Ethernet Device Servers are suited for industrial use.
Models SSE-400D and DSE-400D are equipped with one and two serial ports, respectively, that can be software-configured for RS-232/422/485 operation on all available ports. Both feature IP multicasting mode and PowerPC processor from Freescale. Housed in steel enclosures, products receive clean dc power through provided power supply, even when ac on factory floor is less than perfect.
Read More »Bus Extension System allows remote operation of equipment.
PCI Bus Extension System uses high-speed serial transmission and PCI bridge to enable PCI boards to be used at up to 12 m from PC. PCI slot expansion units can extend PCI bus using Cat-5 cable and provides fully compatible PCI bus bridge with transmission over 5 Gbps full duplex link. Applications include areas such as semiconductor manufacturing equipment, robotics and motor control, high-speed...
Read More »
Embedded Module features Intel i815E chipset.
Model ETX-P3T provides complete PC functionality in component that plugs into application-specific carrier board. Power management is achieved using ACPI and APM 1.2, allowing fanless cooling. Module supports Intel 82815 chipset with integrated Graphics Core, 2 IDE ports with support for ATA 33, 4 USB 2.0 ports, up to 512 Mbytes SDRAM, 10/100 Mbit Base-T Ethernet, LVDS up to SXGA 1,280 x 1,024,...
Read More »
Motion Control Cards feature max pulse output of 4 Mpps.
Models PCI-1241/1242/1261 provide 4- and 6-axis of servo and stepper motor control. They support 2D and 3D interpolation for linear, circular, and arc motion, as well as T- and S-curve acceleration. All 3 cards provide precise position and rotation control, as each axis is equipped with 32-bit logical position counter that counts axis pulse output number; and 32-bit real position counter that...
Read More »
Retem System: Breakthrough Technology in Soil Stabilization & Erosion Control
This white paper provides an overview of Retem Systems breakthrough technology.
Read More »
PCI DI/DO Cards offer 128 digital input/output channels.
Models PCI-1758UDI and PCI-1758UDO are digital input/output cards with universal PCI bus, BoardID(TM) switch, and high-voltage isolation. PCI-1758UDI has interrupt function for each of 128 digital input channels and digital filter function, which provides de-bouncing for switches and relays. PCI-1758UDO features watchdog timer and user-configurable power-up states. Both cards support systems with...
Read More »
Serial Communication Modules have 8 asynchronous ports.
Models PMC520 (octal 232) and PMC521 (octal 422/485) provide 8 asynchronous serial communication ports from a single PMC carrier slot. Each port is equipped with 64 byte transmit and receive FIFO buffers that minimize CPU interactions, and Baud rate is programmable with data rates of up to 250 Kbps. RTS and CTS handshake support are provided for interface with modems. Other functions include...
Read More »
Dual Type III Mini-PCI Adapter works with PC/104-PLUS bus.
Model 4167 allows use of 2 mini-PCI cards, such as IEEE 802.11 wireless LAN cards, in PC/104-PLUS (PCI-only) system. It uses PCI bus bridge, so only one PC/104-PLUS slot is required. PCI bridge also isolates mini-PCI cards from system, allowing mini-PCI cards to be used in systems with 5 V busses. On-card jumpers are used to select which PC104-PLUS slot the adapter occupies, and status LEDs are...
Read More »
Telecom Blade has 1 GHz processor and PICMG 2.16 interface.
Katana(TM)752i is equipped with PowerPC-® 750GX processor and Marvell Discovery III system controller. Configurable cPSB blade features 2 PTMC sites, 4 Gigabit Ethernet channels, multi-level cache, and CTBus/H.110 interconnect that enables product to acquire and process both TDM and packet data. PTMC sites support 32-bit PCI data transfers at 33 or 66 MHz and feature dedicated CTBus and RMII...
Read More »
Microcontroller Board features radio link.
Model WMB-USA uses Atmega8535-16 chip, running at 16 MHz and achieving almost 16 MIPS. Built-in serial RF link has variable power from 1-10 mW with selectable data speeds. Suited for wireless control, mobile robots, and data-logging applications, board accepts input voltage from 6-35 V with polarity inversion protection, and includes four 8-bit I/O ports and one serial port. It measures 84 x 70 x...
Read More »
Image Acquisition Board is compliant with 64-bit PCI bus.
Model X64-LVDS is compatible with 8, 10, and 12-bit LVDS and RS-422 digital area or linescan cameras and supports up to 8 taps of 8 bits each. On-the-fly tap correction expedites image processing and analysis. Featuring image acquisition rates up to 600 Mb/s and image transfer to host memory at 528 Mb/s, Model X64-LVDS provides up to 32 Mb of local buffer memory. It supports fixed and variable...
Read More »
Simple Connection – MGB with EtherNet/IP
The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.
Read More »
