Electronic Bridges

Electronic Bridges

Communication Module supports solar charge controllers.

With multiple standard communication interfaces including RS-485 Modbus, Ethernet based Modbus/IP, and FTP data upload, Universal Communication Module provides communication bridge or gateway between IPN network-based Solar Boost(TM) charge controllers and external system. Built in web server allows remote access to all charge controller data and setup parameters over Internet. UCM also provides...

Read More »
Electronic Bridges

PCIe-to-PCI Bridge aids legacy device migration.

Available in 14 x 14 mm QFP and 10 x 10 mm QFN packages, PEB383 provides transition from legacy PCI to PCIe to support application migration. It is tailored to match design characteristics of processors, such as Intel and AMD, facilitating integration. Along with low power consumption, features such as buffering and queuing techniques help improve overall system efficiency. PCIe port, which...

Read More »
Electronic Bridges

Powerline to Ethernet Bridge facilitates network creation.

Based on SPC300 HomePlug AV SoC, SPR300-AV Pass-Through Reference Design enables entire-premise HD quality entertainment over electrical wires. Integrated noise filter optimizes performance, and integrated socket leaves electrical outlet available to plug in another appliance. Within its modular design, digital portion fits into 30 X 65 mm module, which plugs into power supply mother board....

Read More »
Electronic Bridges

Ethernet Booster extends IEEE 802.3af Power-over-Ethernet.

Operating over CAT5 cable, CopperLink(TM) Model 2110 transparently extends 100 Mbps Ethernet traffic along with IEEE 802.3af PoE up to 656 ft. With multiple boosters installed in daisy chain, unit can extend PoE up to 1,640 ft. Because Model 2110 eliminates need for UPS equipment or additional Ethernet switches for signal regeneration, micro-sized device streamlines network installation when...

Read More »
Wireless Access Point supports multiple operating modes.
Electronic Bridges

Wireless Access Point supports multiple operating modes.

Acting as 802.11 b/g access point, EKI-6311G allows wireless devices to communicate with each other and 10/100Base-TX Ethernet wired networks. Client bridge operation connects one or more wired devices to wireless network, and wireless repeater functionality combines both formerly mentioned modes to extend wireless coverage areas. Supplied in IP65-rated, weatherproof plastic enclosure,...

Read More »
Wireless Ethernet Bridge transmits through up to 7 walls.
Electronic Bridges

Wireless Ethernet Bridge transmits through up to 7 walls.

DIN-rail-mountable W900-IM long-range wireless Ethernet bridge features 2 x 902-928 MHz radios, in metal housing, that will pair and exchange keys for encryption. Standard antenna enables 935 Kbps data rate and system allows auto or manual selection between 12 available channels. User can set which radio acts as access point and which is subscriber. Suited for Ethernet intercoms, kiosks, PTZ...

Read More »
Electronic Bridges

3G Wireless Bridge adds Internet access to UTM appliances.

WatchGuard 3G Extend(TM) complements and supplements capabilities of WatchGuard X(TM) or WatchGuard Firebox X UTM network security appliances by adding 3G wireless connectivity. Designed for businesses that require high-speed WAN connectivity where hard-wired broadband is not plausible, bridge provides secure, high-speed Internet access that can be used for primary network connectivity, WAN...

Read More »
Electronic Bridges

7I29 Dual H Bridge

The 7I29 is a Dual H bridge driver for two brush type motors or other inductive loads. The 7I29 is rated at 15A continuous at175 VDC per axis. Each bridge on the 7I29 has selectable overcurrent limits of .75 times and 1.5 times rated current. Low on resistance MOSFETs and high performance gate drivers give the 7I29 high efficiency and low dead time to support switching rates up to 100 KHz. Gate...

Read More »
Electronic Bridges

Wireless LAN Products feature WEP encryption and WAP.

Compliant with IEEE 802.11 a/b/g standards and providing stable data transmission, IP-68 rated FWI and FWO series link 2 or more separate networks to create single expanded LAN network. Available in radio modules ranging from 2.3, 2.4, and 5.0 GHz, products support operating modes of access point, point-to-point bridge, point-to-multipoint bridge, wireless client, or repeater. Units are WI-FI...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics