Electronic Boards

I/O Adapter provides eight RS232 ports.
Electronic Boards

I/O Adapter provides eight RS232 ports.

ULTRA COMM+8.LPCI low-profile PCI bus serial I/O adapter connects to PLCs, barcode readers, scales, and other data acquisition/control devices. Designed using XR16C850 UART, adapter supports standard PC data rates and offers top speed of 460.8 Kbps. It provides 128-byte FIFO for error-free operation. Connection to board is made through 68-pin connector. Single fan-out cable provides connection to...

Read More »
Mezzanine Card provides digital and analog I/O.
Electronic Boards

Mezzanine Card provides digital and analog I/O.

Multi-function Model PMC-DAADIO incorporates onboard Motorola DSP56F807 Digital Signal Processor, enabling it to manage external I/O-intensive applications while minimizing demands on processing capability of PMC host. It provides 8 differential analog input channels, as well as 8 single-ended analog outputs, all operating at 12-bit resolution, in addition to 18 TTL digital I/O lines and...

Read More »
Electronic Boards

PowerPC Board offers various I/O and mezzanine options.

Model 4205 on-board Fibre Channel VME Board comes with 600 MHz Motorola PowerPC MPC7455 processor and dual, programmable Xilinx Virtex-II FPGAs. It accommodates up to two VIM-2 modules, one VIM-4 module, or one VIM-2 and one PMC module. I/O capabilities include built-in Ethernet, RS-232, VME64, dual RACE++, and front-panel 1- or 2-Gigabit Fibre Channel interface. Unit is optimized for data...

Read More »
PCI Card combines high speed with convenient wiring.
Electronic Boards

PCI Card combines high speed with convenient wiring.

Model COMR 8232J, serial communications card, with 8 RJ-12 telephone ports, provides data rates up to 921.6 kbaud on each. Model COMR 8232P adds surge suppression at data rates up to 115.2 kbaud, enabling each line to sustain 40 A peak, eight 20 Â-µsec transient surges, 30 V clamping voltage, and 0.1 J peak energy dissipation. All 8 channels are addressed in continuous 64-byte I/O block for...

Read More »
Module provides full monitoring capabilities.
Electronic Boards

Module provides full monitoring capabilities.

System Management Module is a programmable, stand-alone, intelligent monitoring board. It monitors voltages, temperatures, current, and fan speed and reports present status and alarm conditions via RS-232, Ethernet, and IÂ-²C communications links. Base unit monitors up to 8 points for over- and under-voltage, up to 4 fans, up to 3 temperature sensors, and DC OK/AC OK inputs. Outputs include 1...

Read More »
Adapter allows multi-interface PC/104 serial communications.
Electronic Boards

Adapter allows multi-interface PC/104 serial communications.

Model SIO.104+2 dual port, serial communications adapter provides two RS-232/422/485 ports, allowing field-selectable connection to real-world devices. Each port can be individually configured and offers automatic control of RTS signal when using RS-485 mode. Adapter uses XR16C850 UART, which supports standard PC data rates with top speed of 460.8 Kbps. It provides 128 byte FIFO, allowing...

Read More »
I/O Board supports synchronous/asynchronous protocols.
Electronic Boards

I/O Board supports synchronous/asynchronous protocols.

Model PMC-SIO octal serial I/O PCI mezzanine card offers 8 ports with Enhanced Serial Communication Controller and quad Universal Asynchronous Receiver Transmitter equipped with EIA-232 or EIA-422/485 interfaces. PMC to PCI interface uses 33 MHz, 32-bit PLX PCI9030, with 3.3 or 5 V signaling and configuration serial EEPROM. PMC-SIO provides both front and rear I/O and is available for...

Read More »
Graphics Accelerator delivers up to 4 times the speed.
Electronic Boards

Graphics Accelerator delivers up to 4 times the speed.

Entry-level PCI Mezzanine Card (PMC) graphics board for 2D, 3D, OpenGL, and DirectX-compatible displays, supports Windows, VxWorks, and Linux operating systems. Powered by 128 bit SM731 graphics accelerator, card supports screen resolutions up to 1600 x 1200. It can be configured with 16 or 32 Mbytes of high speed SDRAM display memory for local storage of image and off-screen data such as texture...

Read More »
I/O Card detects change of state.
Electronic Boards

I/O Card detects change of state.

Plug-and-play PCI-IDIO-16 I/O PCI utility card provides 16 opto-isolated digital inputs and 16 solid-state FET outputs. Isolated FET outputs, for switching DC signals, are in 3 groups: one group of 8 with complete isolation, and 2 groups of 4 sharing common ground. Input signals are rectified by diode bridge, while constant-current circuit ensures consistent operation. Card is set up via software...

Read More »
Data Acquisition Board performs simultaneous sampling.
Electronic Boards

Data Acquisition Board performs simultaneous sampling.

Model DAP(TM) 5400a/627 Data Acquisition Processor(TM) has 128 Mbyte data buffer and can acquire 2 million 14-bit resolution samples/sec simultaneously on 4 of its 16 channels. DAPL(TM) 2000 operating system allows real-time work under WindowsÂ-® XP/2000/NT/ME/95/98 and offers user interface in Visual BasicÂ-®, LabVIEWÂ-®, or other software, free from PC-related delays. Real-time...

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics