Electronic Boards

PCIe Modules are 1-, 4-lane PMC adapters/carriers.
Electronic Boards

PCIe Modules are 1-, 4-lane PMC adapters/carriers.

Customizable 1-lane PCIeBPMC and 4-lane PCIeBPMCx1 offer matched length, differentially routed, impedance controlled rear IO from Pn4. Model PCIeBPMCX1 (PCIe Bridge PMC 1 slot) adapter/carrier converter provides ability to install one PMC card into standard PCIe 4-lane slot. Products, offering auto selected or switch programmable speeds, are suitable for PCI or PCI-X operation with PMC; 32- or...

Read More »
Electronic Boards

Gate Drive Interface Board is designed for dual IGBT modules.

Model VLA536-01R is gate drive interface board in which control signals are isolated using high-speed optocouplers with 15 kV/-µs common mode noise immunity. It provides 2,500 Vrms isolation for control power and signals, as well as isolated fault feedback signal if short circuit condition is detected. Measuring 101 x 64 mm, board includes CMOS-compatible input interface and mounts to dual NX...

Read More »
Electronic Boards

Analysis/Emulation Card covers OC3/12 and STM1/4.

As dual OC3/12 and STM1/4 PCIe card, LightSpeed 1000 may be used for protocol analysis and emulation of ATM, POS, RAW, and Ethernet traffic. It has 2 GB DDR2 RAM as well as GbE and USB 2.0 interfaces and comes with software for overall monitoring, BERT, emulation, and protocol analysis. Multiple cards can be accommodated in rack PC for simultaneous analysis of 4 or more signals, and all...

Read More »
PCI DAQ Card delivers maximum sampling rate of 20 MS/sec.
Electronic Boards

PCI DAQ Card delivers maximum sampling rate of 20 MS/sec.

Offering 4 parallel channels, with independent 20 MS/sec 12-bit A/D converter and independent programmable gain amplifier for each channel, model A0720002 PCI2712S parallel DAQ card features voltage signal acquisition ranges from 100 mV to 20 V. Sampling depth of each channel is up to 16 MS/sec. DAQ board with all-electronic calibration, is designed for transient signal recording, refined...

Read More »
Mini-ITX Board features discrete onboard graphics.
Electronic Boards

Mini-ITX Board features discrete onboard graphics.

Powered by 1.6 GHz VIA Nano processor coupled with VIA VX800 media system processor and S3 Graphics 435 ULP graphics processor, VIA VB8003 supports up to 4 GB of DDR2 system memory. Onboard I/O includes dual HDMI ports, DVI port, VGA port, and 2 RCA jacks as well as GigE RJ-45 ports, 4 USB 2.0 ports, serial and PS2 ports. Board can power HD content playback across 4 uniquely configured displays,...

Read More »
Electronic Boards

Computer Boards expand communications, power capabilities.

PC/104-sized VL-EPMs-E1 (dual gigabit Ethernet expansion) and VL-EPMs-PS1 (in-stack DC-DC power supply) feature Stackable Unified Module Interconnect Technology (SUMIT(TM)) interface scheme that helps designers add standard and custom expansion boards to their systems. VL-EPMs-E1 features high-speed Ethernet channels and optional wireless functionality via PCIe Mini Card interface, VL-EPMs-PS1...

Read More »
I/O Module offers PC/104 interface for ADLINK SBC.
Electronic Boards

I/O Module offers PC/104 interface for ADLINK SBC.

Ampro by ADLINK MiniModule SIO, designed for Ampro by ADLINK CoreModule-® 730, provides PC/104 interface as well as 4 serial ports, including 2 via DB-9 connectors supporting RS-232/422/485 and 2 via pin headers supporting RS-232. It also includes shared parallel port and floppy pin header, PS/2 mouse and keyboard pin headers, and 2 USB 2.0 ports. Ruggedized SUMIT I/O module measures 90 x 96 mm...

Read More »
PCI-104 Module has isolated digital I/O for embedded systems.
Electronic Boards

PCI-104 Module has isolated digital I/O for embedded systems.

Supporting high-voltage isolation of 2,500 Vdc on each I/O channel, 32-channel digital I/O PCI-104 module Model PCM-3730I resists noise interference and ensures accurate I/O data. PCI-104 interface allows for stacking different modules together in compact system such as embedded computing platform. With input range of 5-30 Vdc, module is suited for applications with 12 or 24 Vdc input voltage. It...

Read More »
Electronic Boards

Display Controller Boards suit medical imaging.

Designed specifically for diagnostic and review stations, eXtended function RAD LPX Series features fanless design and low-profile PCBs with bracket change to fit into small form factor or ATX-style workstation PCs. Boards include 256 MB high-speed memory for image caching and acceleration as well as dual-output, color and/or grayscale support for analog or single link digital displays. RAD PCI...

Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Sponsored

Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber

Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.

Read More »

All Topics