Electronic Attenuators

Electronic Components & Devices

Coaxial Fixed Attenuators range from DC to 40 GHz.

Rated at 2 Watts, BW Series offers attenuation levels from 3–20 dB with flatness of ±1.0 dB or better across entire frequency range. Precision attenuators provide matching to 50 Ω with 1.2:1 typical VSWR. Equipped with passivated stainless steel 2.9 mm connectors, devices are suited for variety of applications including matching, instrumentation, and test setups.

Read More »
Electronic Components & Devices

Benchtop Optical Variable Attenuator has multiport design.

Able to be remotely controlled via USB or Ethernet, FVA-3800 enables BER testing and system verification in laboratory or manufacturing environments. System has front panel control and integrated power meter, houses up to 4 attenuators, and handles range of applications, including system loss emulation, coherent transmission, as well as transceiver design and testing. Density, settling time,...

Read More »
Digital Attenuators offer programmable attenuation to 120 dB.
Electronic Components & Devices

Digital Attenuators offer programmable attenuation to 120 dB.

Featuring input power up to 2 W, Model LDA-102E offers frequency coverage of .1–1,000 MHz, while Model LDA- 602E ranges from 400–6,000 MHz. Both units are powered and controlled by connection to PC or self-powered USB hub, and are programmable for fixed attenuation or swept attenuation ramps directly from included GUI software. In addition to ATE applications, attenuators are suited for...

Read More »

VAUNIX LDA-602 Digital Attenuator Voted Top Ten Test and Measurement Product
Electronic Components & Devices

VAUNIX LDA-602 Digital Attenuator Voted Top Ten Test and Measurement Product

VAUNIX USB Controlled Lab Brick LDA-602 Digital Step Attenuator up to 6 GHz Voted Top Ten Test and Measurement Product by EverythingRF.com The LDA-602 Lab Brick® Digital Attenuator with sma female connectors is a 50 Ohm RF step attenuator with calibrated operation up to 6 GHz. This unit connects to a USB port for control and power and requires no additional DC supply voltage. It is easily...

Read More »
Ten Ways to Control Aluminum Costs
Sponsored

Ten Ways to Control Aluminum Costs

All job shops want to save money, and one of the most lucrative ways to do this is by learning how to control the costs of materials such as aluminum. An analysis of your material usage as well as how much you end up scrapping can reveal a goldmine of savings. In this white paper, you will learn ten ways in which you can capitalize on these hidden reserves. From understanding scraps in a more mathematical way to accomplishing jobs with a lean manufacturing approach, this list will provide you with the necessary tools you need to assist you in your financial analysis of your shop’s material consumption. This paper also features real world case studies to illustrate how the right attitude towards material costs can affect real change in terms of money, time, and efficiency.

Read More »
Electronic Components & Devices

Miniature Surface Mount Attenuators operate up to 18 GHz.

Housed in 2 x 2 mm package, YAT Series is available in 1 dB increments from 0–10 dB, and with as much as 30 dB attenuation. Fixed surface mount units can handle up to 2 W while still effectively dissipating any heat generated from RF/microwave power. Operating from -40 to +85°C with 50 Ω impedance, RoHS-compliant devices serve commercial, industrial, and military applications, including...

Read More »
Electronic Components & Devices

Handheld Optical Variable Attenuator has rugged, portable design.

Intended for fiber link certification, routine maintenance, and labs, model C0270001 can be used with typ 9/125 single mode fibers for continuously variable optical signal attenuation. It combines functions of attenuator and optical power meter and lets user set output power level. Featuring on line attenuation in 0.05 dB steps, product offers FC and PC interchangeable connectors. Attenuating...

Read More »

Vaunix to Demo Several New USB Lab Bricks at IMS
Electrical Equipment & Systems

Vaunix to Demo Several New USB Lab Bricks at IMS

Haverhill, MA - At IMS booth #1129 in Montreal, Canada, Vaunix Technology Corporation, a manufacturer of USB controlled and powered test equipment, will be offering demos of their new LSW Series Switches and new models in their family of LDA Series Digital Attenuators. The switch line is a new Lab Brick product family offering 10 W power handling capability and reliable, high isolation, low power...

Read More »
Frequency Translator/Jitter Filter translates inputs between 8-250 MHz.
Electrical Equipment & Systems

Frequency Translator/Jitter Filter translates inputs between 8-250 MHz.

SFX-525G frequency translator and 20 Hz jitter attenuator translates an input between 8 kHz to 100 MHz to output frequencies between 8-250 MHz. It provides jitter filtered, wander following output signal synchronization to superior GPS, Stratum or peer input reference signal and supports FEC rates such as 15/14 and 255/237. IC is designed for use in line and service termination cards to provide...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics