9615 op-amps offer self-calibration feature that automatically compensates for errors generated over time or by temperature changes and which activates each time system is powered up. Units operate from 1.8-5.5 V supply and consume 220 Â-µA of quiescent current. Specified over -40 to +125°C temperature range, they have offset voltage of 100...

Read More »
Floor Boxes have tamper resistant design.
Electrical Enclosures

Floor Boxes have tamper resistant design.

Featuring receptacles, multimedia dividers, Cat 5e jacks, and F-connectors, Tamper-Resistant Floor Boxes install in wood and concrete with smooth, nearly flush appearance and meet National Electrical Code® tamper-resistant standards. Design depth leaves room for wiring, and 4 knock-out wire entries and 2 auto-clamp entries promote wiring flexibility. Featuring die-cast cover plate...

Read More »
Electronic Chips

STMicroelectronics' STarGRID(TM) Power-Line Communication Chip Used in Smart-Metering 'STAR Project' in Spain

ST's smart-metering System-on-Chip platform offers high flexibility to meet differing technical requirements and standards worldwide Geneva - STMicroelectronics (NYSE: STM), one of the world's leading semiconductor manufacturers and the number one supplier worldwide of power management solutions, today announced that its new STarGRID(TM) ST7590 power-line communication (PLC) System-on-Chip (SoC)...

Read More »

All Topics