Electronic Boards

DAQ Boards offer integrated signal conditioning.
Electronic Boards

DAQ Boards offer integrated signal conditioning.

SC Series boards, including PXI-4204 and PXI-4220 modules, seamlessly integrate with LabVIEW 7 Express for acquiring and analyzing high-voltage and high-speed strain with 16-bit measurement accuracy. Devices integrate measurement-specific signal conditioning onto 16-bit PXI data acquisition module based on cPCI bus and provide simultaneous sampling at rates up to 200 kS/s. Products allow users to...

Read More »
Data Acquisition Boards offer GPS time stamping.
Electronic Boards

Data Acquisition Boards offer GPS time stamping.

Model PAR4CH consists of one 4-channel, 24 bit, A/D system that employs converter per channel architecture. Dedicated A/D chip for each channel eliminates crosstalk and settling problems. Able to connect to PC parallel port, unit includes 2 MB memory buffer and offers continuous, user-programmable acquisition rates from 0.1-5,000 Hz. Timing module PARGPS connects to PAR4CH and PC, providing 10...

Read More »
Electronic Boards

Digital I/O Card expands available I/O in SBCs.

Suited for use with company's SBCs (BL2500) and operator interfaces (OP7200), RN1100 RabbitNet I/O expansion mechanism is based on 3-wire, full duplex technology. Product utilizes off-the-shelf Ethernet cables, transmitting data at rates to 1 Mbit/sec over maximum recommended distance of 33 ft. Mounted on 100 mm DIN rail tray, unit features I/O set consisting of 24 inputs and 16 sink/source...

Read More »
Electronic Boards

CompactPCI Card has 3U height.

RocketPort® CompactPCI (cPCI) serial card employs Kontron CP302 Intel® Mobile Pentium III processor based CPU board and CP-ASM-4 cPCI chassis. Product provides up to 16 RS-232 or RS-422 connections from single cPCI expansion slot. It conforms to PICMG 2.0 Revision 3.0 specification for cPCI expansion cards within PCI industrial computers.

Read More »
Digital I/O Card extends uses of embedded control systems.
Electronic Boards

Digital I/O Card extends uses of embedded control systems.

DIN-rail mountable RabbitNet(TM) RN1100 peripheral I/O card has friction-lock connectors and expansion ports that enable modular and expandable embedded control system to be adapted for various applications. Typical RabbitNet system consists of master SBC and one or more peripheral I/O cards. Programs are developed and debugged using Dynamic C® software, which runs on Windows PC. Features...

Read More »
PC/104 Module offers digital and analog I/O.
Electronic Boards

PC/104 Module offers digital and analog I/O.

Designed with Maxim MAX197 successive approximation-type A/D chip, AIO-104+8 provides 8 single-ended, 12-bit inputs. Unit also includes two 12-bit D/A output channels and 16 TTL digital I/O bits, which can be individually programmed as input or output. Suited for PC/104-based data acquisition/control and test/measurement applications, unit's A/D inputs are software selectable for 0-5, 0-10,...

Read More »
PCI Mezzanine Card suits harsh environment displays.
Electronic Boards

PCI Mezzanine Card suits harsh environment displays.

Based on Asiliant Technologies' 69030 HiQVideo(TM) Accelerator, PMC-DGX multi-featured graphics acceleration PCI Mezzanine Card drives SXGA displays in harsh environment console applications. Product has dual independent display capability that accommodates legacy analog CRT and DVI compliant digital video input, flat-panel displays. Unit provides graphics performance of 1600 x 1200 64 K color at...

Read More »
PC/104 Card is Navigator®-based
Electronic Boards

PC/104 Card is Navigator®-based

Navigator®-PC/104, offered in 1-, 2-, and 4-axis versions, is suited for DC brushed, brushless DC, and step motors. Designed in surface mount CMOS technology, product provides dedicated motion control features such as trajectory generation, servo loop closure, quadrature signal input, motor output signal generation, trace, and on-the-fly changes. Unit offers servo loop rate of 100...

Read More »
Serial I/O Card boasts top speed of 921.6 Kbps.
Electronic Boards

Serial I/O Card boasts top speed of 921.6 Kbps.

Model C4-104.ULTRA multi-interface, PC/104 serial I/O card allows user to select desired interface via software. RS-232, RS-422, or RS-485 modes may be selected independently for each of 4 ports. Board uses XR16C864 UART, which provides 128-byte FIFO. In RS-485 mode, C4-104.ULTRA offers automatic control of RS-485 driver enable for trouble-free network master arbitration. RS-485 network...

Read More »
PC-104 Boards operate over -40 to +85°C temperature range.
Electronic Boards

PC-104 Boards operate over -40 to +85°C temperature range.

Models 104-COM-8S (8-port) and 104-COM-4S (4-port) asynchronous, serial communication boards support RS-485 and RS-422 communications. Ports are accessed via 50-pin IDC type right angle connectors. Auto-RTS feature enables half-duplex RS-485 communications in Windows-based applications. Type 16550 UARTS are used, and type 16850 UARTS, with 128 bytes of transmit and receive FIFO, are optional....

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics