Electronic Boards

Electronic Boards

Data Acquisition/Processing Board has 2 GHz sampling rate.

Capable of single- or 2-channel data acquisition, Model 6826 VME A/D converter board utilizes 10-bit Atmel AT84AS008 ADCs and configurable Xilinx Virtex-II Pro FPGA with 11 million gates. It accepts single-ended or differential inputs and digitizes signal bandwidths to 900 MHz. Along with two 64-bit DDR SDRAMs that provide up to 1 Gb of memory, unit features 16 Mb Flash memory, multiple I/O...

Read More »
Electronic Boards

PCI Mezzanine Card features FPGA-configurable I/O.

COTS-based Model PIO-PMC1 combines multiple I/O functions on one PMC capable of meeting multiple functions within single slot. Conduction-cooled card can withstand environments where extreme shock, vibration, and temperatures are present. Through FPGA, unit can be configured with several different serial and discrete options. Up to 8 serial RS-422/485 RX/TX pairs, 16 analog TTL inputs and...

Read More »
PC/104 Module targets global positioning applications.
Electronic Boards

PC/104 Module targets global positioning applications.

OrbiTrak(TM) GSM combines wireless tri-band GSM/GPRS connectivity with 12-channel parallel-tracking GPS receiver in single, integrated embedded board. Supporting full interrupt-sharing for all serial ports, board includes 4-channel 16C550 UART with 2 RS-232 serial ports for other devices. A 16-bit wide programmable digital I/O is provided to interface with low-power digital devices, along with 2...

Read More »
Electronic Boards

AdvancedTCA Module addresses 10 Gbps applications.

Based on dual Intel IXP28xx network processors with 1.4 GHz core and 700 MHz Xscale(TM), Promentum(TM) ATCA-7010 can be configured as single, dual, parallel, or pipelined. Ten 1 gigabit Ethernet interfaces that connect via rear transition module enable 10 Gbps packet processing. Model ATCA-7010 supports PICMG 3.0 and PICMG 3.x through modular fabric interface card. It includes 3 banks of 256 Mb...

Read More »
Interface simplifies communication in power control.
Electronic Boards

Interface simplifies communication in power control.

Measuring 1.7 x 3.0 in., FlexBus(TM) Interface Board FCIF010 provides multi-drop serial interface for power control and automation. Electrically isolated data bus eliminates line drops and ground noise from measurements, protects PC from power transients, and enables operation at varying voltages. Also included, 6-byte ASCII command strings enable real-time interrupt-driven control and DAQ. Board...

Read More »
CompactPCI Module allows data rates up to 100 Mbit/s.
Electronic Boards

CompactPCI Module allows data rates up to 100 Mbit/s.

Based on LAN Controller 82551ER, CLAN7 3U CompactPCI Module provides Ethernet/Fast Ethernet interface according to IEEE 802.3. In addition to 8-pin RJ45 socket, front panel features 4-pin M12 socket according to Industrial Ethernet Standard of IAONA organization. Four LEDs provide information about operating state of 4 HP module as well as quality of LAN connection. Network is electrically...

Read More »
I/O Board provides secure front panel connections.
Electronic Boards

I/O Board provides secure front panel connections.

Model AVME9668 non-intelligent slave board interfaces IP modules to VMEbus. The 6U board holds 4 IP modules. Field I/O connections are made through front panel of carrier board. To accommodate rugged, high-performance applications, front-panel SCSI-2 connectors provide screw-down or spring latch connections that hold cables securely. With support for 8 and 32 MHz clocks, data can be processed at...

Read More »
Analog I/O Board works in space-limited applications.
Electronic Boards

Analog I/O Board works in space-limited applications.

Suited for PC-based measurement, analysis, monitoring, and control, LPCI-A16-16A features dual 12-bit analog outputs, 16 digital I/O lines, and three 16-bit counter/timers. Board provides 500 kHz sampling rate with 16-bit resolution for 16 single-ended or 8 differential analog input channels while meeting MD2 Low Profile PCI Bus Specification. It also offers channel-by-channel programmable gain,...

Read More »
Electronic Boards

DAQ System provides alternative to PCI-based versions.

Measurement Advantage(TM) USB-PDISO8 expands PC capabilities by providing 8 isolated ac or dc inputs and 8 electromechanical relays in one system with USB expansion port. Inputs monitor 24 Vac or Vdc inputs, while output relays provide 6 A, Form C, SPDT outputs @ 120 Vac or 28 Vdc. Screw terminals facilitate field wiring to I/O. External power supply and USB cable are included. In addition to...

Read More »
ATCA Node Blade is available with MontaVista Linux CGE.
Electronic Boards

ATCA Node Blade is available with MontaVista Linux CGE.

Node Board ATC4130 offers MontaVista Linux Carrier Grade Edition (CGE) support, making it suited for telcom and data communications products that require high availability, fault management, and real-time performance. Featuring 2.4 GHz Xeon processor, PICMG 3.1-compliant, packet-switched processor blade uses E7501 server-class chipset with 400 MHz FSB and offers 2 on-board 10/100/1,000 Mbits/sec...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers