Electronic Amplifiers

Electronic Amplifiers

IF Amplifier is digitally programmable.

Featuring 48 dBm OIP3 (output 3rd order intercept) at 200 MHz, LT5554 enables high dynamic range performance in ADC systems. It settles in less than 5 ns from gain change, while gain is digitally controlled from 2-18 dB by 7-bit parallel word, producing 0.125 dB steps gain control granularity. Powered from single 5 V supply, unit draws nominal supply current of 200 mA, has gain accuracy of...

Read More »
Electronic Amplifiers

Filters/ADC Drivers suit I/Q demodulator channel filtering.

Broadband active filters/ADC driver amplifiers include LTC6603, LTC6601-1, LTC6605-7, LTC6605-10, and LTC6605-14. Model LTC6603 features dual matched programmable ninth-order switched capacitor linear-phase filter and ADC driver, where as LTC6601-1, is low noise 0.5% tolerance lowpass active filter and ADC driver with configurable bandwidth from 5-28 MHz. LTC6605-7/-10/-14, are second-order...

Read More »
Electronic Amplifiers

National Semiconductor Delivers Industry's Best Linearity Performance with New High-Speed, 16-Bit ADC and DVGA

PowerWise Signal Path Products Deliver Unparalleled 90.6 dBFS SFDR for Multi-Carrier GSM Base Stations November 11, 2008 - Two new high-speed signal path products, a 16-bit, 130 mega-samples per second (MSPS) analog-to-digital converter (ADC) and a digital-controlled variable gain amplifier (DVGA), were announced today by National Semiconductor Corp. They deliver the industry's best linearity...

Read More »
Electronic Amplifiers

L-com Announces Addition of HyperLink Wireless Line to Portfolio of Products

December 2, 2008 Combination creates availability of wired and wireless solutions from one source NORTH ANDOVER, Mass., December 2, 2008 - L-com, a global leader in the manufacture of wired and wireless connectivity solutions, today announced the expansion of its product offerings to include the Hyperlink line of wireless components. This expansion enables L-com to provide almost 8,000 products...

Read More »
Fiber-Optic Amps offer flexibility, programming options.
Electronic Amplifiers

Fiber-Optic Amps offer flexibility, programming options.

Equipped with dual digital display, WLL190T-2 series can be used in stand-alone mode or as part of bus with up to 16 sensors connected together. Another fiber-optic amplifier, WLL170T-2, offers teach-in options with either on-amplifier adjustment or adjustment via external teach wire. Units are suited for part detection tasks in electronics, pharmaceutical, assembly and handling, and robotics...

Read More »
Electronic Amplifiers

Analog Switch/Audio Amplifier helps conserve design space.

Consolidating dual SPST analog switch achieving -80 dB isolation and 1.6 W class-D amplifier into 3 x 3 mm package, TS4961T simplifies board design in cell phones and media players. It operates within 2.4-4.3 V supply range, consumes 2 mA operating current at 3 V, and features 10 nA shutdown mode to promote battery life. Filterless amplifier, which drives up to 1.6 W into 4 Ohm load or 0.95 W...

Read More »
Electronic Amplifiers

Amplifier features programmable gain and offset.

Incorporating one-wire, UART-compatible digital serial interface, PGA308 amplifies sensor signal and provides digital calibration for zero and span. Using auto-zero techniques, device achieves precision and noise over extended industrial temperature range of -40°C to +125°C and has operating voltage of 2.7-5.5 V. Amplifier can store 7 banks of one-time programmable memory of gain and...

Read More »
Electronic Amplifiers

Pallet Amplifier is designed for FM and HDFM radio broadcast.

Operating from -10 to +60°C, FM550-108 pallet broadcast amplifier delivers 500-600 W CW output power, up to 82% collector efficiency, and harmonic suppression of -30 dBc. It features Freescale(TM) MRF6V2300NBR1 LDMOS transistor, and offers typical gain of 21 dB, which allows system designer to supply only 4.5 W input power. Class B amplifier is suited for FM transmitter, transposer, and...

Read More »
Isolation Amplifier is suited for hybrid electric vehicles.
Electronic Amplifiers

Isolation Amplifier is suited for hybrid electric vehicles.

Qualified to AEC-Q100 automotive stress test requirements, ACPL-782T delivers typical isolation and common mode noise rejection of 15 kV/Â-µs @ 1kV VCM typ. Its ±2% gain tolerance ensures accurate measurement and stability over time needed to monitor motor current or voltage in high-noise motor control environments. Rated for -40 to 125°C operation, amplifier offers...

Read More »
Modules simplify microwave/RF communications system design.
Electronic Amplifiers

Modules simplify microwave/RF communications system design.

Wide-band VHF power amplifier modules, MAPM-020512-010C00(10 W) and MAPM-020512-040C00(40 W) shorten final application design stage in mobile, portable and base station communication systems. Multi-modulation modules consist of driver and output stage with built-in amplitude equalization and feedback networks. MAPM-020512-010C00 features ALC control pin for signal modulation, tight gain flatness...

Read More »

All Topics