Electronic Components

New SAM R34/35 System-in-Package (SiP) Microcontroller Operates in 862 to 1020 MHz Range
Miscellaneous Controllers

New SAM R34/35 System-in-Package (SiP) Microcontroller Operates in 862 to 1020 MHz Range

The SAM R34/35 System-in-Package Microcontroller is offered in a 6 x 6 mm package and is embedded with SAM L21 Arm® Cortex®-M0+ based MCU, transceiver and software stack. The product is used in applications such as broad array of long-range, low-power IoT applications. The LoRa technology uses LoRaWAN open protocol that is suitable for use in smart cities, agricultural monitoring and supply...

Read More »
New Digital Input Devices from Maxim Use Less Power
Electronic Components

New Digital Input Devices from Maxim Use Less Power

Maxim’s new digital input devices have a smaller footprint, while achieving a higher power throughput. The MAX22190 is an 8-channel octal digital input with Serial Peripheral Interface (SPI). It has accurate input current limiters, built-in surge protection of >1kV, and wire break detection in a 5mm x 5mm package. The MAX22191 is a single-channel, parasitically powered digital input. It also...

Read More »
New High Temperature TRIAC from Littelfuse is Suitable for Internet of Things (IoT) Applications
Semiconductors

New High Temperature TRIAC from Littelfuse is Suitable for Internet of Things (IoT) Applications

LittelFuse’s offers LJxx04xx and QJxx04xx (4-Amp), LJxx06xx and QJxx06xHx (6-Amp) and LJxx08xx and QJxx08xHx (8-Amp) TRIACs in TO-251 (VPAK) or TO-252 (DPAK) packages. The units are suitable for 24 VAC control, 110 VAC, AC solenoid/valve control, AC heating control and AC motor control applications. It features a maximum junction temperature of 150°C and a high surge capability simplifies...

Read More »
New HMR CAN Rotary Device Allows Blind Operation
Electronic Components

New HMR CAN Rotary Device Allows Blind Operation

Danfoss’ HMR CAN Rotary Device provides five-finger control with seven large push buttons and one central select button. Unit can be coordinated with existing machine’s and is suitable for off-highway applications such as road rollers, concrete pavers, telehandlers and compact wheel loaders. CAN rotary device meets mechanical, electrical and ingress protection standards. The indicator lights,...

Read More »
Slim IO-Link Master meets IP67protection standards.
Electronic Components

Slim IO-Link Master meets IP67protection standards.

Slim IO-Link Master is enhanced with Type A or Type B port functionality and is available in EtherNet/IP, PROFINET and EtherCAT industrial networks. The Type A model can host up to 124 configurable I/O points and 4 additional I/O whereas the Type B model used for connecting IO-link valve manifolds. Having 2 A of output current per channel, units come with built0in switch for daisy chaining and...

Read More »
Electronic Components

CineSnake from ETS

Cinematographers, grab your CineSnakes, a roll of Cat5 cable and go! The CineSnake™ (PA210 Series) are passive units (external power not required). The CineSnake accepts 'mic' level, line level, analog or digital audio and supports phantom power. Initially designed for the Canon C100 and C300 digital Cine cameras, the CineSnake is also compatible with many Sony and Panasonic cameras...

Read More »
Electrical Connectors

ETCO Innovates again by Customizing GBBA and FAE to Plug into PCB Boards

Bradenton, FL -- In order to solve a challenge for a manufacturer of smart power outlets, ETCO came up with a novel idea. Remove the ear sections on ETCO GBBA and FAE and replace them with pins that plug directly into a PCB board. They are then soldered in place. The ETCO GBBA plugs into the wall socket and consumers plug their devices into the FAE on the other side of the device. The power is...

Read More »
Zero Bias Schottky Detectors display flat frequency response.
Electrical Sensors / Detectors / Transducers

Zero Bias Schottky Detectors display flat frequency response.

Supplied in cylindrical, passivated stainless steel package, zero bias Schottky detectors display flat frequency response over frequencies from 10 MHz to 26.5 GHz. SMA, BNC, and N Type connector configurations enable use with precision test and measurement, instrumentation, and subsystems assemblies. Along with matched inputs for optimal VSWR, features include voltage sensitivity levels from...

Read More »
Cable Extenders

Portable Extension Devices feature 12G/4K capabilities.

BarnMini-11 delivers point-to-point digital extensions, while BarnMini-12 features 2 x SFP ports for transceivers and offers capacity of up to 3G SFPs. Equipped with re-clockers as standard, both units can handle 12G, 10G, 4K, and any other video format with lower data rate than 12G. These products are available as standalone units with separate PSU or mounted into BarnMini frame.

Read More »
Frequency Synthesizers

Frequency Synthesizers, Rate Converters boost design reliability.

Able to create complete clock tree, miClockSynth™ ZL30260–ZL30267 devices include 4 independent frequency families, up to 10 differential or 20 single-ended configurable outputs, and 2 fractional-N APLLs with fractional and integer divider. Output jitter is 170 fs RMS, and any-rate frequency conversion supports input from 10 MHz to 1.2 GHz and output frequency from < 1 Hz...

Read More »

All Topics