Programmable Attenuators cover 1 MHz to 6 GHz frequency range.
Measuring 2 x 3 x 0.6 in., RCDAT SeriesÂ- offers both USB and Ethernet control ports, while RUDAT Series, measuring 2.5 x 3 x 0.85 in., comes with USB and RS232 control ports. Both pocket-sized series provide attenuation range from 0–30, 0–60, or 0–90 dB with 0.25 dB step size, high-speed attenuation switching of 650 ns, and accuracy as good as ±0.3 dB. With GUI software,...
Read More »Coaxial Fixed Attenuators range from DC to 40 GHz.
Rated at 2 Watts, BW Series offers attenuation levels from 3–20 dB with flatness of ±1.0 dB or better across entire frequency range. Precision attenuators provide matching to 50 Ω with 1.2:1 typical VSWR. Equipped with passivated stainless steel 2.9 mm connectors, devices are suited for variety of applications including matching, instrumentation, and test setups.
Read More »Benchtop Optical Variable Attenuator has multiport design.
Able to be remotely controlled via USB or Ethernet,Â- FVA-3800 enables BER testing and system verification in laboratory or manufacturing environments. System has front panel control and integrated power meter, houses up to 4 attenuators, and handles range of applications, including system loss emulation, coherent transmission, as well as transceiver design and...
Read More »
Digital Attenuators offer programmable attenuation to 120 dB.
Featuring input power up to 2 W, Model LDA-102E offers frequency coverage of .1–1,000 MHz,Â- while Model LDA- 602E ranges from 400–6,000 MHz. Both units are powered and controlled by connection to PC or self-powered USB hub, and are programmable for fixed attenuation or swept attenuation ramps directly from included GUI software. In addition to ATE applications, attenuators are suited...
Read More »
The Next Wave of Intelligent Design Automation
In the amount of time it takes to set up a meeting to discuss just one design, engineers can now explore designs exponentially. Generative design has catalyzed a paradigm shift in product development. This shift not only drastically decreases the time it takes to design a product. It also opens the door to design options that might never have been imagined by engineers on their own.
Read More »
VAUNIX LDA-602 Digital Attenuator Voted Top Ten Test and Measurement Product
VAUNIX USB Controlled Lab Brick LDA-602 Digital Step Attenuator up to 6 GHz Voted Top Ten Test and Measurement Product by EverythingRF.com The LDA-602 Lab Brick® Digital Attenuator with sma female connectors is a 50 Ohm RF step attenuator with calibrated operation up to 6 GHz. This unit connects to a USB port for control and power and requires no additional DC supply voltage. It is easily...
Read More »Miniature Surface Mount Attenuators operate up to 18 GHz.
Housed in 2 x 2 mm package, YAT Series is available in 1 dB increments from 0–10 dB, and with as much as 30 dB attenuation. Fixed surface mount units can handle up to 2 W while still effectively dissipating any heat generated from RF/microwave power. Operating from -40 to +85°C with 50 Ω impedance, RoHS-compliant devices serveÂ- commercial, industrial, and military applications,...
Read More »Handheld Optical Variable Attenuator has rugged, portable design.
Intended for fiber link certification, routine maintenance, and labs, model C0270001 can be used with typ 9/125 single mode fibers for continuously variable optical signal attenuation. It combines functions of attenuator and optical power meter and lets user set output power level. Featuring on line attenuation in 0.05 dB steps, product offers FC and PC interchangeable connectors. Attenuating...
Read More »
IEC Power Inlet, Line Filter delivers optimal attenuation.
Designed for currents up to 15 A, 5123 series offers attenuation and dimensionsÂ- that meet demands for interference suppression in IT, medical, test and measurement, as well as industrial equipment. Combination power entry module integrates EMC filter directly at line input, providing optimal effect on electromagnetic compatibility, while broad metal flange optimizes contact...
Read More »
Vaunix to Demo Several New USB Lab Bricks at IMS
Haverhill, MA - At IMS booth #1129 in Montreal, Canada, Vaunix Technology Corporation, a manufacturer of USB controlled and powered test equipment, will be offering demos of their new LSW Series Switches and new models in their family of LDA Series Digital Attenuators. The switch line is a new Lab Brick product family offering 10 W power handling capability and reliable, high isolation, low power...
Read More »
Frequency Translator/Jitter Filter translates inputs between 8-250 MHz.
SFX-525G frequency translator and 20 Hz jitter attenuator translates an input between 8 kHz to 100 MHz to output frequencies between 8-250 MHz. It provides jitter filtered, wander following output signal synchronization to superior GPS, Stratum or peer input reference signal and supports FEC rates such as 15/14 and 255/237. IC is designed for use in line and service termination cards to provide...
Read More »
Vector® Sports Training Ball Offers Visible Point of Contact
Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector® Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector® is helping ballplayers everywhere, see our video.
Read More »
