Electronic Bridges

Electronic Bridges

Powerline to Ethernet Bridge facilitates network creation.

Based on SPC300 HomePlug AV SoC, SPR300-AV Pass-Through Reference Design enables entire-premise HD quality entertainment over electrical wires. Integrated noise filter optimizes performance, and integrated socket leaves electrical outlet available to plug in another appliance. Within its modular design, digital portion fits into 30 X 65 mm module, which plugs into power supply mother board....

Read More »
Industrial Ethernet Extenders offer 8,530 ft range.
Electronic Bridges

Industrial Ethernet Extenders offer 8,530 ft range.

Using existing device-network infrastructure, point-to-point iCON-32300 series can extend Ethernet connectivity in facilities over existing copper telephone wire or coaxial cable without pulling extra cable. RoHS-compliant products establish high-speed remote connection between 2 Ethernet networks. Ruggedized aluminum case is wall, DIN-rail, and panel-mountable and allows for operation between...

Read More »
Wolverine 200-Series Gets Class 1, Division 2 Approval
Electronic Bridges

Wolverine 200-Series Gets Class 1, Division 2 Approval

Three models in the popular Wolverine Ethernet Extender series from Westermo have been enhanced with the Class 1, Division 2 approval. This allows the Wolverine series to be installed in hazardous or potentially explosive environments containing volatile, flammable vapours and gases. Class 1 Division 2 is a location in which volatile flammable liquids and gases are handled but where they are...

Read More »
Electronic Bridges

Wireless Ethernet Bridge offers 5 Mbps throughput.

Delivering 100 W of effective isotropic radiated power and 20 independent non-overlapping RF channels, AW5800HTP-PAIR is suited for wireless connections to IP-based megapixel surveillance cameras. Unit offers line-of-sight connection up to 15 miles away without loss of bandwidth, security, or performance. Product delivers machine to machine communications for security applications, access...

Read More »
New IP67-Rated AP/Bridge/Client Extends Wireless Applications to Critical Outdoor Environments
Electronic Bridges

New IP67-Rated AP/Bridge/Client Extends Wireless Applications to Critical Outdoor Environments

Taipei, Taiwan, Jan. 16, 2009 - The AWK-4121 is the latest outdoor 3-in-1 wireless access point/bridge/client from Moxa with IP67 certification. Designed for outdoor industrial wireless applications, the AWK-4121 can withstand extreme weather conditions and temperatures from -40 to +75°C. Outdoor industrial environments, such as mines and oil fields, are often subject to extreme temperatures...

Read More »
LAN/WiFi Modules target machine-to-machine applications.
Electronic Bridges

LAN/WiFi Modules target machine-to-machine applications.

Based on CO2144 Internet Controller, Nano Socket iWiFi consists of 802.11b/g embedded WiFi module with integrated WiFi antenna, while Nano Socket LAN is a 10/100BaseT LAN module with integrated RJ45 connector. Modules serve as communications offload engine and inherent firewall, protecting embedded device from Internet attacks. They support several modes of operation, including Serial-to-LAN/WiFi...

Read More »
Electronic Bridges

Bridge connects serial devices to Ethernet networks.

With NET 620 Serial to Ethernet Bridge, users can integrate serial connected devices into Ethernet networks without complicated network interface. No special PLC configuration is needed to integrate DF1 or ModBus RTU devices into EtherNet/IP or ModBus TCP/IP networks. Device can be configured using supplied SetLinc(TM) utility software or web browser, and for most installations, user must only...

Read More »
Access Points extend wireless range to more than 40 km.
Electronic Bridges

Access Points extend wireless range to more than 40 km.

Featuring integrated Intel TDMA technology, JetWave 2600 Series communicates over distances of at least 40 km without sacrificing transmission quality. JetWave 2610 and 2620 are built on IEEE 802.11a standard for wireless transmission networks and use 5 GHz bandwidth as operating frequency, while JetWave 2640 adopts dual band, IEEE 802.11a and 802.11g standards technology. All support base...

Read More »
Electronic Bridges

EtherCAT Bridge Terminal helps optimize synchronization.

Suited for complex machines and production lines, Model EL6692 achieves synchronization and distributed clock calibration between EtherCAT masters directly in I/O system. Terminal can also help integrate subordinate PCs as EtherCAT slaves in EtherCAT network. EtherCAT I/O Terminal system permits communication to 1,000 distributed I/O in 30 Â-µs, almost unlimited network size, and vertical...

Read More »
Electronic Bridges

Ethernet Bridge Technology helps connect A/V equipment.

Suited for consumer and professional applications, BroadSync(TM) HD technology enables streaming of HD audio/video (A/V) traffic over Ethernet to networked electronic devices. This custom implementation of IEEE 802.1 Audio Video Bridging (AVB) draft standard provides QoS, frame synchronization, and timing required for professional-quality streaming. Also promoting material reduction, solution...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics