Electronic Amplifiers

Electronic Amplifiers

Fiber Optic Amplifiers feature dual digital displays.

Model D2RF series amplifiers feature programming format offering 6 teaching modes including auto teach, zone teaching, and glass teaching mode. They include 2 x 4-digit displays for verification of light received level and threshold level, which also aid in setup and programming of devices. Equipped with selectable one-shot, off-delay, and on-delay timers, units are available in 2 output...

Read More »
Electronic Amplifiers

Op-Amps eliminates EMI-induced errors in analog systems.

Featuring EMI rejection ratio of 120 dB, PowerWise® LMV83x series integrates EMI filters and maintains accuracy of analog systems by reducing effects of RFI. Products also feature 3 MHz unity gain bandwidth while operating on 240 Â-µA supply current, yielding power-to-performance ratio of 80 µA per MHz. All devices - LMV831 single, LMV832 dual, LMV834 quad - minimize need for...

Read More »
Electronic Amplifiers

Audio Subsystem is suited for portable devices.

With 2 stereo single-ended inputs that can be configured as single stereo differential input, Model TPA2050D4 audio subsystem includes stereo Class-D amplifier that provides 1.4 W per channel output drive capability into 8 Ohm loudspeakers with 90% efficiency to extend battery life in portable applications. It also features low-noise stereo DirectPath(TM) headphone amplifier that eliminates need...

Read More »
Electronic Amplifiers

RF Power Detector, Log Amp promote wireless performance.

Integrated crest-factor RF power detection IC, ADL5502, combines rms RF detector and envelope detector. Featuring ±0.1 dB accuracy with crest factors up to 11 dBm, it enables cell phone designers to manage wireless handset power, extend battery life, and process complex 3G/4G signals. Logarithmic amplifier, ADL5513, offers 80 dB dynamic range with ±3 dB log conformance up to 4 GHz to...

Read More »
Electronic Amplifiers

Differential Amplifiers can drive 14- and 16-bit ADCs.

Consuming less than 120 mW of power on single 3.3 V supply, single channel ADA4939-1 and dual channel ADA4939-2 differential amplifiers achieve 82 dB SFDR at 70 MHz. Operating over -40 to 105°C temperature range for both 3.3 and 5 V operation, units feature input voltage noise of 2.3 nV/rt Hz, -3 dB bandwidth of 1.4 GHz, and slew rate of 5,000 V/Â-µS. Model ADA4939-2 can drive dual...

Read More »
Electronic Amplifiers

IC Pair acts as direct conversion receiver solution.

Quadrature demodulator (ADL5380), operating from 400 MHz to 6 GHz, and companion 2-channel digital gain trim amplifier (AD8366) enable and integrate direct conversion radio receivers in cellular 3G/4G and broadband wireless 802.16 applications. With ADL5380, base station receivers can be designed for various cellular and broadband wireless data systems and standards. Features for AD8366 include...

Read More »
Low Noise Amplifiers offer optimal IP3 headroom.
Electronic Amplifiers

Low Noise Amplifiers offer optimal IP3 headroom.

Drawing 425 mA from 12 V supply, Models JCA02-4000, JCA24-4001, and JCA48-4000 feature frequency bands of 0.5-2, 2-4, and 4-8 GHz, respectively. Units offer noise figures under 2 dB up through C-Band, output P1dB levels of +24 dBm, and output IP3 headroom levels of 15 dB or greater above output P1dB compression point. In addition, LNAs deliver saturated output power levels approaching +27 dBm,...

Read More »
Power Amplifier features 6-18 GHz frequency range.
Electronic Amplifiers

Power Amplifier features 6-18 GHz frequency range.

Designed for defense electronics and homeland security industries, CHPA0618-1 ultra-broadband power amplifier incorporates GaAs MMIC technology into Spatium(TM) broadband spatial combining architecture. Unit has multiple element architecture that provides protection from single point failures and enables dispersive, 3D heat dissipation. Featuring 40 W typical saturated power, it includes...

Read More »
Broadband Amplifier covers 100 MHz to 6 GHz frequency range.
Electronic Amplifiers

Broadband Amplifier covers 100 MHz to 6 GHz frequency range.

Housed in 1.25 x 1.25 x 0.59 in. aluminum enclosure with 3 SMA connectors, Model CRBAMP-100-6000 RedBox is low-noise general purpose connectorized amplifier featuring signal gain of 18 dB with output power of 17 dBm (P1dB). It also features typical noise figure of 3.5 dB with IP3 of +30 dBm. Suited for IF or RF buffer amplifiers, base stations, high-reliability applications, and general lab use,...

Read More »
Electronic Amplifiers

Video Filter Amp lets portable devices output SD signals.

Supplied in 1 x 1 mm, 4-bump UCSP(TM), MAX9515 analog video filter amp combines active-filter stage with video amp to band-limit signal and set video-output level to drive SD connection from any portable device to SDTV. Fifth-order filter features ±1 dB passband flatness up to 9 MHz and 50 dB attenuation at 27 MHz, ensuring signal integrity in compact designs. SmartSleep technology reduces...

Read More »
Delivery Equipment That Really Delivers
Sponsored

Delivery Equipment That Really Delivers

Are you in need of safer, more efficient transportation equipment? Do you feel like your delivery equipment could really use an upgrade? Check out this video, and learn about Halo Ramp Company's patented safety platforms, and how they help you bypass your trickiest delivery challenges.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers