Electronic Boards

Electronic Boards

Multi-Core Processor Blade features up to 32 GB main memory.

Combining two 2.13 GHz quad-core Intel® Xeon® processors and redundant 10 GbE support, ATCA-7350 ATCA blade delivers performance and flexibility required by server-type communications network elements. It supports media servers in IPTV and IP Multimedia Subsystem broadband networks, and features dual hot-swappable and RAID-capable on-board disk drives. PICMG 3.1-compliant fabric...

Read More »
Electronic Boards

ATCA Multi-Core Processor Blade has on-board 10 GbE switch.

With dual Cavium OCTEON(TM) PLUS sixteen-core processors, ATCA-9305 enables network equipment to handle data plane and control plane applications on same hardware. It features RLDRAM for deep packet inspection in telecom networks and PCI Express x4 port lane for design of custom rear transition module with storage. Blade is suited for data plane elements in applications such as 4G/LTE wireless,...

Read More »
Electronic Boards

Digital I/O Boards have PCI Express form factor.

PCIe-DIO24 features 24 channels of digital I/O with selectable 3.3 and 5 V logic levels. High-density PCIe-DIO96H offers 96 channels of 5 V compatible digital I/O with 64 mA sink, 15 mA source capability. Both offer software selectable pull-up and pull-down resistor configurations and ship with TracerDAQ®data logging, viewing, and analysis application; InstaCal(TM) installation,...

Read More »
EPIC Board features AMD Geode(TM) LX processor.
Electronic Boards

EPIC Board features AMD Geode(TM) LX processor.

Supporting onboard AMD Geode(TM) LX800/900 or optional LX700 processor, Model EPIC-5536 offers 200-pin DDR SODIMM and system memory up to 1 Gb for DDR 333 or 512 Mb for DDR 400. It adopts Realtek 8100C 10/100Base-TX chip that deploys two RJ-45 ports or optional RTL8110S gigabit LAN to provide flexible network connections. With power consumption of less than 10 W, unit accommodates 1 IDE, 2 SATA I...

Read More »
Electronic Boards

CompactPCI Module supports mass storage drives.

Communicating with host computer via 3U CompactPCI backplane, TP MS1/x11 SATA300 Controller Board accommodates two 2.5 in. Serial ATA300 mass storage drives plus CompactFlash(TM) site. It can support 33 and 66 MHz signaling speeds and has built-in option for 32- or 64-bit backplanes. Serial ATA interface supports transfer rates up to 300 Mbps per drive. Expansion to three or four SATA300 drives...

Read More »
Electronic Boards

DAQ Board facilitates 16-bit data conversion.

Providing 16 differential isolated analog inputs and 2 isolated analog outputs, Model MSXB 085 isolated analog expansion and termination board can sample signal inputs at 333 k samples/sec and can update both signal outputs at 500 k updates/sec. It fits into backplane in standard industrial enclosure or directly into DAPserver to form networked, isolated instrument. Up to 8 boards can be...

Read More »
Electronic Boards

Z-AXIS Wins Design Contract from Qualitrol for Electrical Utilities Monitoring System

Z-AXIS wins contract to design improved power sub-station monitoring system for Qualitrol Corporation Phelps, NY - Aug. 1, 2008 - Electronics contract manufacturer Z-AXIS (www.zaxis.net) today announced that it has won a contract from Qualitrol Corporation (www.qualitrolcorp.com) of Fairport, NY to design an electronic controller board to be used in Qualitrol Corp.'s monitoring systems for the...

Read More »
Electronic Boards

Interface Boards feature 4 LVDT/RVDT channels.

Available in 2 models for use with PowerDNA Cube and PowerDNR RACKtangle chassis, DNx-AI-254 LVDT/RVDT Boards each feature 4 fully isolated LVDT/RVDT channels with independent A/D converters. Each channel offers 16-bit resolution, 0.1% accuracy, and scan rates up to 500 Hz. Boards can operate as LVDT/RVDT input interface or as simulation output device, on per channel basis. Multiple operating...

Read More »
Electronic Boards

Computing Systems are optimized for data-intensive work.

Available in deskside or rackmount configurations, D Series Quadro Plex® Visual Computing Systems (VCS) deliver parallel processing capabilities using multiple Quadro® graphics cards for visualization, large-scale projection and display, or computation with CUDA(TM) Parallel Computing Processor. Quadro Plex 2200 D2 VCS features 2 Quadro GPUs, 4 dual-link DVI channels, and 8 GB frame...

Read More »
Electronic Boards

USB 2.0 Core Modules address embedded applications.

ExtremeUSB® 2.0 Core 2100 Module daughter boards enable true 480 Mbps USB 2.0 connectivity/extension over distances up to 100 m for Cat5 and up to 10 km for fibre optics. Supporting USB 2.0 and classic 1.1 host controllers without requiring additional software drivers, these SFF embedded modules let users locate USB 2.0 devices remotely from PC Host. Areas of use include embedded medical,...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers