Digital Output Boards expand Cube and chassis capacity.
Along with 32 channels of digital output, Guardian DNA/DNR-DIO-432 and -433 offer up to 600 mA per-channel continuous current with output voltage drop of less than 550 mV. DNA models are designed for use with Ethernet Cube products, and DNR models are designed for 12-slot rack-mounted RACKtangle(TM) I/O chassis. Respectively, outputs for -432 and -433 versions are configured as current sources...
Read More »Graphics Mezzanine Card offers portable computing solutions.
Intended for military and civilian applications, Sentiris 5140 XMC mezzanine card meets shock, vibration, temperature, and other requirements of MIL-STD-810F, making it suitable for harsh and demanding environmental conditions. Unit is built by using ATI Radeon(TM) HD 3650 Graphics Processing Unit, and uses power-management technologies to reduce power consumption and heat dissipation. It is...
Read More »Graphics Mezzanine Card offers portable computing solutions.
Intended for military and civilian applications, Sentiris 5140 XMC mezzanine card meets shock, vibration, temperature, and other requirements of MIL-STD-810F, making it suitable for harsh and demanding environmental conditions. Unit is built by using ATI Radeon(TM) HD 3650 Graphics Processing Unit, and uses power-management technologies to reduce power consumption and heat dissipation. It is...
Read More »T3 WAN PMC Adapter terminates up to 672 HDLC channels.
Conforming to PCI Local Bus 2.1 specification, Model wanPMC-C1T3 transfers 64 or 32 bits of data up to 66 MHz, enabling advanced voice and data applications, such as VoIP, video on-demand, voice conferencing, and Internet routing. Adapter provides M13 multiplexer, 28 T1/E1 framers, signal conditioning, B3ZS transmit encoding and receive decoding, as well as local and remote loop back capability....
Read More »
How to Choose the Right Label for Your Application
This ebook discusses factors to consider when choosing the optimal label for your application.
Read More »T3 WAN PMC Adapter terminates up to 672 HDLC channels.
Conforming to PCI Local Bus 2.1 specification, Model wanPMC-C1T3 transfers 64 or 32 bits of data up to 66 MHz, enabling advanced voice and data applications, such as VoIP, video on-demand, voice conferencing, and Internet routing. Adapter provides M13 multiplexer, 28 T1/E1 framers, signal conditioning, B3ZS transmit encoding and receive decoding, as well as local and remote loop back capability....
Read More »
XTX Module offers rich I/O and expansion features.
Compatible with ETX Rev 2.7, but not for pin definition of X2 connector, XTX-915 implements serial technologies into X2 connector that bundles SATA and PCI-Express to replace ISA interface on ETX module. Module is equipped with Intel-® Socket 478-based Pentium® M/Celeron® M processors and 200-pin DDR II 400/533 SODIMM. It supports CRT/LCD simultaneous/dual view displays and accommodates 4...
Read More »
XTX Module offers rich I/O and expansion features.
Compatible with ETX Rev 2.7, but not for pin definition of X2 connector, XTX-915 implements serial technologies into X2 connector that bundles SATA and PCI-Express to replace ISA interface on ETX module. Module is equipped with IntelÃ-® Socket 478-based Pentiumî M/Celeronî M processors and 200-pin DDR II 400/533 SODIMM. It supports CRT/LCD simultaneous/dual view displays and...
Read More »FPGA Mezzanine Card is based on VITA 57.1 standard.
Available in air- and conduction-cooled rugged versions, Model ADC510 integrates two 500 MHz ADC devices, each supporting sampling rate up to 500 MSps and providing 12-bits of digital output. ADC device interfaces are routed to FMC connector to enable FPGA on baseboard to directly control and receive data. Choice of sample clock sources include onboard source that supports sampling rates of 300,...
Read More »FPGA Mezzanine Card is based on VITA 57.1 standard.
Available in air- and conduction-cooled rugged versions, Model ADC510 integrates two 500 MHz ADC devices, each supporting sampling rate up to 500 MSps and providing 12-bits of digital output. ADC device interfaces are routed to FMC connector to enable FPGA on baseboard to directly control and receive data. Choice of sample clock sources include onboard source that supports sampling rates of 300,...
Read More »
Interface Board links PMT sensors to DAQ systems.
Board model SIB064 provides mechanical interface and electrical connectivity between Hamamatsu H8500D, a 64-element multianode photomultiplier tube, and multichannel DAQ system. High bandwidth preamplier connects directly to H8500D last dynode and provides its amplified output to one of 3 on-board pulse discriminators - leading edge, constant fraction, zero slope - to directly trigger DAQ...
Read More »
Locon Sensors Withstand Extreme Temperatures
Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.
Read More »
