Electronic Boards

Host Interface Board uses x4 standard cable connectors.
Electronic Boards

Host Interface Board uses x4 standard cable connectors.

Max Express(TM) PCIe Host Interface Board utilizes x4 PCI-SIG cable to link board to expansion system, supporting speeds to 20 Gigabits/s. Board supports downstream link in non-transparent mode to second host system, allowing host-to-host communications with up to two 20 Gbps links for total bandwidth of 40 Gbps. Max Express PCIe Cable Bus Expansion System extends PCIe bus of host system to...

Read More »
Electronic Boards

Graphics Adapter improves ThinkCentre image quality.

Featuring 2,048 x 1,536 resolution, 128 Mb ATI RADEON X700 VGA, TV-Out PCI-e Dual Head ThinkCentre Graphics Adapter integrates dual integrated display controllers, dual integrated 400 MHz DACs, and 165 MHz TMDS transmitter. Along with PCI Express x16 lane support, it offers VGA and DVI-I monitor connection. Adapter meets demands of graphic-intensive software for desktop publishing, animation, and...

Read More »
Telecom Infrastructure Products use PowerPC® processors.
Electronic Boards

Telecom Infrastructure Products use PowerPC® processors.

KatanaQp ATCA blade combines MPC7448 processor pair with 4 PTMC expansion sites, redundant IPMI-based system management interfaces, and PICMG 3.1-compliant ATCA interface. Processors, running at speeds to 1.7 GHz each, can be used for distributed or symmetric multiprocessing. Single-processor PmPPC7448 ProcessorPMC mezzanine card combines offers up to 2 GB RAM, 64 MB flash, and 3 Ethernet ports....

Read More »
Electronic Boards

Interface Module facilitates DAQ system communication.

Computer interface Model CP22 complements MGCplus multi-channel data acquisition system by allowing rapid communication from sensors. In addition to RS232 serial link, unit includes TCP/IP, 10/100 Mbit Ethernet interface, which allows transmission of over 150,000 measured values/sec, across 64 channels, each operating at 2.4 kHz sample rate. USB 1.1 interface enables transmission of more than...

Read More »
Mezzanine Cards provide graphics control.
Electronic Boards

Mezzanine Cards provide graphics control.

Models P18 PCoMIP and P518 offer graphics functionality in on-board Altera Cyclone FPGA. Both feature 16 Mb of frame buffer connected to FPGA via 133 MHz, 16- or 32-bit data bus. Analog and DVI digital video outputs are provided as well as LVDS interface for TFT displays. On-board FPGAs act as 32-bit PCI targets for either 33 or 66 MHz PCI buses. Video compression, bit-blitter, rendering, pattern...

Read More »
I/O and Processor Modules target telecom manufacturers.
Electronic Boards

I/O and Processor Modules target telecom manufacturers.

Telum(TM) AdvancedMC(TM) Modules provide telecom equipment manufacturers with range of options for creating carrier grade network applications featuring Intel® Pentium® M processors. Model PCIE-AMC-7S Chassis allows PCI-Express-based workstations or servers to control backplane populated with hot swappable AdvancedMC modules plugged directly into backplane. Standalone 2U 19 in....

Read More »
Electronic Boards

Expansion Card offers storage traffic only function.

Expansion Card iSCSI is a hardware initiator that provides iSCSI communications from blade servers HS20, HS40, JS20, and LS20 to iSCSI storage device. Dual port card utilizes QLogic QMC4052 to enable iSCSI connectivity through switch module bays 3 and 4 and is NEBS-compliant for use in NGN/Telco environments. Blades run diskless in non-Fibre Channel SAN environment.

Read More »
Electronic Boards

DSP Development Kit leverages FPGA devices.

Based on Stratix II EP2S180 FPGA, DSP Development Kit provides platform for developing FPGA-based DSP applications as well as ASIC and structured ASIC design prototypes. It includes DSP development board, Quartus® II software v5.0, DSP Builder v5.0, DSP system reference designs, and evaluation version of MathWorks' MATLAB/Simulink software update. DSP Builder allows engineers to create...

Read More »
Embedded Development System offers 6 Gigabit Ethernet ports.
Electronic Boards

Embedded Development System offers 6 Gigabit Ethernet ports.

Featuring Pentium 4 processor and two 10/100 Ethernet ports, rack-mountable 1U Model PL-01024 supports PCI-X, Mini-PCI, digital I/O, console RJ-45 connector, and USB 1.1 port. It includes programmable LCD interface with 4-button keypad, up to 4 GB DDR RAM, and front panel LEDs for Ethernet status. Bootable CompactFlash socket is available, as well as 2.5 in. HDD bay, SATA, and RAID. Applications...

Read More »
Electronic Boards

Library provides speech compression/decompression.

Designed for 16-bit dsPIC® Digital Signal Controllers, dsPIC30F Speech Encoding/Decoding Library is based on Speex open source compression format, and achieves 16:1 compression ratio and toll quality speech. Encoder samples data at 8 kHz, using DSC's on-chip 12-bit ADC or 16-bit input obtained from external CODEC, and generates fixed 8 kbps output rate. Applications include voice over IP,...

Read More »

All Topics